REXROTH VT-HNC100.C-30/P-S-00/000 Digital Axis Control | Replacement, Equivalent & Selection Guide
The REXROTH VT-HNC100.C-30/P-S-00/000 is a high-performance digital axis controller from Bosch Rexroth’s VT-HNC100 series, designed for precise closed-loop control of hydraulic axes in demanding industrial automation environments. This page provides full technical specifications, compatible replacement models, application guidance, and sourcing information to help engineers and procurement teams make confident selection decisions.
Technical Specifications
- Manufacturer: Bosch Rexroth AG
- Part Number: VT-HNC100.C-30/P-S-00/000
- Series: VT-HNC100
- Function: Digital Axis Controller for Hydraulic Systems
- Control Axes: Single-axis closed-loop position/force/velocity control
- Interface: PROFIBUS-DP / Analog I/O
- Supply Voltage: 24 VDC (±10%)
- Power Consumption: Approx. 10 W
- Operating Temperature: 0 °C to +50 °C
- Storage Temperature: -25 °C to +70 °C
- Protection Class: IP20
- Mounting: DIN rail or panel mount
- Weight: Approx. 8.8 kg (packaged)
- Certifications: CE, UL (refer to Rexroth datasheet for current approvals)
- Programming: Rexroth IndraWorks / WinHNC configuration software
Compatible Replacement & Equivalent Models
The following models are functionally compatible or serve as direct/near-direct replacements for the VT-HNC100.C-30/P-S-00/000. Always verify firmware version and I/O configuration before substitution.
- REXROTH VT-HNC100.C-31/P-S-00/000 — Upgraded firmware variant; pin-compatible, same form factor
- REXROTH VT-HNC100.C-30/P-S-01/000 — Extended I/O option variant; verify wiring diagram
- REXROTH VT-HACD-1-1X/V0/0-0-0 — Next-generation axis controller; requires software migration
- REXROTH VT-HNC100.C-08/P-S-00/000 — 8-axis variant for multi-axis applications
- Moog D136-001-007 — Third-party equivalent for hydraulic axis control; verify protocol compatibility
- Parker Hannifin IQAN-MD4 — Alternative platform; requires application re-engineering
Note: Konmask.com recommends using original Rexroth parts wherever possible. Contact our technical team for substitution validation support.
Why Choose the Original Model
- Proven Reliability: VT-HNC100 series has decades of field deployment in heavy industry, press, and injection molding applications
- Native Rexroth Ecosystem: Seamless integration with Rexroth hydraulic valves, sensors, and IndraWorks engineering software
- Precise Closed-Loop Performance: Sub-millisecond cycle times with adaptive PID and feedforward control algorithms
- Reduced Commissioning Time: Pre-configured axis templates and auto-tuning functions minimize setup effort
- Long-Term Support: Rexroth provides extended spare parts availability and firmware updates for VT-HNC100 series
- Regulatory Compliance: CE-marked and suitable for machinery directive compliance in EU markets
Typical Applications
- Hydraulic press position and force control
- Injection molding machine axis synchronization
- Metal forming and stamping equipment
- Steel mill roll gap control
- Test bench and simulation rigs
- Marine and offshore hydraulic actuator control
- Industrial robots with hydraulic drives
System Compatibility
- PLC Integration: Compatible with Siemens S7-300/400/1500, Beckhoff TwinCAT, Allen-Bradley ControlLogix via PROFIBUS-DP or analog interface
- Rexroth Valves: Direct compatibility with VT-VSPA2, VT-VRPA, and 4WRPH series proportional valves
- Sensors: Supports SSI, analog ±10 V, and 4–20 mA position/pressure feedback
- Software: WinHNC V3.x and above; IndraWorks 12.x and above
- Bus Systems: PROFIBUS-DP (12 Mbit/s), optional CANopen (check variant suffix)
Selection Guide
Use the following criteria to confirm the VT-HNC100.C-30/P-S-00/000 is the correct model for your application:
- Number of Axes: Single-axis applications → C-30 variant. Multi-axis → consider C-08 or C-16 variants
- Fieldbus Requirement: PROFIBUS-DP → P-S suffix. CANopen → check C-S suffix variants
- I/O Expansion: Standard I/O → /000 suffix. Extended I/O → /001 or /002 suffix
- Control Mode: Position, velocity, force, or combined — all supported natively
- Environment: IP20 rated — suitable for control cabinet installation only
- Power Supply: Confirm 24 VDC availability at installation point
If your application requires multi-axis synchronization, higher IP rating, or EtherCAT connectivity, contact Konmask.com for an upgraded model recommendation.
Quality Assurance & Sourcing
- Source: Authorized distributors and verified surplus channels with full traceability
- Inspection: Each unit undergoes visual inspection, label verification, and functional pre-check before shipment
- Packaging: Anti-static ESD packaging with original or equivalent protective foam
- Documentation: Certificate of conformity and test report available upon request
- Warranty: 12-month warranty against manufacturing defects (see Konmask.com warranty policy)
- Counterfeit Prevention: All units sourced from traceable supply chains; serial number verification available
How to Order
- Step 1: Confirm part number: VT-HNC100.C-30/P-S-00/000
- Step 2: Specify quantity and required delivery timeline
- Step 3: Submit inquiry via product page or email support@konmask.com
- Step 4: Receive quotation within 1 business day
- Step 5: Confirm order and arrange payment (T/T, PayPal, or credit terms for qualified accounts)
- Step 6: Shipment via DHL / FedEx / sea freight with full tracking
For urgent requirements or large-volume orders, call us directly: +0086 19859288691
Replacement & Compatibility FAQ
Q: Can I replace VT-HNC100.C-30/P-S-00/000 with a C-31 variant?
A: Yes, the C-31 is a firmware-upgraded variant with the same hardware footprint. Verify that your WinHNC software version supports C-31 before swapping.
Q: Is the VT-HNC100 compatible with Siemens S7-1500?
A: Yes, via PROFIBUS-DP. Ensure the GSD file for VT-HNC100 is loaded in TIA Portal and the DP address matches your configuration.
Q: What is the lead time for this part?
A: In-stock units ship within 3–5 business days. Out-of-stock items typically have a 4–8 week lead time. Contact us for current availability.
Q: Do you provide a warranty for surplus/refurbished units?
A: Yes. All units carry a 12-month warranty. Refurbished units are clearly labeled and priced accordingly.
Q: Can Konmask.com assist with commissioning or technical support?
A: We provide pre-sales technical consultation. For on-site commissioning, we can refer certified Rexroth service partners in your region.
Q: What if my exact part number suffix is different?
A: VT-HNC100 variants differ by axis count, fieldbus, and I/O options. Send us your full part number and application details — we will confirm compatibility or recommend the correct variant.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
