Siemens 6AV6671-1CB00-0AX2 Multi Media Card | Replacement, Equivalent & Selection Guide
The Siemens 6AV6671-1CB00-0AX2 is an original Multi Media Card (MMC) designed for use with Siemens SIMATIC HMI operator panels. It provides reliable non-volatile storage for project data, recipes, data logs, and firmware backups. This page serves as a comprehensive selection and replacement reference for engineers, procurement teams, and system integrators sourcing this component.
Technical Specifications
- Part Number: 6AV6671-1CB00-0AX2
- Product Family: SIMATIC HMI Multi Media Card
- Manufacturer: Siemens AG
- Card Type: Multi Media Card (MMC)
- Storage Capacity: 64 MB
- Interface: MMC slot (SIMATIC HMI panels)
- Operating Temperature: 0 °C to +60 °C
- Weight: Approx. 2 g
- Dimensions: Standard MMC form factor (32 × 24 × 1.4 mm)
- Certifications: CE, UL
- Country of Origin: Germany / EU
Compatible Replacement & Equivalent Models
When the original 6AV6671-1CB00-0AX2 is unavailable or discontinued, the following Siemens-original alternatives and third-party equivalents may be considered. Always verify firmware and panel compatibility before substitution.
- 6AV6671-1CB00-0AX2 — Original Siemens MMC 64 MB (this item)
- 6AV6671-1CA00-0AX2 — Siemens MMC 32 MB (lower capacity, same interface)
- 6AV6671-1CC00-0AX2 — Siemens MMC 128 MB (higher capacity, same interface)
- 6AV6671-1CD00-0AX2 — Siemens MMC 256 MB (extended storage, same interface)
- 6AV6671-5AE00-0AX0 — Siemens USB Flash Drive 2 GB (for panels with USB port)
- Third-party industrial MMC 64 MB (SLC NAND, MMC 4.x compliant) — verify compatibility with panel firmware version
Note: Siemens recommends using only original Siemens memory cards to ensure data integrity and warranty compliance.
Why Choose the Original Model
- Guaranteed Compatibility: Factory-tested with all SIMATIC HMI panels featuring an MMC slot.
- Data Integrity: Industrial-grade SLC NAND flash ensures reliable read/write cycles in harsh environments.
- Firmware Support: Supports panel firmware updates and project transfers via WinCC flexible and TIA Portal.
- Long Service Life: Rated for extended write endurance compared to consumer-grade cards.
- Siemens Warranty: Covered under Siemens standard product warranty when purchased from authorized channels.
Typical Applications
- Project data storage and transfer for SIMATIC HMI TP, OP, and MP series panels
- Recipe management and data logging in food & beverage, pharmaceutical, and manufacturing lines
- Firmware backup and panel cloning during maintenance or panel replacement
- Alarm and event log archiving in process automation systems
- Machine tool HMI data management (CNC, press, injection molding)
System Compatibility
The 6AV6671-1CB00-0AX2 is compatible with the following Siemens SIMATIC HMI panels (non-exhaustive list):
- SIMATIC TP 177A, TP 177B, TP 270, TP 370, TP 570, TP 1500
- SIMATIC OP 177B, OP 270, OP 370
- SIMATIC MP 270B, MP 370, MP 377
- SIMATIC Mobile Panel 177, Mobile Panel 277
- Panels running WinCC flexible 2004 SP1 and later, or TIA Portal WinCC (RT Advanced)
Always cross-reference your panel order number and firmware version in Siemens Industry Online Support (SIOS) before ordering.
Selection Guide
Use the guide below to select the correct MMC capacity for your application:
- Small projects (<10 MB): 6AV6671-1CA00-0AX2 (32 MB) — sufficient for basic HMI projects
- Standard projects (10–50 MB): 6AV6671-1CB00-0AX2 (64 MB) — recommended for most applications
- Large projects / data logging (50–100 MB): 6AV6671-1CC00-0AX2 (128 MB)
- Extended data archiving (>100 MB): 6AV6671-1CD00-0AX2 (256 MB)
- USB-equipped panels: 6AV6671-5AE00-0AX0 (USB Flash Drive 2 GB)
If unsure which capacity is required, consult your WinCC flexible or TIA Portal project size report, or contact our technical team at support@konmask.com.
Quality Assurance & Sourcing
- All units sourced from authorized Siemens distributors or verified industrial surplus channels.
- Each card undergoes incoming inspection: visual check, read/write functional test, and capacity verification.
- Original Siemens packaging and labeling preserved where available.
- Counterfeit-risk screening applied to all non-factory-sealed stock.
- Certificate of conformity available upon request for regulated industries.
How to Order
- Confirm your HMI panel model and current firmware version.
- Select the correct MMC capacity using the Selection Guide above.
- Add 6AV6671-1CB00-0AX2 to cart or contact us for bulk/project pricing.
- Provide your shipping address — we ship worldwide with DHL, FedEx, and UPS Express options.
- Receive order confirmation and tracking within 1 business day.
For urgent requirements or large-quantity orders, email support@konmask.com or call +0086 19859288691.
Replacement & Compatibility FAQ
Q: Can I use a standard consumer MMC card instead of the Siemens 6AV6671-1CB00-0AX2?
A: Not recommended. Consumer MMC cards may not meet the industrial temperature range, write endurance, or MMC specification version required by SIMATIC panels, and may cause data loss or panel errors.
Q: Is the 6AV6671-1CB00-0AX2 still in production?
A: Siemens has transitioned some HMI accessories to newer form factors. Availability may vary. Contact us to confirm current stock status.
Q: Can a higher-capacity card (e.g., 128 MB) replace the 64 MB card?
A: In most cases yes, provided the panel firmware supports the larger capacity. Always verify in the panel operating instructions or Siemens SIOS documentation.
Q: How do I transfer a project to the MMC?
A: Use WinCC flexible or TIA Portal’s Download to Memory Card function, or use the panel’s built-in backup/restore menu with the card inserted.
Q: Do you provide a warranty on this product?
A: Yes. We offer a 12-month warranty on all original Siemens parts. Third-party equivalents carry a 6-month warranty. See our Returns & Warranty Policy for details.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691


