Siemens 6SA8252-0AC70 Control Board | Replacement, Equivalent & Selection Guide
The Siemens 6SA8252-0AC70 is a control board designed for the SIMOVERT P series AC variable-frequency drive systems. It serves as the core processing and regulation unit responsible for PWM signal generation, speed feedback processing, fault diagnostics, and drive coordination. This page provides a comprehensive selection guide, compatible replacement options, and technical specifications to help engineers and procurement teams make informed sourcing decisions.
Technical Specifications
- Part Number (SKU): 6SA8252-0AC70
- Manufacturer: Siemens AG
- Series: SIMOVERT P
- Component Type: Control Board / Regulator Board
- Function: Drive control, PWM regulation, speed/torque feedback processing
- Compatible Drive Series: SIMOVERT P (6SA82xx family)
- Weight: Approx. 500 g
- Condition Available: New, Refurbished, Tested Used
- Origin: Germany (Siemens AG)
Compatible Replacement & Equivalent Models
When the 6SA8252-0AC70 is unavailable or discontinued, the following models may serve as functional equivalents or drop-in replacements depending on your drive configuration. Always verify firmware version and hardware revision before substitution.
- 6SA8252-0AC71 — Revised hardware revision of the same board; pin-compatible in most SIMOVERT P frames
- 6SA8252-0AC60 — Earlier revision; functionally similar, may require firmware alignment
- 6SA8251-0AC70 — Adjacent series control board; verify frame size and connector layout
- 6SE7090-0XX84-0AB0 — SIMOVERT MASTERDRIVES control board (different series; verify compatibility with system integrator)
- Third-party compatible boards — Available from certified repair centers; must match PWM interface and feedback signal specifications
Note: Konmask.com recommends consulting the SIMOVERT P system documentation or contacting our technical team before substituting control boards in live production environments.
Why Choose the Original 6SA8252-0AC70
- ✅ Guaranteed OEM compatibility — factory-matched to SIMOVERT P drive hardware
- ✅ Stable firmware baseline — no re-parameterization risk from hardware revision mismatches
- ✅ Proven field reliability — widely deployed in industrial motor control applications since the SIMOVERT P era
- ✅ Full diagnostic support — integrates natively with Siemens STARTER and DriveMonitor tools
- ✅ Traceable sourcing — Konmask.com provides documentation of origin and test records on request
Typical Applications
- AC variable-frequency drive (VFD) control in industrial motor systems
- Pump, fan, compressor, and conveyor speed regulation
- Retrofit and maintenance replacement in legacy SIMOVERT P installations
- Steel, paper, chemical, and water treatment plant automation
- OEM machine builders using Siemens SIMOVERT P drive platforms
System Compatibility
The 6SA8252-0AC70 is designed for use within the Siemens SIMOVERT P (6SA82xx) drive family. Compatibility with adjacent series (SIMOVERT MASTERDRIVES, SINAMICS G/S) is not guaranteed without engineering review. Key compatibility checkpoints:
- Drive frame size and power rating
- Firmware version on the existing drive unit
- Feedback encoder interface type (HTL/TTL/resolver)
- Communication interface (USS, PROFIBUS, analog)
Selection Guide
Use the following criteria to confirm the 6SA8252-0AC70 is the correct board for your application:
- Step 1: Confirm your drive model is within the SIMOVERT P 6SA82xx series
- Step 2: Identify the existing control board part number from the drive nameplate or service manual
- Step 3: Match hardware revision suffix (-0AC70) — do not substitute revisions without checking Siemens compatibility notes
- Step 4: Verify encoder and communication interface requirements match your system wiring
- Step 5: Contact Konmask.com with your drive serial number for final confirmation if uncertain
Quality Assurance & Sourcing
All Siemens 6SA8252-0AC70 units supplied by Konmask.com undergo the following quality process:
- Visual inspection for physical damage, corrosion, and component integrity
- Functional power-on test where applicable
- Anti-static packaging and secure international shipping
- Documentation available: test reports, photos, and traceability records on request
- Warranty: 90-day replacement warranty on all tested units
How to Order
- Online: Add to cart directly on this page
- Email: support@konmask.com — include your drive model, serial number, and required quantity
- Phone/WhatsApp: +0086 19859288691
- Lead Time: In-stock units ship within 1–3 business days; sourced units 5–15 business days
- Payment: T/T, PayPal, credit card, and trade assurance accepted
Replacement & Compatibility FAQ
Q: Can I use 6SA8252-0AC71 instead of 6SA8252-0AC70?
A: In most cases yes — the -0AC71 is a revised hardware version. However, confirm firmware compatibility with your drive unit before installation.
Q: Is this board compatible with SINAMICS drives?
A: No. The 6SA8252-0AC70 is specific to the SIMOVERT P platform and is not interchangeable with SINAMICS G120, S120, or other series.
Q: Do you supply refurbished units?
A: Yes. Refurbished units are fully tested and come with a 90-day warranty. Please specify your preference when ordering.
Q: Can Konmask.com help identify the correct replacement if my board is damaged?
A: Yes — send us photos of the damaged board and your drive nameplate to support@konmask.com and we will advise on the best replacement option.
Q: What is the typical lead time for out-of-stock units?
A: Sourced units typically arrive within 5–15 business days depending on origin and shipping method.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691


