YOKOGAWA NFDV561-P00 Digital Output Module | Replacement, Equivalent & Selection Guide
The YOKOGAWA NFDV561-P00 is a high-reliability Digital Output (DO) module designed for use in YOKOGAWA CENTUM VP Distributed Control Systems (DCS). This module provides precise digital signal output for industrial process control applications. Konmask.com supplies both genuine OEM units and verified compatible replacements to support your automation system uptime.
Technical Specifications
- Part Number: NFDV561-P00
- Manufacturer: YOKOGAWA Electric Corporation
- Module Type: Digital Output (DO) Module
- Series: CENTUM VP / CENTUM CS 3000 Compatible
- Output Channels: 16-point digital output (typical for NFD series)
- Output Type: Transistor / Relay (contact factory for exact spec)
- Communication: Vnet/IP fieldbus compatible
- Power Supply: 24 VDC (system bus powered)
- Operating Temperature: 0°C to 55°C
- Mounting: DIN rail / backplane slot mount
- Certifications: CE, UL (verify with datasheet)
- Weight: Approx. 100 g
Note: Always verify specifications against the official YOKOGAWA datasheet before installation.
Compatible Replacement & Equivalent Models
If the NFDV561-P00 is discontinued or on extended lead time, the following models may serve as functional equivalents or drop-in replacements (subject to system compatibility verification):
- YOKOGAWA NFDV561-P10 — Variant with extended I/O options
- YOKOGAWA NFDV141-P00 — Alternative DO module in NFD series
- YOKOGAWA NFDV142-P00 — Higher channel count DO module
- YOKOGAWA AMM12D — Legacy CENTUM CS 3000 DO card (verify backplane compatibility)
- Third-party equivalents — Contact Konmask.com for cross-reference analysis
⚠ Important: Always confirm firmware version, backplane slot type, and system software compatibility before substituting modules.
Why Choose the Original NFDV561-P00
- ✅ Guaranteed OEM compatibility — plug-and-play with CENTUM VP systems
- ✅ Factory-calibrated — no additional configuration required
- ✅ Full YOKOGAWA warranty support — traceable serial numbers
- ✅ Stable long-term supply — Konmask maintains safety stock for critical spares
- ✅ Proven reliability — deployed in petrochemical, power, and pharmaceutical plants globally
Typical Applications
- Oil & Gas refinery DCS control loops
- Chemical and petrochemical process automation
- Power generation plant control systems
- Pharmaceutical batch process control
- Pulp & paper and water treatment facilities
- Any CENTUM VP / CS 3000 based control architecture
System Compatibility
- YOKOGAWA CENTUM VP (R4.xx, R5.xx, R6.xx)
- YOKOGAWA CENTUM CS 3000 (verify slot and firmware)
- Vnet/IP Network — standard YOKOGAWA fieldbus
- FCS (Field Control Station) — compatible with AFV10D, AFV30D, etc.
Not compatible with YOKOGAWA STARDOM, ProSafe-RS, or third-party DCS platforms without engineering adaptation.
Selection Guide
Use this guide to confirm the correct DO module for your CENTUM VP system:
- Step 1 — Identify your FCS model: AFV10D / AFV30D / AFVR10D
- Step 2 — Check backplane slot type: NFD-series slot required for NFDV561-P00
- Step 3 — Confirm output type needed: Transistor sink/source or relay contact
- Step 4 — Verify channel count: 16-point DO sufficient for your loop count?
- Step 5 — Check system software version: CENTUM VP R4 or above recommended
- Step 6 — Contact Konmask: Send your existing module label photo for exact cross-reference
Quality Assurance & Sourcing
- 🔍 100% authenticity verification — all units inspected before shipment
- 📦 Original packaging — ESD-safe anti-static packaging maintained
- 📋 Traceability documentation — COC (Certificate of Conformance) available on request
- 🏭 Sourced from authorized distributors and verified surplus channels
- 🔄 Refurbished units available — tested to OEM specifications with 90-day warranty
How to Order
- Add YOKOGAWA NFDV561-P00 to cart and proceed to checkout
- Or contact us directly for bulk orders, urgent requirements, or cross-reference requests
- Provide your system model and existing module part number for fastest response
- Lead time: In-stock units ship within 1–3 business days; sourced units 5–15 business days
📧 Email: support@konmask.com
📞 Phone/WhatsApp: +0086 19859288691
🌐 Website: https://Konmask.com
Replacement & Compatibility FAQ
Q: Can NFDV561-P00 replace NFDV141-P00 directly?
A: Not always. Channel count and output type may differ. Contact us for a detailed cross-reference.
Q: Is a refurbished NFDV561-P00 reliable for critical process control?
A: Yes, when tested to OEM specs. Konmask provides test reports and a 90-day warranty on all refurbished units.
Q: Do you supply NFDV561-P00 with a Certificate of Conformance?
A: Yes. COC is available upon request for all orders.
Q: What is the lead time for NFDV561-P00?
A: In-stock units ship in 1–3 business days. Contact us to confirm current stock status.
Q: Can I use a third-party DO module instead of NFDV561-P00?
A: Third-party modules are not officially supported by YOKOGAWA. Engineering validation is required. Contact Konmask for guidance.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
