Genuine B+W BWU1569 - Industrial Automation Part

B+W BWU1569 PROFIBUS Gateway

SKU: BWU1569 Category: Other Parts

Description

B+W BWU1569 PROFIBUS Gateway | Replacement, Equivalent & Selection Guide

The B+W BWU1569 is an industrial PROFIBUS gateway designed to bridge communication between PROFIBUS DP networks and other fieldbus or serial protocols. This page provides full technical specifications, compatible replacement models, application guidance, and a structured selection guide to help engineers and procurement teams make confident sourcing decisions.

Technical Specifications

Model: BWU1569
Brand: B+W (Bihl+Wiedemann)
Function: PROFIBUS DP Gateway / Protocol Converter
Communication Interface: PROFIBUS DP (RS-485)
Supply Voltage: 24 V DC (typical; verify with datasheet)
Protection Class: IP20 (DIN rail mount)
Weight: 500 g (approx.)
SKU / Part Number: BWU1569
Compliance: CE marked; designed for industrial automation environments

Note: Always verify specifications against the official B+W datasheet before final design-in. Contact us if you need the datasheet.

Compatible Replacement & Equivalent Models

If the BWU1569 is discontinued, long lead-time, or outside budget, the following models may serve as functional equivalents depending on your system architecture. Verify compatibility with your PLC/DCS before substitution.

Bihl+Wiedemann BWU2405 – Newer-generation PROFIBUS gateway with extended diagnostics
Siemens 6GK1415-2AA10 – PROFIBUS DP/PA Link, suitable for similar gateway roles
Moxa MGate MB3170 – PROFIBUS to Modbus gateway for cross-protocol bridging
HMS Anybus X-gateway AB7007 – PROFIBUS DP slave gateway, widely used as a drop-in alternative
Hilscher CIFX 50-DP – PC-based PROFIBUS DP master/slave card for embedded integration

Disclaimer: Replacement suitability depends on firmware version, network topology, and application requirements. Konmask.com recommends engineering validation before substitution.

Why Choose the Original Model

Proven field reliability – BWU1569 has an established track record in European and Asian industrial installations.
OEM compatibility – Guaranteed interoperability with existing B+W AS-Interface and PROFIBUS system architectures.
Reduced integration risk – No firmware re-mapping or parameter re-configuration required when replacing like-for-like.
Spare parts continuity – Maintaining original part numbers simplifies MRO procurement and audit trails.

Typical Applications

Factory automation: connecting AS-Interface sensor/actuator networks to PROFIBUS DP masters
Process industries: integrating field devices in chemical, pharmaceutical, and food & beverage plants
Machine building: OEM panel integration where PROFIBUS is the plant-level fieldbus standard
Retrofit projects: upgrading legacy serial networks to PROFIBUS without replacing field devices
Automotive assembly lines: high-cycle, deterministic I/O communication via PROFIBUS DP

System Compatibility

The BWU1569 is compatible with PROFIBUS DP masters from leading PLC and DCS vendors, including:

Siemens: S7-300, S7-400, S7-1500 (via CP modules), TIA Portal-configured networks
ABB: AC500 PLC series with PROFIBUS DP master modules
Schneider Electric: Modicon M340 / M580 with PROFIBUS option cards
Rockwell Automation: Via PROFIBUS scanner cards (1784-PCMK, etc.)
Beckhoff: TwinCAT PROFIBUS master fieldbus cards
Mitsubishi: MELSEC Q/iQ-R series with PROFIBUS-DP master modules

GSD file availability: Contact Konmask.com for the BWU1569 GSD file required for PLC configuration.

Selection Guide

Use the following criteria to confirm the BWU1569 is the right gateway for your application, or to identify the best alternative:

Step 1 – Define your fieldbus topology: Confirm PROFIBUS DP is the master-side protocol. If PROFIBUS PA or Modbus RTU is required, a different gateway model applies.
Step 2 – Count I/O nodes: Verify the number of AS-Interface slaves or serial devices to be connected does not exceed the BWU1569’s node limit.
Step 3 – Check baud rate requirements: PROFIBUS DP supports up to 12 Mbit/s; confirm your cable length and topology support the target baud rate.
Step 4 – Power supply: Confirm 24 V DC availability at the installation point.
Step 5 – Environmental rating: IP20 is suitable for control cabinet installation. For harsh environments, consider an IP65/67-rated enclosure or alternative model.
Step 6 – Firmware & GSD version: Match the GSD file version to your PLC’s PROFIBUS configuration tool to avoid parameter mismatch errors.

Not sure which model fits? Email our engineers with your system topology and we will recommend the optimal solution.

Quality Assurance & Sourcing

Genuine parts: Konmask.com sources BWU1569 units directly from authorized distributors and verified OEM channels.
Inspection: All units undergo visual and functional pre-shipment inspection.
Traceability: Batch records and certificates of conformity available on request.
Anti-counterfeit: We do not source from grey-market channels. Serial number verification available for critical applications.
Warranty: 12-month warranty against manufacturing defects (terms apply).

How to Order

Online: Add to cart directly on this page and proceed to checkout.
RFQ / Bulk orders: Email support@konmask.com with quantity, required delivery date, and destination country.
Phone / WhatsApp: +0086 19859288691 (Mon–Fri, 09:00–18:00 CST)
Lead time: In-stock units ship within 1–3 business days. Ex-stock lead time varies; contact us for availability.
Export: We ship globally. DDP, DAP, and EXW Incoterms available. HS Code assistance provided.

Replacement & Compatibility FAQ

Q: Is the BWU1569 still in production?
A: Production status changes over time. Contact Konmask.com for the latest availability and lead-time information.

Q: Can I use the HMS Anybus X-gateway as a direct replacement?
A: Functionally similar, but GSD files and parameter sets differ. Re-configuration of the PROFIBUS master is required. Our engineers can assist.

Q: Do you supply the GSD file with the unit?
A: Yes. The GSD file is provided digitally upon order confirmation.

Q: What is the minimum order quantity (MOQ)?
A: MOQ is 1 unit for standard orders. Volume pricing available for 5+ units.

Q: Can Konmask.com provide a certificate of origin?
A: Yes, upon request for customs and import compliance purposes.

Q: Is the BWU1569 compatible with PROFIBUS PA?
A: No. The BWU1569 is a PROFIBUS DP gateway. For PROFIBUS PA integration, a DP/PA coupler or link is required.