Bently Nevada 200155-13-CN – Low Frequency Seismic Accelerometer | TrendMaster Pro Platform
Engineering Background: The Bently Nevada 200155-13-CN is a low-frequency seismic accelerometer engineered specifically for the TrendMaster Pro continuous online monitoring platform. Designed to capture sub-10 Hz vibration signatures on large rotating machinery — including turbines, compressors, pumps, and fans — this sensor delivers the spectral resolution that conventional accelerometers cannot achieve at low speeds.
Product Positioning: As an OEM-specified component within the Baker Hughes / Bently Nevada ecosystem, the 200155-13-CN integrates directly with TrendMaster Pro I/O modules without signal conditioning adapters. It is the preferred sensor for procurement engineers who require traceable, spec-compliant instrumentation for API 670-aligned machinery protection systems.
Complete Technical Specifications
- Part Number: 200155-13-CN
- Manufacturer: Bently Nevada (Baker Hughes)
- Series / Platform: TrendMaster Pro
- Sensor Type: Low Frequency Seismic Accelerometer (IEPE / ICP®-compatible)
- Frequency Range: 0.5 Hz – 1,000 Hz (–3 dB)
- Sensitivity: 100 mV/g (nominal)
- Measurement Range: ±50 g peak
- Resonant Frequency: ≥ 15 kHz
- Transverse Sensitivity: ≤ 5%
- Operating Temperature: –40 °C to +121 °C
- Electrical Connector: 2-pin MIL-C-5015 (per -CN suffix)
- Housing Material: Stainless Steel (hermetically sealed)
- Mounting: Stud mount (10-32 UNF)
- Weight: ~450 g
- Ingress Protection: IP67
- Compatible System: Bently Nevada TrendMaster Pro
- Compliance: API 670, CE
Proven Application Environments
- Steam and gas turbine bearing housings (low-speed monitoring)
- Centrifugal and reciprocating compressor casings
- Large cooling tower fan gearboxes
- Induced draft and forced draft fans in power generation
- Boiler feed pumps and condensate extraction pumps
- Offshore platform rotating equipment (ATEX-rated installations)
- Petrochemical plant critical machinery trains
Engineering Advantages
- Extended Low-Frequency Response: Captures sub-1 Hz vibration events invisible to standard industrial accelerometers — critical for slow-speed machinery (< 120 RPM).
- Plug-and-Play TrendMaster Pro Integration: Factory-calibrated to match TrendMaster Pro I/O card input impedance; no external signal conditioning required.
- Hermetic Stainless Steel Housing: Withstands wash-down, condensation, and hydrocarbon exposure in harsh plant environments.
- High Signal-to-Noise Ratio: Low noise floor (< 25 μg/√Hz) ensures reliable detection of early-stage bearing defects and structural resonances.
- Traceable Calibration: Each unit ships with NIST-traceable calibration certificate, supporting ISO 17025 audit requirements.
System Architecture & Signal Flow
The 200155-13-CN mounts directly to the machinery casing via stud mount. The IEPE output signal is routed via shielded cable to the TrendMaster Pro I/O module (e.g., 3500/42M or equivalent), which provides the constant-current excitation (2–20 mA, 18–30 VDC bias). The module digitizes the signal and transmits conditioned vibration data to the TrendMaster Pro rack for trending, alarming, and historian logging. Integration with DCS/SCADA systems is achieved via Modbus RTU, Modbus TCP, or OPC-DA/UA gateways.
Sourcing & Quality Verification
- All units sourced from authorized Bently Nevada / Baker Hughes distribution channels or verified surplus with full traceability documentation.
- Pre-shipment inspection includes: visual examination, connector integrity check, and sensitivity verification against OEM datasheet.
- NIST-traceable calibration certificate available upon request.
- Counterfeit-prevention: serial number cross-referenced against Bently Nevada product registry where applicable.
- Packaging: anti-static foam insert, moisture-barrier bag, original OEM box where available.
Procurement Process
- Submit your RFQ via the product page or email support@konmask.com with quantity and required delivery date.
- Receive a formal quotation with lead time, unit price, and shipping options within 24 business hours.
- Confirm purchase order — we accept T/T, L/C, and major credit cards.
- Shipment via DHL Express, FedEx International Priority, or sea freight for bulk orders.
- Post-delivery technical support available for integration and commissioning queries.
Technical FAQ
Q: Is the 200155-13-CN compatible with the 3500 Series rack?
A: The 200155-13-CN is designed for the TrendMaster Pro platform. For 3500 Series compatibility, please consult the Bently Nevada sensor selection guide or contact our engineering team.
Q: What does the “-CN” suffix indicate?
A: The “-CN” suffix designates the connector variant — a 2-pin MIL-C-5015 style connector, as opposed to the standard integral cable configuration.
Q: Can this sensor be used for proximity probe replacement?
A: No. This is a seismic (casing) accelerometer measuring absolute vibration. Proximity probes measure relative shaft displacement. They serve complementary but distinct measurement functions per API 670.
Q: What is the typical lead time?
A: In-stock units ship within 3–5 business days. Special-order or factory-new units typically require 4–8 weeks. Contact us for current availability.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






