Bently Nevada 200155-03-05 Low Frequency Trendmaster Pro Accelerometer | Replacement, Equivalent & Selection Guide
The Bently Nevada 200155-03-05 is a low-frequency accelerometer designed for the Trendmaster Pro continuous online monitoring system. It captures low-frequency vibration data from rotating machinery such as fans, compressors, and pumps, delivering reliable condition monitoring in demanding industrial environments. This page provides full technical specifications, compatible replacement models, and a structured selection guide to help engineers and procurement teams make informed decisions.
Technical Specifications
- Part Number: 200155-03-05
- Brand: Bently Nevada (Baker Hughes)
- Series: Trendmaster Pro
- Type: Low Frequency Accelerometer (Seismic / Casing Vibration)
- Measurement: Low-frequency casing / bearing housing vibration
- Output Signal: Compatible with Trendmaster Pro I/O modules
- Connector: Integral cable with Trendmaster Pro-compatible termination
- Weight: Approx. 1,370 g
- Housing: Industrial-grade, corrosion-resistant
- Mounting: Stud or adhesive mount (application-dependent)
- Operating Environment: Continuous online monitoring in industrial plants
Compatible Replacement & Equivalent Models
When the original 200155-03-05 is unavailable or end-of-life, the following models may serve as functional replacements depending on your system configuration. Always verify signal compatibility and mounting requirements before substitution.
- Bently Nevada 200155-03-01 — Same series, different cable/connector variant; verify termination compatibility
- Bently Nevada 200155-03-07 — Extended temperature variant; suitable for high-heat environments
- Emerson CSI A0760 — Third-party low-frequency accelerometer; verify Trendmaster Pro I/O compatibility
- PCB Piezotronics 603C01 — Industrial seismic accelerometer; requires signal conditioning adapter
- Wilcoxon Research 793L — Low-frequency accelerometer; widely used as cross-brand equivalent in casing monitoring
Note: Konmask.com recommends consulting your system integrator or Bently Nevada representative before substituting any sensor in a safety-critical monitoring loop.
Why Choose the Original Model
- Plug-and-play compatibility with Trendmaster Pro I/O modules — no signal conditioning required
- Factory-calibrated for accurate low-frequency response within the Trendmaster Pro ecosystem
- Proven reliability in continuous online monitoring across power generation, oil & gas, and petrochemical industries
- Simplified maintenance — direct replacement without reconfiguration of the monitoring system
- OEM traceability — full documentation and calibration certificates available
Typical Applications
- Casing vibration monitoring on centrifugal fans and blowers
- Bearing housing vibration on large pumps and compressors
- Low-speed machinery monitoring (below 600 RPM)
- Continuous online condition monitoring in power plants
- Predictive maintenance programs in oil & gas and petrochemical facilities
System Compatibility
- Primary System: Bently Nevada Trendmaster Pro Continuous Online Monitoring System
- Compatible I/O Modules: Trendmaster Pro Dynamic Data Manager (DDM) and associated I/O cards
- Software: System 1 Condition Monitoring & Diagnostics Software (Bently Nevada / Emerson)
- Not compatible with: 3500 Series rack-based monitoring system without signal adaptation
Selection Guide
Use the following criteria to confirm the 200155-03-05 is the correct model for your application:
- Frequency range: Select this model for low-frequency vibration (typically 2–1,000 Hz casing measurement)
- Machinery type: Best suited for large, slow-speed rotating equipment (fans, pumps, compressors)
- Monitoring system: Must be a Trendmaster Pro system; confirm I/O module slot type
- Cable length suffix: The “-05” suffix denotes a specific cable length — confirm your installation distance before ordering
- Environment: Standard industrial; for high-temperature or hazardous-area installations, specify the appropriate variant
- Mounting surface: Flat, clean bearing housing or casing surface recommended for optimal signal quality
Quality Assurance & Sourcing
Konmask.com sources the Bently Nevada 200155-03-05 through verified industrial automation supply channels. Each unit is:
- Inspected for physical integrity and connector condition prior to shipment
- Supplied with available OEM documentation and calibration records where applicable
- Packaged in anti-static, protective packaging to prevent transit damage
- Traceable to batch and sourcing records for quality audit purposes
We supply both new original and factory-refurbished units. Please specify your requirement at the time of inquiry.
How to Order
- Confirm your part number: Bently Nevada 200155-03-05
- Specify quantity and required delivery timeline
- Contact us via email: support@konmask.com
- Receive a formal quotation within 1 business day
- Confirm order and arrange payment — T/T, PayPal, and trade terms available for qualified buyers
Replacement & Compatibility FAQ
Q: Can I use the 200155-03-05 as a direct replacement for the 200155-03-01?
A: Both are in the same Trendmaster Pro accelerometer family. The suffix difference typically indicates cable length or connector variant. Verify the cable termination and length match your installation before substituting.
Q: Is the 200155-03-05 compatible with the Bently Nevada 3500 system?
A: No. This model is designed for the Trendmaster Pro system. The 3500 series uses different I/O architecture and dedicated transducers. Contact us if you need a 3500-compatible equivalent.
Q: Can a third-party accelerometer replace the 200155-03-05?
A: Functionally possible with appropriate signal conditioning, but Trendmaster Pro systems are optimized for OEM sensors. Third-party substitution may affect system accuracy and alarm thresholds. Always validate with your system integrator.
Q: What does the “-05” suffix mean in the part number?
A: The suffix denotes the cable length option. Confirm your installation distance and specify the correct suffix when ordering.
Q: Do you provide calibration certificates?
A: Yes, calibration documentation is available for new original units. Please request at the time of order.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






