Bently Nevada 200157-06-05 – Enveloping Trendmaster Pro Accelerometer | TrendMaster Pro Platform
Engineering Background
The Bently Nevada TrendMaster Pro platform has been the industry benchmark for continuous online machinery protection and condition monitoring since its introduction. Designed for rotating and reciprocating machinery in power generation, oil & gas, petrochemical, and heavy industrial environments, the system delivers real-time vibration data that enables predictive maintenance strategies and prevents catastrophic equipment failure.
Product Positioning
The 200157-06-05 is an Enveloping Accelerometer module engineered for the TrendMaster Pro distributed monitoring system. It captures high-frequency bearing defect signals using enveloping (demodulation) technology — isolating impulsive fault signatures from background vibration noise. This makes it the preferred sensor for early-stage rolling-element bearing fault detection in pumps, compressors, fans, and gearboxes operating in harsh plant environments.
Complete Technical Specifications
| Parameter | Specification |
|---|---|
| Part Number | 200157-06-05 |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Series / Platform | TrendMaster Pro |
| Module Type | Enveloping Accelerometer Input Module |
| Measurement Technology | Enveloping (Signal Demodulation) |
| Input Channels | 6 (per module configuration) |
| Frequency Range | High-frequency bearing band (application-dependent) |
| Signal Conditioning | Onboard bandpass filter + RMS demodulation |
| Output | 4–20 mA / Digital via TrendMaster Pro backplane |
| Power Supply | Via TrendMaster Pro rack backplane |
| Operating Temperature | 0°C to +65°C (module); sensor per datasheet |
| Enclosure / Form Factor | TrendMaster Pro plug-in module |
| Weight | Approx. 1,370 g (with packaging) |
| Compliance | CE, RoHS (per Bently Nevada platform standards) |
| Country of Origin | United States |
| HS Code | 9031.80.9090 |
Proven Application Environments
- Power Generation: Steam turbine auxiliary bearing monitoring, boiler feed pump condition tracking
- Oil & Gas: Compressor train bearing health, pipeline pump stations
- Petrochemical: Reactor agitator drives, centrifugal pump arrays
- Pulp & Paper / Mining: Fan bearing surveillance, gearbox fault detection
- General Industry: Any rotating machinery requiring early bearing defect identification
Engineering Advantages
- Enveloping Technology: Extracts impulsive bearing fault energy from high-frequency bands, providing earlier fault detection than standard RMS vibration measurements
- Distributed Architecture: Plug-in module design allows field-level signal conditioning, reducing cable runs and improving signal integrity
- Seamless Integration: Native compatibility with TrendMaster Pro racks, System 1 software, and Bently Nevada 3500 series for unified plant-wide monitoring
- Reduced Nuisance Alarms: Onboard bandpass filtering isolates bearing frequencies from process noise, improving alarm reliability
- Long Service Life: Industrial-grade components rated for continuous 24/7 operation in demanding plant environments
System Architecture & Signal Flow
The 200157-06-05 module installs directly into the TrendMaster Pro distributed I/O rack. Accelerometer sensors mounted on machinery connect to the module’s input terminals. The module applies a configurable bandpass filter to isolate the bearing defect frequency band, then performs RMS demodulation (enveloping) to produce a scalar value proportional to bearing condition severity. This conditioned signal is transmitted via the TrendMaster Pro backplane to the host processor for trending, alarming, and System 1 integration.
Signal path: Accelerometer → 200157-06-05 Module (Bandpass Filter → Demodulation → RMS) → TrendMaster Pro Backplane → System 1 / DCS / Historian
Sourcing & Quality Verification
- All units sourced from authorized distributors or verified surplus channels with documented chain of custody
- Each module inspected for physical integrity, label authenticity, and firmware/hardware revision consistency prior to shipment
- Functional testing available upon request for critical applications
- Original Bently Nevada packaging and documentation supplied where available
- Certificate of conformance (CoC) provided on request
Procurement Process
- Confirm compatibility: Verify your TrendMaster Pro rack revision and backplane slot requirements against your existing system configuration
- Request a quote: Contact us with your required quantity, delivery timeline, and any testing requirements
- Order confirmation: Purchase order accepted; lead time and shipping terms confirmed in writing
- Inspection & dispatch: Module inspected, packed to IPC/JEDEC standards, and shipped with tracking
- After-sales support: Technical assistance available for installation, configuration, and System 1 integration
Technical FAQ
Q: Is the 200157-06-05 compatible with the Bently Nevada 3500 system?
A: The 200157-06-05 is a TrendMaster Pro platform module. While both systems are Bently Nevada products, they use different rack architectures. Cross-platform integration is achieved via System 1 software, not direct hardware interchangeability.
Q: What accelerometer types are compatible with this module?
A: The module is designed for use with Bently Nevada-approved ICP/IEPE accelerometers. Consult the TrendMaster Pro system documentation for approved sensor part numbers and cable specifications.
Q: Can enveloping frequency bands be reconfigured in the field?
A: Band selection is configured via System 1 software or the TrendMaster Pro configuration interface. Hardware filter ranges are fixed per module variant; confirm the -06-05 suffix corresponds to your required frequency band before ordering.
Q: What is the typical lead time for this module?
A: In-stock units ship within 1–3 business days. For large quantities or certified-new units, contact us for availability and lead time confirmation.
Q: Do you provide installation and commissioning support?
A: Yes. Our engineering team provides remote technical support for TrendMaster Pro rack installation, module configuration, and System 1 software integration.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






