Bently Nevada 31000-00-00-00-070-03-02 Proximity Probe Housing Assembly | Replacement, Equivalent & Selection Guide
The Bently Nevada 31000-00-00-00-070-03-02 is a precision proximity probe housing assembly designed for continuous vibration and position monitoring in rotating machinery. As an authorized sourcing partner, Konmask.com supplies genuine and compatible units with full traceability for industrial automation and condition monitoring systems.
Technical Specifications
- Part Number: 31000-00-00-00-070-03-02
- Brand: Bently Nevada (Baker Hughes)
- Series: 3300 / 31000 Proximity Transducer System
- Type: Proximity Probe Housing Assembly
- Probe Length: 070 mm (active tip to connector)
- Cable Configuration: 03 (3-meter extension cable)
- Connector Type: 02 (standard BNC/coaxial)
- Operating Temperature: -35°C to +177°C
- Sensitivity: 7.87 V/mm (200 mV/mil)
- Measurement Range: 0.25 mm to 2.25 mm (10 to 90 mil)
- Supply Voltage: -24 VDC (nominal)
- Weight: Approx. 1,200 g (with cable)
- Compliance: CE, RoHS compatible
Compatible Replacement & Equivalent Models
The following models are functionally compatible or serve as direct replacements for the 31000-00-00-00-070-03-02 in most applications. Always verify gap voltage, sensitivity, and cable length before substitution.
- Bently Nevada 330101-00-06-10-02-00 — 3300 XL 8mm probe, standard replacement for 31000 series in most OEM frames
- Bently Nevada 330103-00-06-10-02-00 — 3300 XL 11mm probe, higher sensitivity variant
- Epro PR6423/010-030 — Direct equivalent, compatible with Bently Nevada 3500 monitors
- Epro PR6424/010-030 — Extended range equivalent, suitable for larger air gaps
- Emerson CSI 2140 Probe Kit — Compatible for field replacement in CSI-based monitoring systems
- Metrix ST5484E — Third-party equivalent with identical output signal (7.87 V/mm)
Note: Konmask.com can assist with cross-reference verification. Contact support@konmask.com for confirmation before ordering.
Why Choose the Original Model
- OEM Accuracy: Factory-calibrated to Bently Nevada 3300/3500 monitor specifications
- Full Traceability: Genuine units include calibration certificates and lot traceability
- System Integrity: Eliminates re-configuration of monitor gap voltage thresholds
- Warranty Compliance: Required for systems under OEM service agreements
- Long-Term Availability: Konmask.com maintains stock for legacy and current-generation systems
Typical Applications
- Steam and gas turbine shaft radial vibration monitoring
- Compressor rotor position and eccentricity measurement
- Pump and motor bearing displacement monitoring
- Gearbox and expander axial position sensing
- Petrochemical, power generation, and LNG plant machinery protection systems
System Compatibility
- Bently Nevada 3500 Series — Machinery Protection System (primary target platform)
- Bently Nevada 3300 Series — Legacy monitoring racks
- Bently Nevada 1900/65A — General-purpose vibration monitor
- Emerson AMS 6500 — ATG machinery protection
- Third-party monitors accepting -24 VDC eddy-current probe input (verify impedance matching)
Selection Guide
Use the part number structure to select the correct variant for your application:
- Probe Body Diameter: 8 mm standard (31000 series) — choose 11 mm (330103) for wider gap requirements
- Active Length (070): 70 mm — suitable for standard bearing housing installations
- Extension Cable (03): 3-meter — verify total system cable length does not exceed monitor specification (typically 5 m or 9 m total)
- Connector (02): Standard coaxial — confirm monitor input connector type before ordering
- Temperature Rating: Standard (-35°C to +177°C) — request high-temp variant for applications above 150°C continuous
If your application requires a non-standard configuration (custom cable length, armored cable, or ATEX/IECEx certification), contact Konmask.com for a custom quote.
Quality Assurance & Sourcing
- All units sourced from authorized distributors or OEM-certified supply chains
- Pre-shipment inspection: visual, dimensional, and electrical output verification
- Calibration certificate available upon request
- Packaging: anti-static, moisture-proof, with original or equivalent protective housing
- Lead time: in-stock units ship within 3–5 business days; special orders 2–4 weeks
How to Order
- Confirm part number: 31000-00-00-00-070-03-02
- Specify quantity and required delivery date
- Request calibration certificate or test report if required
- Submit inquiry to support@konmask.com or call +0086 19859288691
- Receive proforma invoice and arrange payment (T/T, PayPal, or trade terms for qualified buyers)
Replacement & Compatibility FAQ
Q: Can I replace the 31000-00-00-00-070-03-02 with a 330101 series probe?
A: In most cases yes, provided the monitor’s gap voltage and sensitivity settings are reconfigured. Consult your system integrator or contact Konmask.com for guidance.
Q: Is the Epro PR6423 a drop-in replacement?
A: The PR6423 is signal-compatible (7.87 V/mm) but may require a different mounting adapter. Verify thread size and housing dimensions before installation.
Q: Do you supply ATEX-certified versions?
A: Yes. ATEX/IECEx variants are available on request. Please specify hazardous area classification when inquiring.
Q: What is the lead time for out-of-stock units?
A: Typically 2–4 weeks for sourced units. Expedited options available — contact us for urgent requirements.
Q: Can Konmask.com provide a test report?
A: Yes. Electrical output test reports and calibration certificates are available for all units upon request.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






