BENTLY NEVADA 330101-00-08-10-02-00 Proximity Sensor | Replacement, Equivalent & Selection Guide
The Bently Nevada 330101-00-08-10-02-00 is an eddy-current proximity transducer designed for continuous, non-contact measurement of shaft vibration, position, and differential expansion in rotating machinery. It is a core component of the Bently Nevada 3300 XL 8mm proximity transducer system, widely deployed in turbines, compressors, pumps, and other critical rotating equipment.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 330101-00-08-10-02-00 |
| Brand | Bently Nevada (Baker Hughes) |
| Series | 3300 XL 8mm Proximity Transducer System |
| Sensing Technology | Eddy-Current (Non-contact) |
| Probe Tip Diameter | 8 mm |
| Cable Length | 1.0 m (extension cable sold separately) |
| Linear Range | 0.25 mm to 2.26 mm (10 mil to 90 mil) |
| Scale Factor | 7.87 V/mm (200 mV/mil) |
| Frequency Response | DC to 10,000 Hz |
| Operating Temperature | -35 to +177 degrees C |
| Power Supply | -24 VDC (via Proximitor/driver) |
| Output Voltage | -2 VDC to -18 VDC |
| Target Material | AISI 4140 steel (standard) |
| Connector | Integral coaxial cable with TNC connector |
| Approvals | CE, ATEX, FM (varies by configuration) |
Compatible Replacement & Equivalent Models
The following models are commonly evaluated as replacements or equivalents for the 330101-00-08-10-02-00. Always verify electrical and mechanical compatibility before substitution:
- Bently Nevada 330101-00-08-10-01-00 – Same probe, different connector/cable configuration
- Bently Nevada 330101-00-08-10-05-00 – Extended temperature variant
- Bently Nevada 330180-91-00 – 3300 XL 8mm system probe (alternative part numbering)
- Epro PR6423/010-030 – 8mm eddy-current probe, compatible with Epro CON021 driver; widely used as a drop-in equivalent
- Epro PR6424/010-030 – Higher-temperature variant for demanding environments
- Emerson 330101 series – OEM-equivalent under Emerson/Baker Hughes branding
Note: Third-party replacements must match scale factor (7.87 V/mm), linear range, and connector type. Always confirm with your system integrator.
Why Choose the Original Model
- Factory-calibrated accuracy – Each probe is calibrated against AISI 4140 steel targets to API 670 standards
- System-level compatibility – Designed to work seamlessly with Bently Nevada 3300 XL Proximitor drivers and System 1 software
- Proven reliability – Millions of operating hours in critical turbomachinery worldwide
- Full traceability – Serialized components with factory documentation and calibration certificates available
- OEM warranty support – Backed by Baker Hughes / Bently Nevada global service network
Typical Applications
- Steam and gas turbine shaft vibration monitoring
- Centrifugal compressor radial and axial position measurement
- Pump and motor bearing proximity sensing
- Differential expansion and eccentricity measurement
- Gear mesh frequency analysis
- API 670-compliant machinery protection systems
System Compatibility
The 330101-00-08-10-02-00 probe is designed for use within the Bently Nevada 3300 XL 8mm Proximity Transducer System, which includes:
- Proximitor Driver: 3300 XL 8mm Proximitor (e.g., 330180-X1-05)
- Extension Cable: 3300 XL extension cable (e.g., 330130-080-00-00)
- Monitoring System: Bently Nevada 3500 Series, 3300 Series, or System 1 software
- Target Material: AISI 4140 or equivalent low-alloy steel shaft
When replacing or upgrading, ensure the complete probe-cable-driver system is matched for consistent scale factor and linear range.
Selection Guide
Use the following criteria to select the correct 330101 variant for your application:
- Cable length: The “-08” segment indicates an 8-inch integral cable. Choose “-05” for 5-inch or “-10” for 10-inch as needed.
- Temperature rating: Standard models cover -35 to +177 degrees C. For higher ambient temperatures, select the extended-temperature variant.
- Connector type: The “-02-00” suffix denotes a specific connector configuration. Verify against your junction box or Proximitor input.
- Target material: Default calibration is for AISI 4140 steel. If your shaft is stainless steel or titanium, request a material-specific calibration.
- Hazardous area: Confirm ATEX/FM certification requirements for your installation zone.
Quality Assurance & Sourcing
- All units sourced through authorized distribution channels or verified surplus with full traceability
- Pre-shipment inspection includes visual check, connector integrity, and cable continuity verification
- Calibration certificates and factory documentation available upon request
- Packaging: original OEM packaging where available; otherwise anti-static protective packaging
- Lead time: typically 3 to 10 business days depending on stock availability
How to Order
- Confirm the exact part number: 330101-00-08-10-02-00
- Specify quantity required
- Indicate whether calibration certificate or factory documentation is needed
- Contact us via email at support@konmask.com
- Receive quotation within 1 business day; expedited sourcing available for urgent requirements
Replacement & Compatibility FAQ
Q: Can I use an Epro PR6423 as a direct replacement for the 330101-00-08-10-02-00?
A: In many installations, yes – both are 8mm eddy-current probes with a 7.87 V/mm scale factor. However, the Epro probe requires a compatible Epro CON021 driver, not the Bently Nevada Proximitor. A full system swap (probe + driver) is required.
Q: Is the 330101-00-08-10-02-00 compatible with the Bently Nevada 3500 monitoring system?
A: Yes, when paired with the correct 3300 XL Proximitor driver, the output signal is fully compatible with 3500 series monitors.
Q: What is the difference between 330101-00-08-10-02-00 and 330101-00-08-10-01-00?
A: The last two digit groups typically denote connector and cable termination configuration. Verify the exact pinout against your junction box before substituting.
Q: Do you supply calibration certificates?
A: Yes. Factory calibration certificates are available for new OEM units. For surplus stock, third-party calibration reports can be arranged upon request.
Q: What is the lead time for this part?
A: Standard lead time is 3 to 10 business days. Contact us for urgent or large-quantity requirements.
Copyright 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691


