Vibration Monitoring Solution – Bently Nevada 330103-00-12-05-01-CN | 3300 XL Series
The Bently Nevada 330103-00-12-05-01-CN is a high-precision eddy-current proximity transducer system engineered for continuous, non-contact measurement of shaft vibration, position, and axial thrust in critical rotating machinery. Part of the industry-standard 3300 XL Series, this transducer system delivers reliable, real-time data to protection and condition-monitoring systems in the most demanding industrial environments.
Where This Product Is Used
- Steam & Gas Turbines — Shaft radial vibration and axial position monitoring on high-speed turbine rotors in power generation plants.
- Centrifugal Compressors — Continuous proximity measurement on compressor shafts in oil & gas upstream/downstream facilities and petrochemical plants.
- Pumps & Fans — Bearing journal orbit analysis and rotor dynamic monitoring in large BFW pumps and induced-draft fans.
- Gearboxes — Gear mesh frequency and shaft displacement tracking in multi-stage industrial gearboxes.
- Marine Propulsion Systems — Shaft alignment and vibration surveillance on vessel propulsion shafts.
- Paper & Steel Mills — Roll and spindle position monitoring in continuous process lines.
Technical Specifications
- Part Number: 330103-00-12-05-01-CN
- Series: Bently Nevada 3300 XL Proximity Transducer System
- Probe Cable Length: 5 m (extension cable)
- Probe Tip Diameter: 8 mm
- Measurement Range: 0.25 mm – 2.54 mm (linear range)
- Sensitivity: 7.87 V/mm (200 mV/mil)
- Frequency Response: 0 – 10,000 Hz
- Supply Voltage: –24 VDC (nominal)
- Output: –1 VDC to –21 VDC (proportional to gap)
- Operating Temperature: –35°C to +121°C (probe); –35°C to +66°C (driver)
- Target Material: AISI 4140 steel or equivalent (non-magnetic, conductive)
- Connector: Standard BNC / integral cable
- Approvals: CE, ATEX (consult datasheet for zone classification)
- Weight: ~40 g (probe assembly)
Why Engineers Specify This Model
- Proven 3300 XL Platform — Drop-in compatible with existing Bently Nevada 3300 series monitors (3300/16, 3300/20, 3500 rack) without recalibration.
- High Linearity — ±0.5% full-scale linearity ensures accurate shaft position data for API 670-compliant protection systems.
- Robust Construction — Stainless-steel probe body with hermetically sealed tip withstands high-pressure lube oil environments and steam ingress.
- Long Cable Runs — Matched extension cable maintains system sensitivity over distances up to 9 m without signal degradation.
- Factory Calibrated — Each system is calibrated as a matched set (probe + extension + driver) for guaranteed interchangeability.
- CN Suffix Compliance — Manufactured and certified for the Chinese market; meets GB/T and SH/T standards applicable to domestic petrochemical installations.
Complete System Bill of Materials
- 330103-00-12-05-01-CN — Proximity probe + 5 m extension cable + driver (matched set)
- 330130-080-00-00 — Proximitor® sensor / signal conditioner (sold separately)
- 330180-X1-05 — Armored extension cable, 5 m (optional upgrade)
- 02-262066-01 — Mounting bracket, standard flange (sold separately)
- Bently Nevada 3500/42M — Proximitor®/Seismic monitor module (rack-mount, sold separately)
Compliance & Industry Standards
- API 670 — 5th Edition: Machinery Protection Systems (radial vibration, axial position)
- ISO 10816 / ISO 20816 — Mechanical vibration evaluation of machines
- IEC 61511 — Functional safety for SIS applications (consult system integrator)
- GB/T 13823 — Chinese national standard for vibration transducers
- ATEX / IECEx — Hazardous area certification (verify zone with datasheet)
- CE Marking — EMC Directive 2014/30/EU
Quality Assurance & Sourcing
All Bently Nevada components supplied by Konmask.com are sourced through verified industrial distribution channels. Each unit undergoes incoming inspection including:
- Visual and dimensional check against OEM datasheet
- Sensitivity verification (mV/mil output test)
- Continuity and insulation resistance test on cable assembly
- Serialization cross-check against manufacturer records where available
We supply new, surplus-new, and reconditioned units clearly labeled by condition. Certificates of conformance (CoC) and test reports are available upon request.
How to Source This Part
- In-Stock Orders: Submit your RFQ via support@konmask.com or call +0086 19859288691 for same-day quotation.
- Lead Time: In-stock units ship within 1–3 business days; sourced units typically 7–21 days.
- MOQ: 1 piece (no minimum order quantity).
- Export: We handle export documentation, HS code classification (8543.70), and customs declarations for international shipments.
- OEM Cross-Reference: Compatible with all standard 3300 XL system configurations; confirm target material and gap range before ordering.
Application-Specific FAQ
Q: Is the 330103-00-12-05-01-CN compatible with the Bently Nevada 3500 rack?
A: Yes. The 3300 XL probe system is fully compatible with the 3500/42M Proximitor®/Seismic monitor when used with the appropriate Proximitor® sensor (330130 series).
Q: What is the difference between the -01-CN and standard -01-00 suffix?
A: The -CN suffix denotes a variant certified and documented for the Chinese domestic market, meeting applicable GB/T standards. Electrically and mechanically identical to the -00 variant.
Q: Can this transducer be used on non-ferrous shafts?
A: The standard calibration targets AISI 4140 steel. Non-ferrous or non-magnetic targets (e.g., titanium, Inconel) require a custom calibration curve — contact us for details.
Q: What is the maximum shaft speed this system can monitor?
A: The 3300 XL system supports frequency response up to 10,000 Hz, making it suitable for machinery operating up to 600,000 RPM in specialized applications.
Q: Do you provide installation and commissioning support?
A: We provide technical documentation, wiring diagrams, and remote commissioning guidance. On-site support can be arranged through our partner network.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






