Bently Nevada 330103-00-09-05-01-CN – 8mm Proximity Transducer System | 3300 XL Series Platform
The Bently Nevada 330103-00-09-05-01-CN is a precision 8mm eddy-current proximity transducer system engineered for continuous, non-contact measurement of shaft radial vibration, axial position, and differential expansion in rotating machinery. Designed as a core sensing element within the Bently Nevada 3300 XL Series condition monitoring platform, this transducer system delivers the signal fidelity and long-term stability demanded by power generation, petrochemical, and heavy industrial applications.
Procurement engineers sourcing replacement or expansion components for existing 3300 XL installations will find this part a direct, specification-matched solution — eliminating compatibility risk and reducing commissioning time.
Complete Technical Specifications
| Part Number | 330103-00-09-05-01-CN |
| Brand / OEM | Bently Nevada (Baker Hughes) |
| Series / Platform | 3300 XL Proximity Transducer System |
| Transducer Type | Eddy-Current (Non-Contact) |
| Probe Tip Diameter | 8 mm |
| Measurement Range | 0.25 mm – 2.25 mm (10 mil – 90 mil) |
| Scale Factor | 7.87 V/mm (200 mV/mil) |
| Frequency Response | DC – 10,000 Hz (–3 dB) |
| Supply Voltage | –24 VDC (nominal) |
| Output Signal | –2 VDC to –18 VDC (linear range) |
| Cable Length | 9 m (extension cable included) |
| Extension Cable | 5 m standard armored coaxial |
| Target Material | AISI 4140 steel (or equivalent ferromagnetic) |
| Operating Temperature | –35°C to +177°C (probe); –35°C to +85°C (driver) |
| Ingress Protection | IP67 (probe assembly) |
| Connector Type | MIL-C-5015 (standard Bently Nevada) |
| Compliance | API 670, CE, RoHS |
| Weight | ~40 g (probe only) |
| Country of Origin | USA / CN variant |
Proven Application Environments
- Steam & Gas Turbines – Shaft radial vibration and thrust position monitoring per API 670
- Centrifugal Compressors – Real-time rotor dynamic measurement in high-speed trains
- Pumps & Fans – Continuous bearing health monitoring in critical service
- Gearboxes – Gear mesh frequency analysis and shaft orbit measurement
- Electric Motors (>500 kW) – Rotor eccentricity and air-gap monitoring
- Hydro Turbines – Axial thrust and guide bearing displacement tracking
Engineering Advantages
- Non-contact measurement eliminates mechanical wear and enables indefinite service life under normal operating conditions
- DC response captures both static position (gap) and dynamic vibration in a single output channel
- 3300 XL system compatibility ensures plug-and-play integration with existing Bently Nevada monitors (3300/16, 3300/20, 3500 series via adapter)
- Armored coaxial cable provides EMI shielding in high-noise industrial environments
- Wide temperature range supports installation in hot-section turbine pedestals without derating
- API 670 compliance satisfies machinery protection requirements for critical and essential service classifications
System Architecture & Signal Flow
The 330103-00-09-05-01-CN operates as a three-component system:
- Probe (330103-00-09-05-01-CN) – Generates a high-frequency electromagnetic field; eddy-current losses in the target surface modulate the oscillator circuit.
- Extension Cable (330130-xx-xx) – Transmits the modulated RF signal from probe to driver with minimal loss; cable length is calibrated and must match the driver’s compensation curve.
- Proximitor® Driver / Oscillator-Demodulator – Converts the RF signal to a DC-proportional voltage output; interfaces directly with 3300/3500 series monitor inputs.
Output polarity: negative voltage increases as gap decreases (probe approaches target). Signal is directly compatible with Bently Nevada 3300 XL monitor channel inputs without additional signal conditioning.
Sourcing & Quality Verification
- Units sourced from authorized distribution channels and verified OEM surplus inventory
- Each unit undergoes functional verification: gap-voltage linearity check across full measurement range
- Serialization and date codes inspected; counterfeit-risk screening applied
- Packaging inspected for OEM integrity; re-packaged units clearly identified
- Certificate of conformance (CoC) available upon request for critical service applications
Procurement Process
- Confirm compatibility – Verify your existing extension cable length and Proximitor driver model match the 9 m / 5 m system configuration
- Request a quote – Contact support@konmask.com for volume pricing, lead time, and CoC availability
- Place order – Standard payment terms; HKD pricing with multi-currency support at checkout
- Shipping – EXW Shenzhen; DHL / FedEx express available; export documentation provided
- Technical support – Pre- and post-sale engineering support available via email or phone
Technical FAQ
Q: Is the 330103-00-09-05-01-CN compatible with the Bently Nevada 3500 series monitors?
A: Direct compatibility requires a 3500/42M or equivalent input module. The signal levels and connector types differ; consult your 3500 system documentation or contact us for adapter options.
Q: Can this transducer measure non-ferromagnetic targets (e.g., titanium, aluminum)?
A: Yes, but the scale factor will differ from the standard 7.87 V/mm. Bently Nevada provides target material correction factors; recalibration of the monitor channel is required.
Q: What is the maximum shaft surface speed for reliable measurement?
A: The 3300 XL system is rated for shaft surface speeds up to 200 m/s under standard installation conditions.
Q: How do I verify the probe is functioning correctly on-site?
A: Use a Bently Nevada TK-3 or equivalent calibration tool to verify the gap-voltage curve. A healthy probe will produce a linear output within ±1% of the nominal scale factor across the measurement range.
Q: Is a Certificate of Conformance included?
A: CoC is available upon request at no additional charge. Please specify at time of order.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






