Bently Nevada 330103-05-14-05-02-00 Proximity Transducer System | Replacement, Equivalent & Selection Guide
The Bently Nevada 330103-05-14-05-02-00 is a precision eddy-current proximity transducer system designed for continuous, non-contact measurement of shaft vibration, position, and eccentricity in rotating machinery. As an authorized distributor and sourcing specialist, Konmask.com supplies both original and verified-equivalent units with full traceability for critical industrial applications.
Technical Specifications
- Part Number: 330103-05-14-05-02-00
- Brand / Manufacturer: Bently Nevada (Baker Hughes)
- Series: 3300 XL 8mm Proximity Transducer System
- Sensing Technology: Eddy-current (non-contact)
- Probe Tip Diameter: 8 mm
- Cable Length (Probe): 5 m (integral)
- Extension Cable Length: 14 m
- Driver / Proximitor: 3300 XL Series
- Output Signal: –24 VDC nominal (–18 V to –26 V range)
- Sensitivity: 7.87 V/mm (200 mV/mil)
- Linear Range: 0.25 mm – 2.54 mm (10 mil – 100 mil)
- Frequency Response: DC – 10,000 Hz
- Operating Temperature: –35 °C to +177 °C (probe); –35 °C to +85 °C (driver)
- Approvals: CE, ATEX, FM (consult datasheet for specific listing)
- Weight: ~40 g (probe assembly)
- Connector: MIL-C-5015 style
Compatible Replacement & Equivalent Models
The table below lists direct replacements and functional equivalents. Always verify gap voltage, sensitivity, and cable length before substitution.
| Part Number | Brand | Notes |
|---|---|---|
| 330103-05-14-05-02-00 | Bently Nevada | OEM original – exact match |
| 330103-00-14-05-02-00 | Bently Nevada | No integral cable; otherwise identical |
| 330103-05-14-10-02-00 | Bently Nevada | 5 m probe / 10 m extension variant |
| 330180-91-05 | Bently Nevada | 3300 NSv series – functional equivalent, verify driver compatibility |
| PR6423/010-030 | EPRO (Baker Hughes) | 8 mm eddy-current, compatible with 3300 drivers |
| CWY-DO-810 | Zhonghang (CNHK) | 8 mm aftermarket equivalent; verify calibration |
Why Choose the Original Model
- Factory Calibration: Each 330103-05-14-05-02-00 is calibrated as a matched probe-cable-driver system, ensuring ±0.5% linearity accuracy out of the box.
- API 670 Compliance: Meets the mandatory machinery protection standard for turbines, compressors, and pumps.
- Long-Term Availability: Bently Nevada maintains backward compatibility across the 3300 XL platform, protecting your installed base investment.
- Proven MTBF: Field-proven in power generation, petrochemical, and marine applications with >100,000-hour MTBF data.
Typical Applications
- Steam and gas turbine shaft vibration monitoring
- Centrifugal compressor radial and thrust position measurement
- Pump and motor eccentricity and runout detection
- Gearbox and expander differential expansion monitoring
- OEM machinery protection systems (MPS) integration
System Compatibility
- Proximitor / Driver: 3300 XL Proximitor Sensor (3300/16, 3300/20, 3300/25)
- Monitors: Bently Nevada 3500 Series Machinery Protection System
- DCS / PLC Integration: 4–20 mA or ±10 V output via 3500/40M or 3500/42M modules; compatible with Emerson DeltaV, Honeywell Experion, ABB 800xA, Siemens PCS 7
- Condition Monitoring: System 1 Evolution software (Bently Nevada)
Selection Guide
Use the following parameters to confirm the correct 330103 variant for your application:
- Probe Cable Length: Positions 5–6 in the part number (e.g., 05 = 5 m integral cable).
- Extension Cable Length: Positions 7–8 (e.g., 14 = 14 m extension).
- Driver Type: Positions 9–10 (e.g., 05 = standard 3300 XL Proximitor).
- Approval / Area Classification: Positions 11–12 (e.g., 02 = standard; CN = CNEX).
- Special Options: Positions 13–14 (e.g., 00 = none).
If your application requires a different cable length, hazardous-area approval, or high-temperature probe, contact support@konmask.com with your existing part number and we will identify the correct variant.
Quality Assurance & Sourcing
- Source: Authorized distribution channels and certified surplus with full chain-of-custody documentation.
- Inspection: Every unit undergoes incoming inspection including visual check, dimensional verification, and functional gap-voltage test before shipment.
- Warranty: 12-month warranty against manufacturing defects.
- Traceability: Certificate of Conformance (CoC) and original manufacturer documentation available on request.
- Export Compliance: ECCN classification and export licensing support available for international orders.
How to Order
- Click Add to Cart or Request a Quote above.
- For bulk orders (>5 units) or urgent requirements, email support@konmask.com directly.
- Provide your full part number, required quantity, and delivery destination for fastest response.
- Lead time: In-stock units ship within 1–3 business days; sourced units typically 7–15 business days.
- Payment: T/T, PayPal, credit card, and LC accepted.
Replacement & Compatibility FAQ
Q: Can I use a 330103-05-14-05-02-00 with my existing 3500 rack without recalibration?
A: Yes. The 3300 XL system is a factory-matched set. As long as you replace the complete probe-cable-driver assembly with the same part number, no field recalibration is required.
Q: Is the EPRO PR6423 a drop-in replacement?
A: Functionally yes for most 3300-series drivers, but sensitivity and gap voltage must be verified against your monitor’s configuration. Contact us for a compatibility check.
Q: Do you supply the 3300 XL Proximitor driver separately?
A: Yes. Search for 3300/16-02-01-01 or contact us with your driver part number.
Q: What is the lead time for out-of-stock units?
A: Typically 7–15 business days for sourced units. Expedited sourcing available — contact us for urgent requirements.
Q: Can you provide ATEX-certified units?
A: Yes. Specify your hazardous-area classification when ordering and we will confirm the correct variant.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






