Bently Nevada 330104-00-13-90-02-00 Proximity Transducer System | Replacement, Equivalent & Selection Guide
The Bently Nevada 330104-00-13-90-02-00 is a high-precision eddy-current proximity transducer system designed for continuous vibration and position monitoring of rotating machinery. As an authorized distributor and sourcing specialist, Konmask.com supplies both original units and verified compatible equivalents to keep your plant running without interruption.
Technical Specifications
- Part Number: 330104-00-13-90-02-00
- Brand: Bently Nevada (Baker Hughes)
- Series: 3300 XL 8 mm Proximity Transducer System
- Sensing Technology: Eddy-current (non-contact)
- Probe Tip Diameter: 8 mm
- Cable Length: 1.0 m (extension cable)
- Linear Range: 0–2.0 mm (0–80 mil)
- Scale Factor: 7.87 V/mm (200 mV/mil)
- Frequency Response: DC to 10,000 Hz
- Operating Temperature: −35 °C to +121 °C
- Output Voltage: −18 VDC (nominal, at mid-range)
- Power Supply: −24 VDC (−20 to −26 VDC)
- Target Material: AISI 4140 steel (or equivalent)
- Approvals: CE, ATEX, FM (refer to datasheet for full listing)
- Weight: ~80 g
Compatible Replacement & Equivalent Models
The following models are functionally compatible with the 330104-00-13-90-02-00 and can serve as drop-in or near-drop-in replacements in most installations. Always verify gap voltage, scale factor, and connector type before substitution.
| Model | Brand | Compatibility Notes |
|---|---|---|
| 330104-00-13-10-02-00 | Bently Nevada | Same series, shorter extension cable (0.5 m) |
| 330104-00-13-05-02-00 | Bently Nevada | Same series, 5 m cable variant |
| 330104-00-13-90-02-CN | Bently Nevada | China-market variant, identical specs |
| CS-1 / CS-3 Series | Metrix (Roper Technologies) | 8 mm eddy-current, compatible scale factor; verify connector |
| PR6423 Series | EPRO (Baker Hughes) | 8 mm, same output standard; widely used as OEM replacement |
| TQ Series 8 mm | Shinkawa | Compatible in many API 670 installations; verify gap setting |
Why Choose the Original Model
- API 670 Compliance: Factory-certified to meet API 670 machinery protection standards.
- Proven Reliability: Decades of field deployment in turbines, compressors, and pumps worldwide.
- System Integrity: Matched probe–extension–driver sets ensure calibrated scale factor and minimal signal error.
- OEM Warranty: Backed by Bently Nevada / Baker Hughes global support network.
- Traceability: Full material traceability and factory calibration certificates available.
Typical Applications
- Steam and gas turbine shaft vibration monitoring
- Centrifugal compressor radial and axial position measurement
- Pump and motor bearing displacement monitoring
- Gearbox and expander machinery protection systems
- API 670-compliant continuous monitoring panels
System Compatibility
The 330104-00-13-90-02-00 probe is designed to operate as part of the Bently Nevada 3300 XL System, compatible with the following monitors and drivers:
- Bently Nevada 3300 XL 11 mm Driver (330180 series)
- Bently Nevada 3500/42M Proximitor I/O Module
- Bently Nevada 3500/40M Proximitor I/O Module
- System 1 Condition Monitoring Software (data acquisition)
- Third-party DCS/PLC inputs accepting −24 VDC powered eddy-current signals (4–20 mA or voltage output via signal conditioner)
Selection Guide
Use the table below to select the correct 330104 variant for your installation:
| Parameter | Options | Code Position |
|---|---|---|
| Probe Tip Diameter | 8 mm | 330104 |
| Extension Cable Length | 0.5 m / 1.0 m / 5.0 m / 9.0 m | Positions 4–5 |
| Target Material | Steel (02) / Non-ferrous (03) | Position 6 |
| Connector Type | Standard (00) / Armored (01) | Position 7 |
| Approval | Standard / ATEX / FM | Position 8 |
Not sure which variant fits your system? Contact our engineers at support@konmask.com for a free selection consultation.
Quality Assurance & Sourcing
- Source: Authorized distributor channels and certified surplus with full traceability.
- Inspection: Every unit undergoes visual inspection and functional verification before shipment.
- Documentation: Factory calibration certificates, material certificates, and test reports available on request.
- Packaging: Original OEM packaging preserved where possible; anti-static and moisture-proof packaging for all units.
- Lead Time: In-stock units ship within 1–3 business days; sourced units typically 5–15 business days.
How to Order
- Confirm your part number: 330104-00-13-90-02-00
- Specify quantity and required delivery date.
- Request a quote via support@konmask.com or call +0086 19859288691.
- Receive proforma invoice and arrange payment (T/T, PayPal, or credit card).
- Shipment with tracking number provided within agreed lead time.
Replacement & Compatibility FAQ
Q: Can I use a 330104-00-13-90-02-00 to replace an older 330104-00-13-05-02-00?
A: Yes, provided the extension cable length difference is accommodated. The 9.0 m variant (90) vs 5.0 m (05) requires cable routing adjustment.
Q: Is the EPRO PR6423 a direct drop-in replacement?
A: Functionally compatible in most cases, but connector and mounting thread must be verified. Contact us for a detailed compatibility check.
Q: Do you supply calibration certificates with each unit?
A: Yes. Factory calibration certificates are included with all new OEM units. Certificates for surplus units are available upon request.
Q: What is the warranty on units purchased from Konmask.com?
A: All units carry a minimum 12-month warranty against manufacturing defects. Extended warranty options are available.
Q: Can you source discontinued or obsolete variants?
A: Yes. Our global sourcing network specializes in hard-to-find and obsolete Bently Nevada parts. Submit your part number for a sourcing inquiry.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






