Bently Nevada 330103-05-17-10-02-00 – Non-Contact Eddy-Current Proximity Transducer | 3300 XL Proximity Transducer System
Engineering Background: The 3300 XL Proximity Transducer System is Bently Nevada’s (Baker Hughes) flagship eddy-current sensing platform, engineered to API 670 machinery protection standards. It is the de facto industry standard for continuous, non-contact shaft vibration and position measurement in critical rotating equipment across power generation, oil & gas, and petrochemical industries.
Product Positioning: The 330103-05-17-10-02-00 is a specific configuration within the 330103 probe series, featuring a 5 m extension cable, a 17 mm probe body, 10-32 UNF thread, and standard 02 coaxial connector. This configuration is optimized for deep-bore bearing housing installations where standard 12 mm probes cannot reach target depth. Konmask.com supplies only genuine, traceable units with full documentation support.
Complete Technical Specifications
- Part Number / SKU: 330103-05-17-10-02-00
- Brand: Bently Nevada (Baker Hughes)
- Series / Platform: 3300 XL Proximity Transducer System
- Sensing Technology: Eddy-current (non-contact)
- Extension Cable Length: 5 m
- Probe Body Length: 17 mm
- Thread Size: 10-32 UNF
- Connector Type: 02 (standard coaxial)
- Output Signal: −18 VDC nominal (with matched driver)
- Measurement Range: 0.25 mm – 2.25 mm (linear range)
- Sensitivity: 7.87 V/mm (200 mV/mil)
- Supply Voltage: −24 VDC (±1 VDC)
- Operating Temperature – Probe: −35°C to +177°C
- Operating Temperature – Driver/Extension: −35°C to +85°C
- Probe Tip Diameter: 8 mm nominal
- Target Material: AISI 4140 steel or equivalent ferromagnetic alloy
- Weight: Approx. 40 g
- HS Code: 9031.80.90
- Compliance: CE, RoHS, API 670, ISO 10816, ISO 7919
Proven Application Environments
- Steam turbine and gas turbine shaft radial vibration monitoring
- Centrifugal compressor radial and axial position measurement
- Pump and motor bearing displacement monitoring in deep-bore housings
- Gearbox and expander machinery protection systems
- Hydroelectric generator shaft position and eccentricity measurement
- Petrochemical, LNG, power generation, and offshore platform installations
Engineering Advantages
- ✅ 17 mm probe body — engineered for deep-bore and heavy-wall bearing housings where standard 12 mm probes cannot reach target depth
- ✅ Non-contact measurement — zero mechanical wear; suitable for continuous 24/7 operation without maintenance intervals
- ✅ High linearity and repeatability — 7.87 V/mm sensitivity maintained across the full measurement range
- ✅ API 670 compliant — meets international machinery protection standards for critical rotating equipment
- ✅ Wide temperature tolerance — probe rated to +177°C for high-temperature bearing environments
- ✅ Direct system compatibility — plug-and-play replacement within existing 3300 XL installations; no monitor recalibration required when matched driver is used
- ✅ Genuine OEM unit — not a clone, equivalent, or refurbished-as-new component
System Architecture & Signal Flow
The 330103-05-17-10-02-00 operates as part of a three-component eddy-current measurement chain:
- Probe (330103 series): Generates a high-frequency electromagnetic field at the probe tip. Eddy currents induced in the target shaft surface create a measurable impedance change proportional to gap distance.
- Extension Cable (330130 series): Transmits the RF signal between probe and driver. Total system cable length (probe + extension) must match driver calibration. This unit includes a 5 m extension cable — verify driver calibration matches total cable length.
- Driver / Oscillator-Demodulator (3300 XL series): Converts the impedance signal to a DC voltage output (nominally −18 VDC at mid-range). Compatible with Bently Nevada 3300 XL 8 mm driver modules.
- Monitor (3500 Series): Receives the DC voltage signal, applies alarm and danger setpoints, and outputs to DCS/SCADA via 4–20 mA, MODBUS, or PROFIBUS.
⚠ Note: Always verify total system cable length matches driver calibration range. Mismatched cable lengths will result in sensitivity and zero-position errors.
Sourcing & Quality Verification
Every unit shipped from Konmask.com undergoes a 4-step internal verification protocol:
- Step 1 – Source Authentication: Units sourced exclusively from authorized Bently Nevada distributors or Baker Hughes-certified supply chains. Counterfeit-risk screening applied at intake.
- Step 2 – Physical Inspection: Serial number, label integrity, connector condition, cable jacket, and probe tip inspected against OEM reference standards.
- Step 3 – Functional Bench Test: Where applicable, output linearity and sensitivity verified using calibrated test equipment.
- Step 4 – Documentation Review: Traceability documentation (CoC, datasheet, packing records) compiled and available upon request.
- 🌍 Ships worldwide from Hong Kong and mainland China fulfillment hubs
- 📦 Export packaging with anti-static protection and moisture barrier
- 🚀 Express options: DHL, FedEx, UPS — typical transit 3–7 business days internationally
- 📋 Export documentation: Commercial invoice, packing list, CoO, CoC available
- 🔒 HS Code 9031.80.90 declared accurately per destination customs requirements
Procurement Process
- Add to Cart — Proceed directly via the purchase button above.
- Request a Quote — For bulk orders (5+ units) or full BOM sourcing, email [email protected] for volume pricing.
- Confirm Lead Time — In-stock units ship within 1–2 business days. Out-of-stock: contact us for ETA and alternative configurations.
- Payment — T/T wire transfer, PayPal, and major credit cards via Shopify Payments accepted.
- Tracking — Tracking number emailed upon dispatch. Real-time updates via carrier portal.
Technical FAQ
Q: What is the difference between 330103-05-12-10-02-00 and 330103-05-17-10-02-00?
A: The only difference is probe body length: 12 mm vs. 17 mm. The 17 mm variant is required for deep-bore bearing housings where the probe tip must extend further to reach the target shaft surface. All other electrical specifications are identical.
Q: Can I use this probe with my existing 3300 XL driver?
A: Yes, provided the driver is calibrated for the total system cable length (probe + extension). Verify your driver calibration range before installation. Contact us if you need the matching driver module.
Q: Is this unit API 670 compliant?
A: Yes. The 3300 XL system is designed and manufactured to API 670 (5th Edition) machinery protection standards.
Q: Do you offer a warranty?
A: Yes — 12-month warranty against manufacturing defects. DOA units replaced or refunded within 30 days of receipt.
Q: Can you source other 330103 series configurations?
A: Yes. The 330103 series covers multiple probe lengths, cable lengths, and connector types. Email your exact part number and we will confirm availability or source the correct configuration.
Q: Is this product export-controlled?
A: Bently Nevada proximity transducers are generally EAR99 / non-ECCN controlled. Buyers are responsible for compliance with local import regulations.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: [email protected] | +0086 19859288691
