Rotating Machinery Condition Monitoring Solution — VIBRO METER UVC752 | 204-752-000-014S Series
Where This Product Is Used
The VIBRO METER UVC752 Vibration Processor Module is purpose-built for continuous, real-time vibration monitoring of rotating machinery in mission-critical industrial environments. Engineers and reliability teams deploy this module across the following applications:
- Gas & Steam Turbines — Shaft vibration monitoring per API 670 in power generation plants and combined-cycle facilities
- Centrifugal Compressors — Radial and axial vibration processing in oil & gas upstream/downstream compression trains
- Large Pumps & Fans — Bearing housing vibration acquisition in petrochemical and water treatment plants
- Marine Propulsion Systems — Shaft line monitoring on vessels requiring DNV or Lloyd’s Register compliance
- Nuclear & Thermal Power Plants — Safety-instrumented vibration channels where IEC 61511 functional safety applies
- Paper & Steel Mills — Roll and drive train vibration acquisition in continuous process lines
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 204-752-000-014S |
| Series | UVC752 |
| Manufacturer | VIBRO METER (Meggitt SA) |
| Module Type | Vibration Processor / Signal Conditioning Module |
| Input Channels | Multi-channel vibration signal input (eddy-current / velocity / accelerometer compatible) |
| Output | Analog 4–20 mA / voltage outputs; relay alarm outputs |
| Communication | Compatible with VM600 rack-based monitoring system |
| Measurement Parameters | RMS, Peak, Peak-to-Peak, Gap/DC, Phase |
| Alarm Levels | Configurable Alert and Danger thresholds |
| Power Supply | Supplied via VM600 rack backplane |
| Operating Temperature | 0 °C to +60 °C |
| Weight | Approx. 500 g |
| Form Factor | Plug-in card module for VM600 chassis |
Note: Full datasheet available upon request. Contact support@konmask.com for OEM documentation.
Why Engineers Specify This Model
- API 670 Compliance Ready — Meets the signal processing requirements for machinery protection systems as defined by API Standard 670 (5th Edition)
- High Signal Fidelity — Dedicated analog front-end minimizes noise floor, critical for detecting early-stage bearing defects and rotor imbalance
- Seamless VM600 Integration — Plug-and-play compatibility with the VIBRO METER VM600 rack system eliminates custom wiring and reduces commissioning time
- Configurable Alarm Architecture — Independent Alert and Danger relay outputs allow integration with DCS/PLC safety shutdown logic without additional signal conditioning
- Proven Field Reliability — Meggitt/VIBRO METER modules are installed in thousands of turbomachinery protection systems globally, with documented MTBF exceeding 10 years in continuous service
- Multi-Parameter Processing — Single module handles RMS, Peak, Gap, and Phase simultaneously, reducing rack slot count and system cost
Complete System Bill of Materials
The UVC752 operates as part of the VM600 machinery monitoring platform. A typical turbomachinery protection channel includes:
- VM600 Rack Chassis (e.g., VM600 MPC4 or RPS6U)
- UVC752 Vibration Processor Module (this item — 204-752-000-014S)
- Eddy-Current Proximity Probe (e.g., PR6423 series)
- Extension Cable (matched impedance, field-selectable length)
- Driver/Oscillator (e.g., CON021 or integrated driver)
- I/O Terminal Board (rack-specific, field-wiring interface)
- VM600 Configuration Software (VibroSight or legacy VMConfig)
Contact Konmask for complete BOM quotations and system integration support.
Compliance & Industry Standards
- API 670 — Machinery Protection Systems (5th Edition)
- ISO 10816 / ISO 20816 — Mechanical vibration evaluation of machines
- IEC 61511 — Functional Safety for Safety Instrumented Systems (SIS)
- DNV GL / Lloyd’s Register — Marine type approval (system-level, verify with OEM certificate)
- CE Marking — EMC Directive compliance for European installations
- RoHS — Restriction of Hazardous Substances compliant
Quality Assurance & Sourcing
Konmask.com sources VIBRO METER modules through verified industrial automation supply channels. Every unit offered is:
- Inspected for physical integrity and label authenticity prior to dispatch
- Stored in ESD-safe, climate-controlled warehousing
- Shipped with original manufacturer packaging where available
- Traceable by serial number for warranty and service history
- Backed by Konmask’s 90-day return-to-base warranty on verified genuine parts
We do not sell counterfeit, refurbished-as-new, or unverified grey-market inventory. If provenance documentation is required for your procurement process, request a Certificate of Conformance (CoC) at the time of order.
How to Source This Part
- Add to Cart — Click “Add to Cart” above and proceed to checkout for standard lead-time stock
- Request a Quote — For volume orders (>3 units), OEM pricing, or project BOM quotations, email support@konmask.com
- Expedite Inquiry — For urgent plant shutdowns or turnaround projects, call +0086 19859288691 for same-day response
- Technical Pre-Sales — Not sure if this module matches your rack configuration? Send your existing system model number and we will confirm compatibility before you order
Application-Specific FAQ
Q: Is the UVC752 compatible with both eddy-current and velocity sensor inputs?
A: The UVC752 is primarily designed for eddy-current (proximity probe) inputs within the VM600 system. For velocity or accelerometer inputs, VIBRO METER offers dedicated modules (e.g., IOC4T). Contact us to confirm the correct module for your sensor type.
Q: Can this module be used as a standalone unit outside the VM600 rack?
A: No. The UVC752 requires the VM600 rack backplane for power and communication. It is not a standalone instrument.
Q: Does the module support Modbus or PROFIBUS communication?
A: Communication protocol support depends on the VM600 rack’s communication card (e.g., MPC4 with optional fieldbus gateway). The UVC752 itself outputs analog signals and relay contacts; digital fieldbus integration is handled at the rack level.
Q: What is the lead time for this part number?
A: In-stock units ship within 3–5 business days. Out-of-stock items typically have a 4–8 week lead time depending on OEM availability. Contact us for real-time stock status.
Q: Can Konmask provide installation and commissioning support?
A: Konmask specializes in parts supply. For on-site commissioning, we can refer you to certified VIBRO METER service partners in your region.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
