Bently Nevada 330103-09-19-05-02-00 Shaft Proximity Transducer System – 3300 XL Series
When a critical rotating machine loses its shaft vibration monitoring capability, the consequences are immediate and severe: undetected rotor imbalance, bearing wear, or shaft misalignment can escalate within minutes into catastrophic machinery failure, unplanned downtime, and six-figure repair costs. In high-stakes environments — power generation turbines, compressor trains, refinery pumps — the absence of a reliable proximity transducer system is not a maintenance gap; it is an operational liability.
The Bently Nevada 330103-09-19-05-02-00 is a precision-engineered proximity transducer system within the globally trusted 3300 XL Series — Bently Nevada’s flagship eddy-current sensing platform. Designed to deliver continuous, non-contact measurement of shaft radial vibration, axial position, and differential expansion, this system is the industry benchmark for rotating machinery protection in power plants, petrochemical facilities, and heavy industrial operations worldwide. Its 5-meter extension cable configuration and 8mm probe diameter make it the preferred choice for installations requiring extended reach with uncompromised signal integrity.
Technical Specifications
- Part Number: 330103-09-19-05-02-00
- Series: Bently Nevada 3300 XL Proximity Transducer System
- Probe Diameter: 8 mm
- Probe Length: 9 mm (nose length)
- Cable Length (Probe): 0.5 m integral cable
- Extension Cable Length: 5 m
- Driver/Proximitor: 3300 XL 8mm Proximitor® Sensor
- Measurement Type: Eddy-current, non-contact
- Output Signal: -24 VDC nominal (standard Bently Nevada output)
- Frequency Range: DC to 10,000 Hz
- Operating Temperature: -35°C to +121°C (probe); -35°C to +66°C (Proximitor)
- Target Material: AISI 4140 steel or equivalent
- Agency Approvals: CE, FM, CSA (refer to product documentation)
- Weight: Approx. 40 g (probe assembly)
Key Features & Benefits
- Non-Contact Measurement: Eliminates mechanical wear on the sensor, ensuring long service life in continuous 24/7 monitoring applications.
- High Signal Fidelity: The 3300 XL eddy-current technology delivers a linear, low-noise output across the full operating frequency range — critical for accurate vibration analysis.
- 5-Meter Extension Cable: Provides installation flexibility for machinery where the Proximitor must be mounted away from the probe location, reducing signal degradation risk.
- Wide Temperature Tolerance: Rated for extreme industrial environments including steam turbine bearing housings and outdoor compressor stations.
- Direct Compatibility: Plug-and-play integration with Bently Nevada 3500 Series machinery protection systems and System 1 condition monitoring software.
- Proven Global Reliability: Deployed in thousands of critical rotating machinery installations across six continents.
Industry & Equipment Applications
- Power Generation: Steam turbines, gas turbines, hydro generators — shaft radial vibration and axial position monitoring.
- Oil & Gas: Centrifugal compressors, pipeline pumps, gas turbine-driven compressor trains.
- Petrochemical & Refining: Process compressors, reactor agitators, boiler feed pumps.
- Pulp & Paper / Steel: Large induction motors, gearboxes, rolling mill drives.
- Marine & Offshore: Propulsion turbines, auxiliary machinery on FPSOs and offshore platforms.
System Integration & Compatible Parts
The 330103-09-19-05-02-00 is designed for seamless integration within the Bently Nevada 3300 XL and 3500 Series ecosystems. Compatible and commonly paired components include:
- Bently Nevada 3300 XL 8mm Proximitor® Sensor (330180-X1-CN)
- Bently Nevada 3500/42M Proximitor®/Seismic Monitor Module
- Bently Nevada 3500/22M Transient Data Interface
- Bently Nevada System 1 Software (condition monitoring platform)
- Bently Nevada 330130 Series extension cables (alternative lengths)
Always verify system compatibility with your existing rack configuration and Proximitor model before ordering.
Our Quality Assurance Process
At Konmask.com, every Bently Nevada 330103-09-19-05-02-00 unit undergoes a rigorous multi-stage inspection before shipment:
- Visual Inspection: Probe tip, cable jacket, connector pins, and Proximitor housing checked for physical damage or corrosion.
- Functional Verification: Output signal linearity and sensitivity tested against Bently Nevada factory specifications.
- Documentation Review: Serial number traceability and certification records verified where available.
- Secure Packaging: Anti-static, shock-absorbing packaging to protect precision components during international transit.
How to Order
- Submit your inquiry via the Contact / Request a Quote form on this page.
- Provide your required quantity, delivery timeline, and destination country.
- Our technical team will confirm availability, lead time, and provide a formal quotation within 24 business hours.
- Upon order confirmation, we arrange secure packaging and international shipping with full tracking.
For urgent requirements or large-volume orders, contact us directly at support@konmask.com or call +0086 19859288691.
Why Choose Konmask.com?
- Industrial Automation Specialists: We focus exclusively on PLC, DCS, and rotating machinery protection components — no generalist catalog noise.
- Global B2B Supply: Serving engineering teams, MRO procurement departments, and EPC contractors across Asia, Europe, the Middle East, and the Americas.
- Technical Pre-Sales Support: Our engineers can assist with cross-referencing, compatibility verification, and system configuration questions before you commit to an order.
- Reliable Sourcing: Established supplier relationships ensure consistent access to both current-production and legacy/obsolete Bently Nevada parts.
- Fast Response: Quotations within 24 hours; expedited shipping options available for critical plant shutdowns.
Frequently Asked Questions
- Q: What is the difference between the 330103-09-19-05-02-00 and other 330103 variants?
- A: The 330103 series uses a standardized part numbering system where each segment encodes probe length, cable length, extension cable length, connector type, and approval options. The -09-19-05-02-00 suffix specifies a 9mm nose, 19-inch (approx. 0.5m) integral cable, 5m extension cable, standard connector, and no special approvals. Always match the full part number to your system documentation.
- Q: Is this unit compatible with the Bently Nevada 3500 rack system?
- A: Yes. The 330103-09-19-05-02-00 is fully compatible with the 3500 Series machinery protection rack when paired with the appropriate 3300 XL Proximitor® Sensor and monitor module.
- Q: Do you supply new, surplus, or refurbished units?
- A: Konmask.com supplies both new and tested surplus units. All units are clearly identified by condition in the quotation. We do not misrepresent product condition.
- Q: Can you provide a certificate of conformance or test report?
- A: Documentation availability varies by unit. Please specify your documentation requirements when submitting your inquiry and we will advise accordingly.
- Q: What is the typical lead time?
- A: In-stock units typically ship within 3–5 business days. Lead times for sourced units vary; we will confirm at the time of quotation.
{
“@context”: “https://schema.org/”,
“@type”: “Product”,
“name”: “Bently Nevada 330103-09-19-05-02-00 Proximity Transducer System”,
“description”: “Bently Nevada 330103-09-19-05-02-00 is a 3300 XL Series 8mm eddy-current proximity transducer system for non-contact shaft vibration and axial position monitoring in critical rotating machinery.”,
“sku”: “330103-09-19-05-02-00”,
“brand”: {
“@type”: “Brand”,
“name”: “Bently Nevada”
},
“manufacturer”: {
“@type”: “Organization”,
“name”: “Bently Nevada (Baker Hughes)”
},
“category”: “Proximity Transducer System”,
“url”: “https://konmask.com/products/bently-nevada-330103-09-19-05-02-00-proximity-transducer-system-3300xl”,
“offers”: {
“@type”: “Offer”,
“url”: “https://konmask.com/products/bently-nevada-330103-09-19-05-02-00-proximity-transducer-system-3300xl”,
“priceCurrency”: “USD”,
“availability”: “https://schema.org/InStock”,
“seller”: {
“@type”: “Organization”,
“name”: “Konmask.com”
}
}
}
{
“@context”: “https://schema.org”,
“@type”: “FAQPage”,
“mainEntity”: [
{
“@type”: “Question”,
“name”: “What is the difference between the 330103-09-19-05-02-00 and other 330103 variants?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “The 330103 series uses a standardized part numbering system where each segment encodes probe length, cable length, extension cable length, connector type, and approval options. The -09-19-05-02-00 suffix specifies a 9mm nose, 0.5m integral cable, 5m extension cable, standard connector, and no special approvals.”
}
},
{
“@type”: “Question”,
“name”: “Is the 330103-09-19-05-02-00 compatible with the Bently Nevada 3500 rack system?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Yes. The 330103-09-19-05-02-00 is fully compatible with the 3500 Series machinery protection rack when paired with the appropriate 3300 XL Proximitor Sensor and monitor module.”
}
},
{
“@type”: “Question”,
“name”: “Do you supply new, surplus, or refurbished units?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Konmask.com supplies both new and tested surplus units. All units are clearly identified by condition in the quotation.”
}
},
{
“@type”: “Question”,
“name”: “Can you provide a certificate of conformance or test report?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Documentation availability varies by unit. Please specify your documentation requirements when submitting your inquiry and we will advise accordingly.”
}
},
{
“@type”: “Question”,
“name”: “What is the typical lead time for the 330103-09-19-05-02-00?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “In-stock units typically ship within 3–5 business days. Lead times for sourced units vary; confirmed at time of quotation.”
}
}
]
}
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
