Turbine & Compressor Vibration Monitoring Solution — Bently Nevada 330104-00-02-15-02-00 | 3300 XL Series
Where This Product Is Used
The Bently Nevada 330104-00-02-15-02-00 is a complete eddy-current proximity transducer system engineered for continuous, non-contact shaft vibration and position measurement in rotating machinery. Typical deployment environments include:
- Steam & Gas Turbines — radial vibration and axial position monitoring on HP/LP rotors
- Centrifugal Compressors — shaft orbit analysis and bearing clearance trending in petrochemical trains
- Pumps & Fans — imbalance detection and early-warning protection in power generation BOP systems
- Gearboxes — differential expansion and eccentricity measurement in heavy industrial drives
- Marine Propulsion Systems — shaft monitoring in confined, high-vibration environments
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 330104-00-02-15-02-00 |
| Series | Bently Nevada 3300 XL |
| Sensor Type | Eddy-Current Proximity Transducer |
| Probe Tip Diameter | 8 mm (standard) |
| Cable Length (Probe) | 2 m (integral) |
| Extension Cable Length | 15 m |
| Proximitor / Driver | Included (3300 XL compatible) |
| Linear Range | 0.25 mm – 2.25 mm (nominal) |
| Scale Factor | 7.87 V/mm (200 mV/mil) |
| Frequency Response | DC – 10,000 Hz |
| Supply Voltage | -24 VDC (nominal) |
| Operating Temperature | -35 °C to +121 °C (probe); -35 °C to +66 °C (proximitor) |
| Target Material | AISI 4140 steel (standard) |
| Weight | 210 g (system) |
| Connector | 2-pin MIL-C-5015 (proximitor output) |
Why Engineers Specify This Model
- Complete System in One Part Number — probe, extension cable, and proximitor driver are factory-matched and calibrated as a unit, eliminating field calibration errors.
- 3300 XL Backward Compatibility — drop-in replacement for legacy 3300 series installations without rewiring or reconfiguration.
- High-Temperature Probe Rating — 121 °C continuous probe rating covers most steam turbine bearing housings without special cooling provisions.
- Wide Frequency Bandwidth — DC to 10 kHz response captures both slow-roll runout and high-frequency subsynchronous instability events.
- API 670 Compliant — meets the mandatory protection system standard for critical rotating equipment in oil & gas facilities.
- Long Extension Cable (15 m) — allows proximitor mounting in a safe, accessible location away from high-temperature or high-vibration zones.
Complete System Bill of Materials
- 1× 8 mm Eddy-Current Probe (2 m integral cable) — P/N 330104-00-02
- 1× Extension Cable, 15 m — P/N 330130-015-00-00
- 1× 3300 XL Proximitor Sensor / Driver — P/N 330180-X1-05
- Mounting hardware: 3/8-24 UNF jam nut, lock washer (included)
- Factory calibration certificate (traceable to NIST)
Note: Ordering the complete system part number 330104-00-02-15-02-00 ensures all three components are factory-matched. Mixing components from different system part numbers may affect scale factor accuracy.
Compliance & Industry Standards
- API 670 (5th Edition) — Machinery Protection Systems
- API 670 Annex D — Eddy-Current Transducer Systems
- IEC 61511 — Functional Safety (SIL-capable installations)
- CE Marking — EMC Directive 2014/30/EU
- RoHS Compliant
- ATEX / IECEx — consult factory for zone-rated variants
Quality Assurance & Sourcing
Every unit offered by Konmask.com undergoes a multi-point inspection protocol before shipment:
- Visual inspection of probe tip, cable jacket, and connector pins
- Electrical continuity and insulation resistance check
- Scale factor verification against factory calibration data
- Packaging integrity check — anti-static bag, foam-lined carton
We source from authorized distribution channels and maintain full traceability records. Counterfeit or grey-market parts are never knowingly stocked.
How to Source This Part
To place an order or request a formal quotation for the Bently Nevada 330104-00-02-15-02-00:
- Online: Add to cart directly on this page — stock availability shown in real time.
- Email RFQ: support@konmask.com — include quantity, required delivery date, and ship-to country.
- Phone / WhatsApp: +0086 19859288691 (Mon–Fri, 09:00–18:00 CST)
- Lead Time: In-stock orders ship within 1–3 business days; ex-stock lead time 2–4 weeks.
- Export: We handle export documentation (CO, packing list, commercial invoice) for international shipments.
Application-Specific FAQ
Q: Can this transducer system be used with a Bently Nevada 3500 rack?
A: Yes. The 3300 XL proximity transducer system is compatible with the 3500/40M Proximitor I/O module when configured for 3300 XL transducers. Verify the I/O module jumper settings before installation.
Q: What is the maximum shaft speed this system can monitor?
A: The 10 kHz frequency response supports shaft speeds up to approximately 600,000 RPM for 1× vibration measurement, well beyond the range of any industrial rotating machine.
Q: Is the 15 m extension cable length fixed, or can I use a different length?
A: The extension cable length is encoded in the part number (positions 5–6: “15” = 15 m). For other lengths (5 m, 9 m, 30 m), a different part number suffix is required. Contact us for alternate configurations.
Q: How do I verify the system is calibrated correctly after installation?
A: With the shaft stationary and at the nominal gap (1.0 mm / 40 mil), the proximitor output should read approximately −10.0 VDC ± 0.5 V. Refer to Bently Nevada document 141536-01 for full calibration procedure.
Q: Can this probe be used on stainless steel shafts?
A: Stainless steel (e.g., 316 SS) has different magnetic permeability than AISI 4140, which shifts the scale factor. A target material correction factor must be applied. Contact our engineering team for recalibration data.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






