Bently Nevada 330104-05-10-15-01-00 Proximity Transducer System | Replacement, Equivalent & Selection Guide
The Bently Nevada 330104-05-10-15-01-00 is a complete eddy-current proximity transducer system from the industry-standard 3300 XL Series, designed for continuous, non-contact measurement of shaft radial vibration, axial position, and differential expansion in rotating machinery. Konmask.com supplies genuine and compatible units with full traceability for critical industrial applications.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 330104-05-10-15-01-00 |
| Brand / Manufacturer | Bently Nevada (Baker Hughes) |
| Series | 3300 XL Proximity Transducer System |
| Probe Tip Diameter | 5 mm (8 mm thread) |
| Cable Length (Probe) | 1.0 m (integral) |
| Extension Cable Length | 1.5 m |
| Driver / Oscillator | 3300 XL 8 mm Driver |
| Measurement Range | 0.25 – 2.25 mm (linear range) |
| Sensitivity | 7.87 V/mm (200 mV/mil) |
| Supply Voltage | −24 VDC (nominal) |
| Output | −1 to −17 VDC (proportional to gap) |
| Frequency Response | DC to 10,000 Hz (−3 dB) |
| Target Material | AISI 4140 steel (standard) |
| Temperature Range | −35 °C to +177 °C (probe) |
| Approvals | CE, ATEX, IECEx (consult datasheet) |
| Weight | ~210 g (system) |
Compatible Replacement & Equivalent Models
When the 330104-05-10-15-01-00 is unavailable or requires a cost-effective alternative, the following models offer direct or near-direct compatibility:
| Model | Brand | Compatibility Notes |
|---|---|---|
| 330104-05-10-10-01-00 | Bently Nevada | Same probe/driver; 1.0 m extension cable (vs 1.5 m) |
| 330104-05-10-20-01-00 | Bently Nevada | Same probe/driver; 2.0 m extension cable |
| 330180-X1-05 | Bently Nevada | 3300 NSv series; compatible driver, verify gap range |
| PR6423/010-030 | EPRO (Baker Hughes) | 8 mm eddy-current; same sensitivity, direct replacement |
| CS-1 / CS-3 | Metrix (Roper Technologies) | Functional equivalent; verify connector pinout |
| TQ-series 8 mm | Wilcoxon / Amphenol | Cross-reference required; confirm driver compatibility |
Always verify gap, sensitivity, cable length, and driver compatibility before substituting. Contact support@konmask.com for a free cross-reference check.
Why Choose the Original 330104-05-10-15-01-00
- Factory-calibrated sensitivity (7.87 V/mm) ensures direct plug-in replacement with no recalibration of the monitoring system.
- Full 3300 XL system compatibility — works seamlessly with Bently Nevada 3300/3500 series monitors and System 1 software.
- Proven MTBF in high-temperature, high-vibration environments (turbines, compressors, pumps).
- Regulatory approvals (ATEX/IECEx) for hazardous-area installations.
- Traceability — each unit ships with certificate of conformance and original packaging.
Typical Applications
- Shaft radial vibration monitoring on steam and gas turbines
- Axial position / thrust measurement on centrifugal compressors
- Differential expansion monitoring on large rotating machinery
- Eccentricity and speed measurement (keyphasor reference)
- Petrochemical, power generation, and LNG plant machinery protection
System Compatibility
The 330104-05-10-15-01-00 is designed to operate as part of the Bently Nevada 3300 XL Proximity Transducer System and is compatible with:
- Bently Nevada 3300 XL 8 mm Drivers (330180 series)
- Bently Nevada 3500 Series Machinery Protection System monitors
- Bently Nevada System 1 condition monitoring software
- Any eddy-current monitoring system accepting −24 VDC supply and −1 to −17 VDC output
Selection Guide
Use the table below to select the correct 330104 variant for your installation:
| Requirement | Recommended Model |
|---|---|
| Standard 1.5 m extension, 8 mm probe | 330104-05-10-15-01-00 ✓ (this item) |
| Shorter 1.0 m extension | 330104-05-10-10-01-00 |
| Longer 2.0 m extension | 330104-05-10-20-01-00 |
| High-temperature environment (>177 °C) | Contact us — special-order variants available |
| ATEX Zone 0 hazardous area | Confirm approval suffix with Konmask team |
| Budget-conscious / aftermarket | EPRO PR6423/010-030 (cross-reference verified) |
Quality Assurance & Sourcing
- Source: Authorized distributor stock and certified surplus channels
- Inspection: Each unit inspected for physical integrity and part number verification before shipment
- Documentation: Certificate of conformance available on request
- Warranty: 12-month warranty against manufacturing defects
- Lead time: In-stock units ship within 1–3 business days; contact us for urgent requirements
How to Order
- Confirm your part number: 330104-05-10-15-01-00
- Specify quantity and required delivery date
- Request a quote via support@konmask.com or add to cart directly
- Provide your shipping address and preferred freight method
- Receive order confirmation with tracking within 24 hours
For bulk orders (>5 units) or OEM procurement, contact our B2B team for volume pricing.
Replacement & Compatibility FAQ
Q: Can I use the 330104-05-10-15-01-00 with a 3500 series monitor?
A: Yes. The 3300 XL probe system is fully compatible with Bently Nevada 3500 series monitors when used with the appropriate driver module.
Q: What is the difference between 330104-05-10-15-01-00 and 330104-05-10-10-01-00?
A: The only difference is the extension cable length — 1.5 m vs 1.0 m. All other electrical and mechanical specifications are identical.
Q: Is the EPRO PR6423 a drop-in replacement?
A: The PR6423/010-030 is electrically equivalent (same sensitivity, supply voltage, and output range). Connector and mounting thread should be verified for your specific installation.
Q: Do you supply calibration certificates?
A: Yes. Factory calibration data and certificates of conformance are available upon request at no additional charge.
Q: Can you source obsolete or long-lead Bently Nevada parts?
A: Yes. Konmask.com specializes in sourcing hard-to-find industrial automation components. Submit your part number at support@konmask.com.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






