Vibration Monitoring Solution – Bently Nevada 330104-00-07-05-01-CN | 3300 XL Series
The Bently Nevada 330104-00-07-05-01-CN is a high-precision eddy-current proximity transducer system engineered for continuous, non-contact measurement of shaft radial vibration, axial position, and differential expansion in rotating machinery. Part of the industry-standard 3300 XL Series, this system delivers the measurement accuracy and long-term reliability demanded by power generation, oil & gas, and petrochemical plant operators worldwide.
Where This Product Is Used
Engineers and reliability teams specify the 330104-00-07-05-01-CN across a broad range of critical rotating machinery applications:
- Steam & Gas Turbines – Continuous shaft radial vibration monitoring to detect rotor imbalance, misalignment, and bearing wear before catastrophic failure.
- Centrifugal & Axial Compressors – Axial position and thrust monitoring to protect against surge events and seal damage in upstream and midstream compression trains.
- Boiler Feed Pumps & Large Pumps – Shaft displacement measurement for predictive maintenance scheduling in power plant auxiliary systems.
- Gearboxes & Expanders – Non-contact measurement eliminates sensor wear in high-speed, high-temperature gear trains.
- Marine Propulsion Systems – Vibration monitoring on main propulsion shafts and auxiliary machinery in LNG carriers and offshore platforms.
- Paper & Steel Mill Drives – Continuous monitoring of large induction motor shafts and drive-end bearings in process-critical applications.
Technical Specifications
- Part Number: 330104-00-07-05-01-CN
- Series: Bently Nevada 3300 XL Proximity Transducer System
- Measurement Type: Eddy-current, non-contact displacement
- Probe Cable Length: 5 m (standard)
- Extension Cable Length: 5 m (standard)
- Linear Range: 0–2 mm (0–80 mil)
- Sensitivity: 7.87 V/mm (200 mV/mil)
- Frequency Response: DC to 10,000 Hz
- Operating Temperature (Probe): −35 °C to +177 °C
- Operating Temperature (Driver): −35 °C to +85 °C
- Supply Voltage: −24 VDC (nominal)
- Output Signal: −2 VDC to −18 VDC (linear)
- Target Material: AISI 4140 steel (standard); other alloys available
- Approvals: CE, ATEX, IECEx (see compliance section)
- Weight: Approx. 40 g (probe assembly)
Why Engineers Specify This Model
- Drop-in 3300 XL Compatibility – Direct replacement for existing 3300 XL installations; no recalibration of the monitoring system required when replacing like-for-like.
- Proven MTBF > 150,000 Hours – Solid-state eddy-current technology with no moving parts ensures decades of uninterrupted service in harsh plant environments.
- API 670 Compliant – Meets the mandatory machinery protection standard for critical turbomachinery in oil & gas facilities.
- Wide Temperature Tolerance – Probe rated to +177 °C allows direct installation adjacent to hot bearing housings without thermal derating.
- CN Suffix Variant – Configured for Chinese national market compliance and documentation requirements, simplifying customs clearance and local inspection.
- Plug-and-Play with Bently Nevada 3500 Rack – Fully compatible with 3500/40M, 3500/42M, and 3500/45 monitor modules for seamless integration into existing protection systems.
Complete System Bill of Materials
The 330104-00-07-05-01-CN ships as a complete, calibrated system. Typical companion components for a full installation include:
- 330104-00-07-05-01-CN – Proximity Probe + Extension Cable + Driver (this listing)
- Bently Nevada 3500/40M – Proximitor / Seismic Monitor Module
- Bently Nevada 3500/20 – Power Supply Module
- Bently Nevada 3500/22M – Transient Data Interface
- Bently Nevada 330130-045-00-00 – Proximitor Sensor (driver, if purchased separately)
- Mounting hardware: Probe holder, lock nut, and armored conduit fittings (site-supplied)
Contact Konmask for bundle pricing on complete 3500 rack assemblies.
Compliance & Industry Standards
- API 670 – Machinery Protection Systems (5th Edition)
- ISO 10816 / ISO 20816 – Mechanical vibration evaluation of machines
- IEC 61511 – Functional safety for process industry sectors (SIL-capable installations)
- ATEX Directive 2014/34/EU – Equipment for explosive atmospheres (Zone 1/Zone 2)
- IECEx IEC 60079 – International explosive atmosphere certification
- CE Marking – European conformity
- GB Standards – Compliant with applicable Chinese national standards (CN variant)
Quality Assurance & Sourcing
Every unit offered by Konmask.com undergoes a structured verification process before dispatch:
- Visual and dimensional inspection against OEM drawings
- Functional output voltage check across the full linear range
- Calibration certificate review (where supplied by manufacturer)
- Secure anti-static packaging with humidity indicator card
- Traceability documentation retained for 5 years
Konmask specializes in genuine and OEM-equivalent industrial automation components. We source directly from authorized distributors and verified surplus channels. All products carry a 12-month warranty against manufacturing defects.
How to Source This Part
- In-Stock Orders: Add to cart and check out online. Orders placed before 14:00 CST ship same business day.
- Lead-Time Orders: Contact us for factory-fresh units with full OEM documentation. Typical lead time: 3–6 weeks.
- Bulk / Project Quotes: Email support@konmask.com with your BOM for volume pricing.
- Urgent Shutdown Requirements: Call +0086 198 5928 8691 for expedited sourcing support.
- Export & Cross-Border: We ship globally with full commercial invoice, packing list, and HS code documentation for customs clearance.
Application-Specific FAQ
Q: Is the 330104-00-07-05-01-CN a direct replacement for the 330104-00-07-05-01-00?
A: Yes. The CN suffix denotes the Chinese market documentation variant. Electrically and mechanically, it is identical to the -00 suffix version and is a direct drop-in replacement.
Q: Can this transducer be used with a Bently Nevada 3300 monitor (not 3500)?
A: Yes. The 3300 XL probe system is backward-compatible with 3300 series monitors. Verify the driver gap voltage range matches your monitor’s input specification before installation.
Q: What is the maximum shaft speed this system can monitor?
A: The 330104 series has a frequency response of DC to 10,000 Hz, making it suitable for machinery operating up to approximately 600,000 RPM in vibration measurement mode (application-dependent).
Q: Do you supply calibration certificates?
A: Calibration documentation is provided where available. For new OEM units, factory calibration data is included. Contact us to confirm documentation availability for your specific order.
Q: Can Konmask assist with installation or commissioning?
A: We provide technical pre-sales support and can connect you with certified Bently Nevada service partners in your region. Contact support@konmask.com for referrals.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






