Vibration & Shaft Position Monitoring Solution – Bently Nevada 330104-00-14-05-01-00 | 3300 XL Series
The Bently Nevada 330104-00-14-05-01-00 is a high-precision eddy-current proximity transducer system engineered for continuous, non-contact measurement of shaft radial vibration, axial position, and differential expansion in rotating machinery. Part of the industry-standard 3300 XL Series, this system is the preferred choice of reliability engineers and OEM integrators worldwide.
Where This Product Is Used
This proximity transducer system is deployed across a wide range of critical rotating machinery applications:
- Steam & Gas Turbines – Continuous shaft radial vibration and axial position monitoring to detect rotor instability and thrust bearing wear.
- Centrifugal Compressors – Real-time orbit analysis and gap voltage trending for predictive maintenance in petrochemical and LNG plants.
- Pumps & Fans – Shaft displacement monitoring to prevent seal damage and unplanned shutdowns in power generation and water treatment facilities.
- Gearboxes – Gear mesh frequency analysis and shaft position tracking in heavy industrial drives.
- Electric Motors (>500 kW) – Rotor eccentricity and bearing clearance monitoring in steel mills and mining operations.
- Expanders & Turbomachinery – Differential expansion measurement in cryogenic and refinery service.
Technical Specifications
- Part Number: 330104-00-14-05-01-00
- Series: Bently Nevada 3300 XL Proximity Transducer System
- Sensing Technology: Eddy-current (non-contact)
- Cable Length: 14 in (355 mm) – encoded in SKU position 3
- Extension Cable: 5 m – encoded in SKU position 4
- Driver/Oscillator: 3300 XL 8 mm Proximitor® Sensor compatible
- Probe Tip Diameter: 8 mm
- Measurement Range: 0.25 mm – 2.25 mm (linear range)
- Output: –24 VDC nominal, –200 mV/mil (–7.87 V/mm) scale factor
- Frequency Response: DC to 10,000 Hz
- Temperature Range: –35°C to +177°C (probe); –35°C to +85°C (Proximitor)
- Target Material: AISI 4140 steel (standard); other alloys with derating
- Connector: Integral coaxial, reverse-polarity protected
- Weight: ~80 g (probe + cable assembly)
- Approvals: CE, FM, CSA (see Compliance section)
Why Engineers Specify This Model
- Drop-in 3300 XL compatibility – Directly replaces legacy 3300 series probes without recalibration of the monitoring system.
- Armored cable construction – Stainless-steel braid protects against mechanical damage in harsh plant environments.
- Traceable calibration – Each unit ships with a factory calibration certificate traceable to NIST standards.
- Long-term availability – Konmask stocks genuine and OEM-equivalent units to support installed base maintenance without extended lead times.
- Plug-and-play integration – Compatible with Bently Nevada 3500 Series rack monitors, System 1® software, and third-party DCS/SCADA via 4–20 mA or Modbus RTU.
Complete System Bill of Materials
A fully functional proximity transducer loop requires the following components:
- Probe: 330104-00-14-05-01-00 (this item)
- Extension Cable: Included in this assembly (5 m)
- Proximitor® Sensor / Driver: Bently Nevada 330180-X1-CN or 330130-040-00-00
- Mounting Hardware: Bently Nevada 330105-02-12-10-02-00 (bracket kit)
- Monitor Rack Card: Bently Nevada 3500/40M Proximitor/Seismic Monitor
- Barrier (if IS required): MTL 787S+ or P&F KFD2-STC4-Ex1.H
Compliance & Industry Standards
- CE Marking – EMC Directive 2014/30/EU; Low Voltage Directive 2014/35/EU
- FM Approved – Class I, Division 1 & 2, Groups A–D (with appropriate barrier)
- CSA Certified – Class I, Division 1 & 2
- API 670 – Meets requirements for machinery protection systems (5th Edition)
- IEC 60079 – Suitable for use in Zone 1 & Zone 2 hazardous areas with certified barriers
- ISO 10816 / ISO 20816 – Compatible measurement chain for machinery vibration evaluation
Quality Assurance & Sourcing
Konmask.com sources industrial automation components through verified supply channels. Every unit undergoes:
- Visual and dimensional inspection against OEM drawings
- Electrical continuity and insulation resistance testing
- Gap voltage verification at 25°C against factory calibration data
- Secure anti-static packaging with tamper-evident sealing
Traceability documentation (lot number, test report, country of origin) is available upon request for regulated industries.
How to Source This Part
Ready to order or need a formal quotation? Contact our technical sales team:
- Email: support@konmask.com
- Phone / WhatsApp: +0086 19859288691
- Lead Time: In-stock units ship within 1–3 business days; ex-stock China warehouse
- MOQ: 1 piece
- Payment: T/T, PayPal, credit card via Shopify Payments
- Export: DDP / DAP worldwide; HS Code 9031.80 (precision instruments)
Application-Specific FAQ
Q: Is the 330104-00-14-05-01-00 compatible with the Bently Nevada 3500 monitoring rack?
A: Yes. This probe is fully compatible with the 3500/40M Proximitor/Seismic Monitor card and all 3300 XL Proximitor sensors.
Q: Can this transducer be used on non-ferrous targets such as titanium or aluminum?
A: Yes, with a derating factor applied to the scale factor. Bently Nevada provides target material correction curves in the product manual (document 141356-01).
Q: What is the maximum shaft speed this system can monitor?
A: The 3300 XL system supports frequency response to 10,000 Hz, making it suitable for machinery operating up to 600,000 RPM in specialized applications.
Q: Does this unit come with a calibration certificate?
A: Yes. Factory calibration data is included. NIST-traceable third-party calibration certificates are available on request.
Q: Can I use this probe in a Zone 1 hazardous area?
A: Yes, when installed with a certified intrinsic safety barrier (e.g., MTL 787S+ or equivalent) per IEC 60079-11.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
