Rotating Machinery Vibration Monitoring Solution – Bently Nevada 330104-00-17-05-02-CN | 3300 XL Series
The Bently Nevada 330104-00-17-05-02-CN is a high-precision eddy-current proximity transducer system engineered for continuous, non-contact measurement of shaft radial vibration, axial position, and differential expansion in critical rotating machinery. As part of the industry-standard 3300 XL Series, this system is the preferred choice of reliability engineers and OEM integrators worldwide.
Where This Product Is Used
This proximity transducer system is deployed across the most demanding industrial environments where shaft vibration data is mission-critical:
- Steam & Gas Turbines – Continuous radial vibration and axial position monitoring on HP/LP turbine shafts to detect imbalance, misalignment, and rub events before catastrophic failure.
- Centrifugal Compressors – Real-time shaft orbit analysis in petrochemical and LNG plants; integrated with API 670-compliant protection systems.
- Pumps & Fans (BFW, Cooling Tower) – Early-warning vibration trending on boiler feed water pumps and large induced-draft fans in power generation facilities.
- Gearboxes & Expanders – Differential expansion and eccentricity measurement in high-speed gearboxes and turbo-expanders in refinery service.
- Marine Propulsion Systems – Shaft monitoring on diesel-electric and LNG-fueled vessels requiring DNV/ABS-certified instrumentation.
- Pulp & Paper / Steel Mills – Continuous monitoring of large ID fans, rolling mill drives, and press section rolls to minimize unplanned downtime.
Technical Specifications
- Part Number: 330104-00-17-05-02-CN
- Series: Bently Nevada 3300 XL
- Sensor Type: Eddy-Current Proximity Transducer (Non-contact)
- Probe Tip Diameter: 8 mm (standard)
- Cable Length: 5 m (extension cable included)
- Linear Range: 0.25 mm – 2.25 mm (10 mil – 90 mil)
- Scale Factor: 7.87 V/mm (200 mV/mil)
- Frequency Response: 0 Hz – 10,000 Hz (–3 dB)
- Operating Temperature: –35 °C to +177 °C (probe); –35 °C to +66 °C (driver)
- Supply Voltage: –24 VDC (nominal)
- Output: –2 VDC to –18 VDC (linear range)
- Connector: CN (Chinese market standard connector)
- Approvals: CE, ATEX (Ex ia IIC T6), IECEx, FM
- Weight: ~40 g (probe assembly)
Why Engineers Specify This Model
- API 670 Compliance – Meets the 5th Edition standard for machinery protection systems; accepted by EPC contractors and end-users globally.
- CN Connector Variant – Purpose-built for Chinese domestic installations; eliminates field adapter requirements and reduces installation time.
- Proven 3300 XL Platform – Backward-compatible with existing 3300 series monitors (3300/16, 3500/42M, etc.), protecting prior capital investment.
- Wide Temperature Range – Probe rated to +177 °C; suitable for hot-section turbine bearing pedestals without additional thermal protection.
- EMI/RFI Immunity – Shielded coaxial cable construction rejects interference in VFD-dense environments.
- Long-term Availability – Konmask maintains verified stock of legacy and current 3300 XL variants to support long-lifecycle plant assets.
Complete System Bill of Materials
A complete 3300 XL proximity transducer system for one measurement point typically includes:
- 330104-00-17-05-02-CN – Proximity Probe (this item)
- 330130-045-00-00 – Extension Cable, 5 m
- 330180-X1-05 – Proximitor® Driver / Signal Conditioner
- 3500/42M – Proximitor®/Seismic Monitor Module (rack-mount)
- 3500/05-01-02-00-00-01 – Power Supply Module
- 3500/92 – Communication Gateway Module (optional, for DCS integration)
Contact support@konmask.com to request a complete BOM quotation for your application.
Compliance & Industry Standards
- API 670 – Machinery Protection Systems (5th Edition)
- ISO 10816 / ISO 20816 – Mechanical Vibration Evaluation
- IEC 60079 – Explosive Atmospheres (ATEX / IECEx certified)
- CE Marking – EU Machinery Directive 2006/42/EC
- FM Approved – Class I, Division 1, Groups A, B, C, D
- GB/T 13823 – Chinese National Standard for Vibration Transducers
Quality Assurance & Sourcing
Every 330104-00-17-05-02-CN unit shipped by Konmask undergoes the following verification process:
- Visual and dimensional inspection against OEM drawings
- Scale factor verification (7.87 V/mm ± 3%) using calibrated gap-setting fixture
- Insulation resistance test (>100 MΩ at 500 VDC)
- Serialization and traceability documentation provided with each shipment
- Sourced from authorized distributors and verified surplus channels; no counterfeit-risk grey-market supply
How to Source This Part
- In-Stock Orders: Add to cart and check out online; same-day dispatch for orders placed before 14:00 CST.
- Bulk / Project Quotation: Email support@konmask.com with your project BOM for volume pricing.
- Urgent / Shutdown Support: Call +0086 198-5928-8691 for emergency sourcing assistance 7 days a week.
- Export & Customs: Konmask handles export documentation (CO, packing list, commercial invoice) for international shipments.
Application-Specific FAQ
Q: Is the 330104-00-17-05-02-CN compatible with the Bently Nevada 3500 rack?
A: Yes. The 3300 XL probe is fully compatible with 3500 series Proximitor® monitors (e.g., 3500/42M) when used with the correct extension cable and driver.
Q: What does the “-CN” suffix indicate?
A: The CN suffix designates the Chinese-market connector variant, which uses a locally standardized connector body. It is electrically identical to the standard version.
Q: Can this probe be used in a hazardous area (Zone 1)?
A: Yes. The 330104 series carries ATEX Ex ia IIC T6 and IECEx certification, making it suitable for Zone 0/1 hazardous areas when installed per the control drawing.
Q: What is the recommended gap voltage for steel shafts?
A: For AISI 4140 steel, the nominal gap is 1.0 mm (40 mil), corresponding to an output of approximately –10.2 VDC. Always verify with the system calibration curve for your specific shaft material.
Q: Do you provide calibration certificates?
A: Yes. Calibration documentation and traceability records are available upon request at time of order.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






