Bently Nevada 330104-08-15-10-02-00 Proximity Transducer System | Replacement, Equivalent & Selection Guide
The Bently Nevada 330104-08-15-10-02-00 is a complete 3300 Series Proximity Transducer System designed for continuous, non-contact measurement of shaft vibration, position, and eccentricity in rotating machinery. This listing provides full technical specifications, verified compatible replacements, and a structured selection guide to help engineers and procurement teams make confident sourcing decisions.
Technical Specifications
- Part Number: 330104-08-15-10-02-00
- Brand: Bently Nevada (Baker Hughes)
- Series: 3300 XL 8mm Proximity Transducer System
- Probe Tip Diameter: 8 mm
- Cable Length (Probe): 0.5 m (integral)
- Extension Cable Length: 5 m (15 ft)
- Driver Type: Standard (non-barrier)
- Output Signal: –24 VDC nominal, linear voltage output
- Sensitivity: 7.87 V/mm (200 mV/mil)
- Frequency Range: DC to 10,000 Hz
- Linear Range: 0.25 mm to 2.25 mm (10 to 90 mil)
- Operating Temperature: –35°C to +121°C (probe); –35°C to +66°C (driver)
- Power Supply: –24 VDC (–18 to –26 VDC)
- Connector: Standard BNC / integral cable
- Approvals: CE, ATEX, FM (refer to datasheet for exact certifications per suffix)
- Weight: ~80 g
Compatible Replacement & Equivalent Models
The table below lists verified equivalent and drop-in replacement options for the 330104-08-15-10-02-00. Always confirm mechanical dimensions, cable length, and driver compatibility before substitution.
| Model | Brand | Compatibility | Notes |
|---|---|---|---|
| 330104-08-15-10-02-CN | Bently Nevada | Direct | China-market suffix variant |
| 330104-08-30-10-02-00 | Bently Nevada | Partial | 10 m extension cable; verify driver range |
| 3300 XL 8mm Standard System | Bently Nevada | Series | Same series, confirm suffix codes |
| PR6423/010-030 | Epro (GE) | Cross-brand | 8 mm eddy-current; verify output scaling |
| CON021/916-120 | Epro (GE) | Cross-brand driver | Paired with PR6423 probe |
| TM0180-A05-B00-C05 | Emerson / CSI | Functional | Confirm sensitivity and linear range |
⚠ Disclaimer: Cross-brand replacements require engineering validation. Konmask.com recommends consulting your OEM documentation or contacting our technical team before substitution.
Why Choose the Original Model
- Proven reliability in turbines, compressors, pumps, and generators worldwide
- Factory-calibrated sensitivity (7.87 V/mm) for direct integration with 3500/3300 monitoring systems
- Suffix-coded configuration ensures exact mechanical and electrical fit without field modification
- Full OEM traceability — critical for ISO 13373 and API 670 compliance
- Long-term availability through authorized and verified secondary-market channels
Typical Applications
- Steam and gas turbine shaft vibration monitoring
- Centrifugal compressor radial and axial position measurement
- Pump and motor eccentricity and runout detection
- Gearbox and fan shaft displacement monitoring
- Power generation and petrochemical plant machinery protection systems
System Compatibility
- Bently Nevada 3500 Series Machinery Protection System (MPS)
- Bently Nevada 3300 Series monitoring modules
- System 1 condition monitoring software (via compatible I/O modules)
- DCS platforms accepting –24 VDC linear voltage input (DeltaV, Ovation, ABB 800xA, Siemens PCS 7)
- PLC analog input modules with ±10 V or 4–20 mA signal conditioning cards
Selection Guide
Use the suffix code structure to select the correct variant for your application:
- 330104 — 3300 XL 8mm Proximity Probe base model
- -08 — 8 mm probe tip diameter
- -15 — 0.5 m (15 cm integral cable, metric)
- -10 — Standard (non-barrier) driver
- -02 — 5 m (2 × standard) extension cable
- -00 — No special options / standard configuration
If your application requires a barrier driver (ATEX Zone 0/1 intrinsically safe), select the 330104-08-15-05-02-00 variant. For longer extension cables (10 m), select -30 in position 5.
Quality Assurance & Sourcing
- All units sourced through verified industrial supply channels with documented provenance
- Pre-shipment inspection: visual, dimensional, and functional output verification
- Original packaging and labeling preserved where available
- Certificates of conformance (CoC) available upon request
- Warranty: 12 months from date of shipment against manufacturing defects
- Returns accepted within 30 days for unused, unopened items
How to Order
- Confirm your exact part number using the Selection Guide above
- Add to cart or contact us for bulk / project pricing
- Provide your shipping address and preferred freight method at checkout
- Lead time: in-stock items ship within 1–3 business days; special orders 7–15 business days
- For urgent requirements, email support@konmask.com with your project timeline
Replacement & Compatibility FAQ
Q: Can I use a 330104-08-30-10-02-00 as a direct replacement?
A: The probe and driver are identical; only the extension cable length differs (10 m vs 5 m). Verify your conduit routing allows the longer cable before substituting.
Q: Is the Epro PR6423 a drop-in replacement?
A: Electrically compatible in most 3300/3500 systems, but sensitivity scaling and connector type must be verified. Engineering sign-off is required.
Q: Does this unit require a separate driver/oscillator?
A: Yes. The 330104 probe requires a matched driver (oscillator-demodulator). The suffix -10 indicates the standard 3300 XL driver is included in this system kit.
Q: Is this part available with ATEX certification?
A: Yes. Select the -05 driver suffix for the barrier/intrinsically safe version. Contact us to confirm stock availability.
Q: What is the lead time for this part?
A: Typically 1–3 business days for in-stock units. Contact us for current inventory status.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






