Bently Nevada 330104-04-10-10-02-00 Proximity Transducer System | Replacement, Equivalent & Selection Guide
The Bently Nevada 330104-04-10-10-02-00 is a high-precision eddy-current proximity transducer system designed for continuous shaft vibration and position monitoring in rotating machinery. As an authorized distributor and sourcing specialist, Konmask.com supplies both original and verified-equivalent units with full traceability.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 330104-04-10-10-02-00 |
| Brand | Bently Nevada (Baker Hughes) |
| Series | 3300 XL 8mm Proximity Transducer System |
| Probe Cable Length | 1.0 m (extension cable) |
| Tip Diameter | 8 mm |
| Measurement Range | 0–2.0 mm (0–80 mil) |
| Sensitivity | 7.87 V/mm (200 mV/mil) |
| Supply Voltage | −24 VDC (nominal) |
| Output | −1 VDC to −17 VDC |
| Frequency Response | DC to 10 kHz (−3 dB) |
| Temperature Range | −35°C to +121°C (probe) |
| Connector | Integral 2-pin MIL-C-5015 |
| Approvals | CE, ATEX, FM, CSA |
| Weight | ~80 g (probe + cable assembly) |
Compatible Replacement & Equivalent Models
The following models are functionally compatible or direct replacements for the 330104-04-10-10-02-00. Always verify system configuration before substitution.
| Part Number | Brand | Notes |
|---|---|---|
| 330104-04-12-10-02-00 | Bently Nevada | Same probe, 1.2 m cable variant |
| 330104-04-08-10-02-00 | Bently Nevada | 0.8 m cable variant |
| 330180-X1-05 | Bently Nevada | 3300 XL 5mm series, check gap range |
| PR6423/010-030 | Epro (Baker Hughes) | 8mm eddy-current, compatible driver |
| CON021/916-000 | Epro | Matching driver/conditioner unit |
| TQ401/TQ402 | Metrix | Cross-reference; verify sensitivity |
Note: Substitution requires matching sensitivity (7.87 V/mm), gap range, and driver compatibility. Contact support@konmask.com for a free cross-reference check.
Why Choose the Original Model
- Factory-calibrated sensitivity and linearity — no field adjustment required.
- Full API 670 compliance for turbomachinery protection systems.
- Proven reliability in power generation, oil & gas, and petrochemical plants worldwide.
- Seamless integration with Bently Nevada 3500 Series rack monitors and System 1 software.
- ATEX / FM certified for hazardous area installations.
Typical Applications
- Steam and gas turbine shaft radial vibration monitoring
- Compressor rotor position and thrust measurement
- Pump and motor bearing proximity sensing
- Gearbox and expander differential expansion measurement
- API 670-compliant machinery protection systems
System Compatibility
The 330104-04-10-10-02-00 probe is designed to operate as part of the Bently Nevada 3300 XL Proximity Transducer System, which includes:
- Probe: 330104 series (8 mm tip)
- Extension Cable: 330130 / 330140 series
- Driver/Oscillator: 330180 series
- Monitor Rack: Bently Nevada 3500 Series (e.g., 3500/40M, 3500/42M)
- Software: System 1 Evolution / System 1 Condition Monitoring
Confirm driver gap voltage (−10.0 VDC ±0.5 V at mid-range) during installation.
Selection Guide
Use the table below to select the correct 330104 variant for your application:
| Requirement | Recommended Model |
|---|---|
| Standard 1.0 m cable, 8 mm probe | 330104-04-10-10-02-00 ✓ |
| Shorter 0.8 m cable needed | 330104-04-08-10-02-00 |
| Longer 1.2 m cable needed | 330104-04-12-10-02-00 |
| 5 mm probe for tight clearance | 330180-X1-05 + matching driver |
| Budget-conscious, non-OEM | Epro PR6423 series (verify) |
| Hazardous area (Zone 1) | Confirm ATEX suffix on order |
Quality Assurance & Sourcing
- All units sourced from authorized distributors or OEM-certified channels.
- Each shipment includes test report / calibration certificate upon request.
- Inventory inspected for authenticity — counterfeit-free guarantee.
- Packaging preserved in original anti-static, moisture-proof condition.
- Lead time: In-stock items ship within 2 business days; sourced items 7–15 days.
How to Order
- Click Add to Cart or contact us directly for bulk / project pricing.
- Provide your full part number (e.g., 330104-04-10-10-02-00) and required quantity.
- Specify any certifications needed (ATEX, FM, CE documentation).
- Our team will confirm availability, lead time, and issue a formal quotation within 24 hours.
📧 support@konmask.com | 📞 +0086 19859288691 | 🌐 Konmask.com
Replacement & Compatibility FAQ
Q: Can I use a 330104-04-12-10-02-00 in place of the 330104-04-10-10-02-00?
A: Yes — the only difference is cable length (1.2 m vs 1.0 m). Electrical performance is identical.
Q: Is the Epro PR6423 a drop-in replacement?
A: Electrically compatible in most cases, but requires driver matching. Contact us for a system-level review.
Q: Does this probe work with the Bently Nevada 3500/40M monitor?
A: Yes. The 330104 series is fully compatible with the 3500 Series rack when paired with the correct 330180 driver.
Q: Do you supply calibration certificates?
A: Yes — calibration and test reports are available upon request at no extra charge.
Q: What is the warranty?
A: 12-month warranty against manufacturing defects. Replacement or full refund guaranteed.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






