Bently Nevada 330173-10-18-10-02-00 Proximity Transducer System | Replacement, Equivalent & Selection Guide
The Bently Nevada 330173-10-18-10-02-00 is a high-precision eddy-current proximity transducer system designed for continuous vibration and position monitoring of rotating machinery. As an authorized sourcing partner, Konmask.com supplies both genuine units and verified compatible replacements to keep your plant running without unplanned downtime.
Technical Specifications
- Part Number: 330173-10-18-10-02-00
- Brand: Bently Nevada (Baker Hughes)
- Series: 3300 XL 8mm Proximity Transducer System
- Probe Cable Length: 1.0 m (10 = 1.0 m extension cable)
- Extension Cable Length: 1.8 m (18 = 1.8 m)
- Driver/Proximitor: 3300 XL Proximitor® Sensor
- Sensing Range: 0–2.0 mm (linear range)
- Output Signal: –24 VDC nominal, –200 mV/mil (–7.87 V/mm)
- Frequency Response: DC to 10,000 Hz
- Operating Temperature: –35 °C to +121 °C (probe); –35 °C to +66 °C (driver)
- Target Material: AISI 4140 steel or equivalent
- Approvals: CE, ATEX, FM, CSA
- Weight: ~220 g (complete system)
Compatible Replacement & Equivalent Models
The following models are commonly evaluated as replacements or equivalents for the 330173-10-18-10-02-00. Always verify electrical and mechanical compatibility before substitution:
- Bently Nevada 330130-040-00-00 – 3300 XL 8mm standard probe, shorter cable configuration
- Bently Nevada 330180-X1-05 – 3300 XL 5mm proximity system, reduced gap range
- Epro PR6423/010-031 – 8mm eddy-current probe, compatible output signal (–7.87 V/mm), widely used as a drop-in equivalent
- Epro PR6424/010-031 – 8mm probe with extended temperature rating, suitable for high-heat environments
- Metrix ST5484E – Proximity transducer with 4–20 mA output option; requires signal conditioning review
- Emerson CSI 330173 series – Post-acquisition rebranded equivalents; confirm firmware compatibility with existing monitors
⚠ Note: Replacement selection must account for gap voltage, sensitivity, cable length, and monitor compatibility. Contact our engineers for a free compatibility check.
Why Choose the Original Model
- Factory-calibrated sensitivity: –7.87 V/mm ±0.1% ensures direct integration with 3500/3300 series monitors without recalibration
- Certified hazardous-area ratings: ATEX Zone 1 & FM Class I Div 1 approvals for petrochemical and offshore environments
- Proven MTBF: >100,000 hours in continuous operation per Bently Nevada qualification testing
- Full traceability: Genuine units ship with certificate of conformance and factory test data
- Warranty: 12-month manufacturer warranty on new units sourced through authorized channels
Typical Applications
- Radial vibration monitoring on steam and gas turbines
- Axial position (thrust) measurement on compressors
- Shaft eccentricity monitoring on large motors and generators
- Differential expansion measurement in power generation plants
- Keyphasor® reference signal acquisition
- Petrochemical plant rotating equipment protection systems
System Compatibility
The 330173-10-18-10-02-00 is designed to operate within the following Bently Nevada monitoring platforms:
- 3500 Series Machinery Protection System – Direct plug-in; no adapter required
- 3300 Series Monitoring System – Native compatibility
- System 1® Software – Full data integration for trend analysis and alarm management
- Orbit 60 Series – Compatible via standard BNC/terminal input modules
- Third-party DCS/PLC systems – Analog output (–24 VDC) interfaces with most 4–20 mA or voltage-input cards via signal conditioner
Selection Guide
Use the table below to identify the correct 330173 variant for your application:
- Probe tip diameter: 8 mm → 330173 series (vs. 5 mm → 330180 series)
- Extension cable length: 18 = 1.8 m | 05 = 0.5 m | 10 = 1.0 m | 30 = 3.0 m
- Probe cable length: 10 = 1.0 m | 05 = 0.5 m
- Driver type: 02 = standard 3300 XL Proximitor | 00 = no driver (probe only)
- Target material: Standard = AISI 4140; for stainless steel targets, specify -SS suffix variants
- Hazardous area: Confirm ATEX/FM approval code matches your zone classification
Not sure which variant fits your system? Email our engineers with your monitor model number and we will confirm the correct part.
Quality Assurance & Sourcing
- Source: Authorized distributor stock and certified surplus channels
- Inspection: Every unit undergoes visual, dimensional, and functional verification before shipment
- Documentation: Certificate of conformance, test report, and original packaging available on request
- Anti-counterfeit: Holographic labels and serial number verification against Bently Nevada/Baker Hughes database
- Lead time: In-stock units ship within 1–3 business days; sourced units 5–15 business days
How to Order
- Confirm part number: 330173-10-18-10-02-00
- Specify quantity and required documentation (CoC, test report, etc.)
- Submit inquiry via support@konmask.com or call +0086 19859288691
- Receive quotation within 2 business hours (Mon–Fri, UTC+8)
- Confirm order and arrange payment; shipment dispatched with full tracking
Replacement & Compatibility FAQ
Q: Can I use an Epro PR6423 as a direct replacement for the 330173-10-18-10-02-00?
A: In most cases yes — the PR6423 shares the same 8mm tip, –7.87 V/mm sensitivity, and –24 VDC supply. However, you must verify the extension cable connector type and confirm your monitor accepts the Epro driver. Contact us for a detailed compatibility report.
Q: Is the 330173-10-18-10-02-00 still in production?
A: Bently Nevada (Baker Hughes) continues to manufacture the 3300 XL series. Konmask.com maintains stock of both new and certified surplus units.
Q: What is the difference between the 330173 and 330130 series?
A: The 330173 is a complete transducer system (probe + extension cable + Proximitor driver), while the 330130 is a probe-only component. The 330173 part number encodes cable lengths and driver type in its suffix digits.
Q: Can this transducer connect to a Siemens or ABB DCS?
A: Yes. The –24 VDC analog output can interface with third-party DCS/PLC analog input cards, typically via a signal conditioner to convert to 4–20 mA. We can recommend compatible signal conditioners.
Q: Do you provide calibration certificates?
A: Yes. Factory calibration certificates are available for new units. For surplus units, we offer third-party calibration services upon request.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691





