Bently Nevada 330104-08-21-10-02-00 – Eddy Current Proximity Transducer System | 3300 XL Series
Engineering Background
The Bently Nevada 3300 XL Series represents the industry benchmark for non-contact vibration and position measurement in rotating machinery protection systems. Engineered for continuous operation in harsh industrial environments, this proximity transducer system delivers the signal fidelity and long-term stability demanded by API 670-compliant machinery protection applications.
Product Positioning
The 330104-08-21-10-02-00 is a complete eddy current proximity transducer system comprising an 8mm probe, 5-metre extension cable, and compatible driver/proximitor. It is the preferred solution for OEM turbomachinery builders, EPC contractors, and plant reliability engineers requiring certified, drop-in-compatible replacement components for existing Bently Nevada 3300 XL installations.
Complete Technical Specifications
| Parameter | Specification |
|---|---|
| Part Number | 330104-08-21-10-02-00 |
| Series | Bently Nevada 3300 XL |
| Probe Diameter | 8 mm |
| Extension Cable Length | 5 m (16.4 ft) |
| Measurement Range | 0.25 mm – 2.25 mm (10 – 90 mil) |
| Scale Factor | 7.87 V/mm (200 mV/mil) |
| Frequency Response | DC – 10,000 Hz (–3 dB) |
| Supply Voltage | –24 VDC (nominal) |
| Output Signal | –2 VDC to –18 VDC |
| Temperature Range (Probe) | –35°C to +177°C (–31°F to +351°F) |
| Temperature Range (Driver) | –35°C to +85°C (–31°F to +185°F) |
| Ingress Protection | IP67 (probe tip) |
| Connector Type | Integral coaxial, reverse-polarity protected |
| Compliance | API 670, CE, CSA, ATEX (Zone 1/2) |
| Weight | Approx. 80 g (probe + cable assembly) |
| Country of Origin | United States |
Proven Application Environments
- Steam and gas turbine radial/axial vibration monitoring
- Centrifugal compressor shaft displacement measurement
- Pump and motor bearing clearance monitoring
- Gearbox and expander rotor position sensing
- API 670 machinery protection systems (MPS)
- Petrochemical, LNG, power generation, and offshore platforms
Engineering Advantages
- Drop-in Compatibility: Direct replacement for existing 3300 XL installations — no recalibration of the proximitor required when replacing like-for-like.
- Extended Frequency Response: DC to 10 kHz bandwidth captures sub-synchronous, synchronous, and high-frequency vibration components critical for advanced diagnostics.
- High-Temperature Probe: Rated to +177°C, suitable for hot-section turbine bearing pedestals without additional thermal isolation.
- Robust Coaxial Assembly: Armoured extension cable with stainless-steel conduit fittings resists mechanical damage and EMI in congested machinery spaces.
- Certified for Hazardous Areas: ATEX Zone 1/2 and CSA approvals support installation in classified areas without additional barriers in most configurations.
System Architecture & Signal Flow
The 330104-08-21-10-02-00 operates as a three-component eddy current system:
- Probe (330104 series): Generates a high-frequency electromagnetic field at the probe tip. Eddy currents induced in the target shaft attenuate the field proportionally to gap distance.
- Extension Cable (330130 series): Transmits the RF signal between probe and driver with controlled impedance; the 5 m length is pre-matched to the driver calibration.
- Driver/Proximitor (3300 XL): Demodulates the RF signal and outputs a DC voltage proportional to gap (–2 V at 0.25 mm to –18 V at 2.25 mm), compatible with Bently Nevada 3500 series rack monitors and third-party DCS/PLC inputs.
Note: The driver/proximitor module must be ordered separately unless specified as a complete kit. Confirm system configuration with your procurement engineer before ordering.
Sourcing & Quality Verification
- All units sourced from authorised distributors or verified surplus channels with full traceability documentation.
- Each assembly undergoes incoming inspection: visual, dimensional, and functional verification against OEM datasheet parameters.
- Serialisation and date-code records retained for audit purposes.
- Certificate of Conformance (CoC) available upon request; third-party calibration reports available for select stock.
Procurement Process
- Submit your RFQ via support@konmask.com with quantity, required delivery date, and any certification requirements.
- Receive quotation with lead time, CoC availability, and shipping options within 1 business day.
- Confirm purchase order — payment via T/T, PayPal, or credit card accepted.
- Dispatch within 1–3 business days; DHL/FedEx express available for urgent requirements.
- Post-delivery technical support provided by Konmask engineering team.
Technical FAQ
Q: Is this a genuine Bently Nevada part or a compatible replacement?
A: We supply genuine Bently Nevada OEM parts. All units are traceable to authorised distribution channels. Counterfeit or clone products are never stocked.
Q: Can I use this probe with a 3500/40M or 3500/42M monitor?
A: Yes. The 3300 XL probe system is fully compatible with the Bently Nevada 3500 series rack monitors when used with the appropriate 3300 XL driver. Verify the driver part number matches your monitor channel configuration.
Q: What target material is required?
A: The standard calibration is for AISI 4140 steel. For non-standard target materials (stainless steel, titanium, Inconel), a material correction factor must be applied — contact our engineering team for guidance.
Q: Do you provide installation and commissioning support?
A: Yes. Konmask provides remote technical support for installation, gap setting, and system verification. On-site support can be arranged for large-scale projects.
Q: What is the warranty policy?
A: All products carry a minimum 90-day warranty against defects in materials and workmanship. Extended warranty options are available — enquire at time of purchase.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






