Bently Nevada 330104-09-15-05-02-00 – Eddy Current Proximity Transducer System | 3300 XL Series
Engineering Background: The Bently Nevada 3300 XL Proximity Transducer System is the industry benchmark for non-contact shaft vibration and position measurement in rotating machinery. Engineered to API 670 standards, this system delivers continuous, real-time displacement data critical for turbine, compressor, and pump protection in process-critical environments.
Product Positioning: Part number 330104-09-15-05-02-00 is a complete eddy current transducer system comprising a probe, extension cable, and Proximitor® sensor. It is designed for procurement engineers and reliability teams requiring a drop-in replacement or new installation within existing Bently Nevada 3300 XL monitoring infrastructure.
Complete Technical Specifications
- Part Number: 330104-09-15-05-02-00
- Series / Platform: Bently Nevada 3300 XL Proximity Transducer System
- Probe Tip Diameter: 9 mm (standard eddy current probe)
- Probe Cable Length: 5 m (integral cable)
- Extension Cable Length: 5 m
- Proximitor® Sensor Supply Voltage: –24 VDC (nominal)
- Output Voltage Range: –1 VDC to –21 VDC
- Scale Factor: 200 mV/mil (7.87 V/mm)
- Linear Range: 0.25 mm to 2.25 mm (10 mil to 90 mil)
- Frequency Response: DC to 10,000 Hz (–3 dB)
- Target Material: AISI 4140 steel (standard); other alloys available
- Operating Temperature (Probe): –35°C to +177°C
- Operating Temperature (Proximitor): –35°C to +85°C
- Ingress Protection: IP66 (Proximitor enclosure)
- Approvals: CE, FM, CSA, ATEX (Zone 1/2), IECEx
- Connector Type: MIL-C-5015 (probe side); BNC (Proximitor output)
- Weight: Approx. 40 g (probe assembly)
- Country of Origin: United States
Proven Application Environments
- Steam and gas turbine shaft radial vibration monitoring
- Centrifugal and reciprocating compressor rotor position measurement
- Pump and motor bearing displacement surveillance
- Gearbox and expander axial position monitoring
- Petrochemical, LNG, power generation, and offshore platforms
- API 670-compliant machinery protection systems
Engineering Advantages
- Non-contact measurement: Zero mechanical wear; suitable for continuous 24/7 operation
- High linearity: ±1% linearity across full measurement range ensures accurate displacement data
- Wide temperature range: Probe rated to +177°C for high-temperature turbine casings
- Hazardous area certified: ATEX/IECEx Zone 1 approval for use in explosive atmospheres
- Direct system compatibility: Plug-and-play with Bently Nevada 3300, 3500, and System 1 monitoring platforms
- Calibrated as a matched system: Probe, cable, and Proximitor shipped and calibrated together for guaranteed scale factor accuracy
System Architecture & Signal Flow
The 330104-09-15-05-02-00 operates as a three-component eddy current system:
- Probe (330104): Generates a high-frequency electromagnetic field (1.0 MHz nominal). As the conductive target (shaft) moves within the field, eddy currents are induced, altering the probe’s impedance.
- Extension Cable (330130-XX-XX): Transmits the RF signal from probe to Proximitor with minimal signal loss. Length is matched to system calibration.
- Proximitor® Sensor (330180-X1-CN): Demodulates the RF signal and outputs a DC voltage proportional to the gap distance. Output feeds directly to Bently Nevada 3300/3500 monitor input cards.
Signal output: –1 VDC (near gap) to –21 VDC (far gap), linear across the 0.25–2.25 mm measurement range.
Sourcing & Quality Verification
- All units sourced from authorized distributors or verified surplus channels with full traceability
- Each system inspected for physical integrity, connector condition, and cable continuity prior to shipment
- Original Bently Nevada labeling, part number, and date codes preserved and verified
- Certificate of conformance (CoC) available upon request
- Functional test reports available for select inventory lots
Procurement Process
- Submit your RFQ via support@konmask.com or place order directly on this page
- Receive order confirmation and lead time within 1 business day
- Export documentation (commercial invoice, packing list, CoC) prepared for international shipments
- DHL / FedEx / UPS express shipping available worldwide; sea freight for bulk orders
- Payment: T/T bank transfer, PayPal, credit card accepted
Technical FAQ
Q: Is this a complete system or probe only?
A: This listing is for the complete matched system: probe (330104-09-15-05-02-00) + 5m extension cable + Proximitor® sensor, calibrated as a unit.
Q: Is it compatible with Bently Nevada 3500 monitors?
A: Yes. The 3300 XL system is fully compatible with 3500 series monitor input cards using the standard –24 VDC supply and BNC output interface.
Q: Can you supply calibration certificates?
A: Factory calibration data is embedded in the matched system. Third-party calibration certificates can be arranged upon request at additional cost.
Q: What is the lead time?
A: In-stock units ship within 2–3 business days. Out-of-stock items typically have a 2–4 week lead time. Contact us for current availability.
Q: Do you accept returns?
A: Yes, within 30 days of receipt for unused, uninstalled units in original condition. Please contact support before returning.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






