Bently Nevada 330104-10-20-10-02-00 – High-Precision Eddy-Current Proximity Transducer System | 3300 XL Series Platform
Engineering Background
The Bently Nevada 330104-10-20-10-02-00 is a complete eddy-current proximity transducer system engineered for continuous, non-contact measurement of shaft radial vibration, axial position (thrust), and differential expansion in rotating machinery. Developed under Bently Nevada’s industry-defining 3300 XL Series platform, this system delivers the measurement accuracy and long-term stability demanded by API 670-compliant machinery protection programs in power generation, oil & gas, petrochemical, and heavy industrial environments.
Procurement engineers and reliability teams worldwide specify the 330104 series as the primary sensing element in turbine, compressor, pump, and motor protection systems where unplanned downtime carries six-figure-per-hour cost exposure.
Product Positioning
This listing covers the complete transducer system — probe, extension cable, and proximitor/oscillator-demodulator — configured to the exact ordering code 330104-10-20-10-02-00. Each segment of the part number encodes a specific mechanical and electrical parameter, ensuring plug-and-play compatibility with existing 3300 XL monitor racks without field calibration.
Complete Technical Specifications
| Part Number | 330104-10-20-10-02-00 |
| Series / Platform | Bently Nevada 3300 XL Proximity Transducer System |
| Sensing Technology | Eddy-Current (Non-Contact) |
| Probe Thread Size | 8 mm (M8 × 1.0) |
| Probe Length | 10 mm (active tip to mounting shoulder) |
| Extension Cable Length | 2.0 m (standard) |
| Proximitor Cable Length | 1.0 m |
| Linear Range | 0.25 mm – 2.26 mm (10 mil – 90 mil) |
| Scale Factor (Sensitivity) | 7.87 V/mm (200 mV/mil) |
| Frequency Response | DC – 10,000 Hz (–3 dB) |
| Supply Voltage | –24 VDC (nominal), –20 VDC to –26 VDC |
| Output Signal | –2 VDC to –18 VDC (proportional to gap) |
| Temperature Range (Probe) | –35 °C to +177 °C (–31 °F to +351 °F) |
| Temperature Range (Proximitor) | –35 °C to +85 °C (–31 °F to +185 °F) |
| Target Material | AISI 4140 Steel (standard); other alloys with calibration |
| Connector Type | Integral coaxial, armored cable |
| Ingress Protection | IP67 (probe assembly) |
| Compliance | API 670, CE, RoHS |
| Weight | Approx. 80 g (probe + cable assembly) |
| Country of Origin | USA |
Proven Application Environments
- Steam & Gas Turbines — Shaft radial vibration and axial thrust monitoring per API 670 / ISO 10816
- Centrifugal Compressors — Rotor dynamic measurement in high-speed, high-pressure trains
- Pumps & Motors — Continuous bearing-journal orbit and eccentricity tracking
- Gearboxes — Gear mesh frequency analysis and differential expansion measurement
- Hydro Turbines — Low-speed shaft position and runout detection
- Reciprocating Compressors — Rider-band wear and crosshead displacement monitoring
Engineering Advantages
- Non-Contact Measurement — Zero mechanical wear; suitable for continuous 24/7 operation over multi-year intervals between turnarounds
- Wide Frequency Bandwidth (DC – 10 kHz) — Captures both slow-roll runout and high-frequency sub-synchronous instabilities in a single channel
- Factory-Matched System — Probe, cable, and proximitor are calibrated as a matched set; eliminates field calibration errors and ensures ±1% scale factor accuracy
- Robust Construction — Armored coaxial cable and IP67-rated probe withstand high-vibration, high-temperature, and chemically aggressive machinery environments
- Direct Rack Compatibility — Plug-compatible with Bently Nevada 3300, 3500, and System 1 monitor racks; no signal conditioning adapters required
- Long-Term Stability — Eddy-current technology is immune to optical contamination, pressure, and humidity variations that affect other sensing technologies
System Architecture & Signal Flow
The 330104-10-20-10-02-00 system operates on a three-component architecture:
- Probe (Sensor) — An 8 mm eddy-current probe generates a high-frequency electromagnetic field. As the conductive target (shaft) moves within the linear range, the field loading changes proportionally.
- Extension Cable — A precision-impedance coaxial cable (2.0 m) transmits the RF signal from the probe to the proximitor with minimal signal degradation. The cable is factory-matched to the probe to maintain system calibration.
- Proximitor / Oscillator-Demodulator — Converts the RF loading variation into a DC voltage output (–2 V to –18 V) linearly proportional to the probe-to-target gap. The output feeds directly into the monitor rack’s input card.
Signal output is a negative DC voltage: a more negative voltage indicates a smaller gap (shaft moving toward probe). This convention is consistent across all Bently Nevada 3300 XL and 3500 Series monitors.
Sourcing & Quality Verification
- All units sourced through authorized industrial distribution channels or verified surplus with full traceability documentation
- Each system undergoes incoming inspection: visual examination, connector integrity check, and output voltage verification against the published scale factor
- Serialization and date codes are verified against Bently Nevada manufacturing records where available
- Units are shipped in ESD-safe, anti-static packaging with desiccant to prevent moisture ingress during transit
- Certificate of Conformance (CoC) available upon request for critical applications
Procurement Process
- Confirm Part Number — Verify the full ordering code 330104-10-20-10-02-00 matches your existing system configuration (probe thread, cable lengths, connector type)
- Submit Inquiry or Order — Contact us via the product page, email, or phone with your required quantity and delivery timeline
- Lead Time & Availability — In-stock units ship within 1–3 business days; lead time for sourced units is communicated within 24 hours of inquiry
- Documentation — Datasheet, CoC, and test report provided with shipment upon request
- After-Sales Support — Technical support available for installation, commissioning, and compatibility questions
Technical FAQ
Q: Is the 330104-10-20-10-02-00 compatible with the Bently Nevada 3500 Series monitor rack?
A: Yes. The 3300 XL proximity transducer system is electrically compatible with 3500 Series input cards. Verify the monitor card’s input impedance and supply voltage specifications before installation.
Q: Can this transducer measure axial position (thrust) as well as radial vibration?
A: Yes. The 330104 series is suitable for both radial vibration and axial position measurement. The application is determined by probe mounting orientation, not the transducer model.
Q: What target materials are compatible?
A: The system is factory-calibrated for AISI 4140 steel. Other ferromagnetic and non-ferromagnetic alloys (e.g., Inconel, titanium) require a target material correction factor or field recalibration. Contact our technical team for alloy-specific scale factor data.
Q: Can the probe and proximitor be purchased separately?
A: The 330104-10-20-10-02-00 is a factory-matched system. Mixing unmatched components will degrade scale factor accuracy. If you require individual components, please contact us with your specific configuration requirements.
Q: What is the replacement interval for this transducer system?
A: Bently Nevada eddy-current systems are designed for continuous service. Replacement is typically driven by physical damage, connector degradation, or calibration drift detected during periodic verification — not a fixed time interval.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






