Vibration Monitoring Solution – Bently Nevada 330104-12-20-10-02-00 | 3300 XL Series
Where This Product Is Used
The Bently Nevada 330104-12-20-10-02-00 Proximity Transducer System is engineered for continuous, non-contact shaft vibration and position measurement in rotating machinery. Typical deployment environments include:
- Steam & Gas Turbines – radial shaft vibration monitoring per API 670
- Centrifugal Compressors – thrust position and differential expansion measurement
- Pumps & Fans – bearing journal orbit analysis and eccentricity monitoring
- Gearboxes – gear mesh frequency and shaft runout detection
- Petrochemical & Refinery Plants – continuous online machinery protection systems
- Power Generation Facilities – OEM-specified vibration transducer replacement
Technical Specifications
- Part Number: 330104-12-20-10-02-00
- Series: Bently Nevada 3300 XL
- Type: Eddy-Current Proximity Transducer System
- Probe Tip Diameter: 8 mm (standard)
- Cable Length: 12 in (probe) / 20 ft (extension)
- Sensitivity: 200 mV/mil (7.87 V/mm)
- Linear Range: 10–90 mil (0.25–2.29 mm)
- Frequency Response: 0–10,000 Hz (–3 dB)
- Operating Temperature: –35°C to +177°C (probe); –35°C to +66°C (driver)
- Supply Voltage: –24 VDC (nominal)
- Output: –1 to –17 VDC (linear range)
- Target Material: AISI 4140 steel (standard); other alloys available
- Connector: 2-pin MIL-C-5015 (probe); integral cable (extension)
- Weight: ~80 g (probe assembly)
- Approvals: CE, FM, CSA (see compliance section)
Why Engineers Specify This Model
- Drop-in OEM Replacement – 100% pin-compatible with existing 3300 XL installations; no recalibration of the monitoring rack required
- Extended Temperature Range – probe rated to 177°C, suitable for hot-section turbine bearing pedestals
- High Signal Integrity – matched probe/extension/driver system eliminates impedance mismatch errors common with mixed-brand assemblies
- API 670 Compliant – meets the machinery protection standard required by most EPC contractors and end-users
- Long Service Life – non-contact measurement principle eliminates mechanical wear; MTBF >100,000 hours in field service
- Broad Target Compatibility – factory-calibrated for AISI 4140; recalibration curves available for Inconel, titanium, and other alloys
Complete System Bill of Materials
The 330104-12-20-10-02-00 is a complete matched system comprising:
- 330104 Series 8 mm Proximity Probe (12 in armored cable)
- 330130 Extension Cable (20 ft)
- 330180 Proximitor® Driver/Oscillator
- Mounting hardware & connector kit
Compatible monitoring modules: 3300/16, 3500/42, 3500/42M, 3500/44, 3500/45, 3500/46.
Compliance & Industry Standards
- API 670 (Machinery Protection Systems) – 5th Edition
- IEC 61508 (Functional Safety) – SIL 2 capable when used with certified monitor
- ATEX / IECEx – Zone 1 & Zone 2 hazardous area rated (confirm suffix code)
- CE Marking – EMC Directive 2014/30/EU
- FM & CSA – North American hazardous location approvals
- RoHS Compliant
Quality Assurance & Sourcing
Every Bently Nevada 330104-12-20-10-02-00 unit supplied by Konmask.com undergoes the following before shipment:
- Visual inspection against OEM cosmetic standards
- Functional verification: output voltage linearity check across full linear range
- Matched-system impedance verification (probe + extension + driver)
- Traceability documentation: lot number, date code, and test report provided on request
We source exclusively from authorized distributors and verified surplus channels with documented chain of custody. Counterfeit-risk screening is applied to all Bently Nevada inventory.
How to Source This Part
- In Stock: Ships within 1–3 business days from our warehouse
- Lead Time (new order): 4–8 weeks for factory-fresh units
- Minimum Order: 1 unit
- Export: Available for international shipment; export license may apply for certain destinations
- RFQ for volume pricing: Contact support@konmask.com or call +0086 19859288691
Application-Specific FAQ
Q: Can I use this probe with a 3500 series monitor rack?
A: Yes. The 330104 probe family is fully compatible with 3500/42, 3500/42M, 3500/44, 3500/45, and 3500/46 vibration monitor modules when used with the matching Proximitor driver.
Q: What is the difference between the -02-00 and -00-00 suffix?
A: The suffix encodes connector type and approval options. -02-00 indicates a standard 2-pin MIL connector with no special approvals suffix. Confirm your existing installation suffix before ordering to ensure connector compatibility.
Q: Is recalibration required after replacing the probe?
A: No rack recalibration is required when replacing with an identical matched system (same part number). The 3300 XL system is factory-calibrated as a matched set. If the target material differs from AISI 4140, a scale factor adjustment in the monitor may be needed.
Q: Can this transducer be used in a hazardous (classified) area?
A: Yes, subject to the approval suffix on the part number. The 330104 series carries ATEX/IECEx Zone 1 & 2 ratings and FM/CSA approvals for North American Class I, Division 1 & 2 locations. Verify the approval suffix matches your area classification.
Q: What is the recommended gap voltage for initial setup?
A: The nominal gap voltage is –10.0 VDC (corresponding to the midpoint of the linear range, approximately 50 mil / 1.27 mm gap). Adjust per the system calibration sheet supplied with the unit.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






