Bently Nevada 330104-15-22-10-02-00 Proximity Transducer System | 3300 XL Series
Engineering Background
The Bently Nevada 3300 XL Series represents the industry benchmark for non-contact eddy-current proximity measurement in rotating machinery protection and condition monitoring. Developed by Baker Hughes (Bently Nevada), this platform is deployed globally in turbines, compressors, pumps, and generators where continuous shaft vibration and position data are mission-critical.
Product Positioning
The 330104-15-22-10-02-00 is a complete proximity transducer system comprising a matched probe, extension cable, and Proximitor® sensor. It is engineered for direct integration with Bently Nevada 3500 Series rack systems and compatible monitors, delivering calibrated output for radial vibration, axial position, and differential expansion measurements in demanding industrial environments.
Complete Technical Specifications
| Part Number | 330104-15-22-10-02-00 |
| Series / Platform | Bently Nevada 3300 XL |
| Probe Tip Diameter | 8 mm (5/16 in) |
| Probe Length | 15 mm |
| Extension Cable Length | 5 m (16.4 ft) |
| Proximitor® Cable Length | 2.5 m (8.2 ft) |
| Linear Range | 0.25 – 2.26 mm (10 – 89 mil) |
| Scale Factor | 7.87 V/mm (200 mV/mil) |
| Frequency Response | DC – 10,000 Hz |
| Supply Voltage | -24 VDC (nominal) |
| Output Voltage Range | -1 to -21 VDC |
| Target Material | AISI 4140 Steel (standard) |
| Operating Temperature | -35°C to +85°C (probe); -35°C to +65°C (Proximitor®) |
| Connector Type | Armor-jacketed coaxial, TNC |
| Approvals | CE, ATEX, FM, CSA (intrinsically safe options available) |
| Weight | Approx. 40 g (probe assembly) |
| Country of Origin | USA |
Proven Application Environments
- Steam & Gas Turbines — Radial shaft vibration and thrust position monitoring per API 670
- Centrifugal Compressors — Continuous rotor dynamic surveillance in petrochemical and LNG plants
- Pumps & Fans — Early-warning imbalance and misalignment detection
- Electric Motors & Generators — Shaft orbit and differential expansion measurement
- Gearboxes — Gear mesh frequency analysis and bearing clearance monitoring
- Marine & Offshore Platforms — Harsh-environment rotating equipment protection
Engineering Advantages
- Factory-Matched System — Probe, cable, and Proximitor® are calibrated as a matched set, eliminating field calibration errors
- High Bandwidth — DC to 10 kHz response captures sub-synchronous, synchronous, and high-frequency vibration components
- Robust Construction — Armor-jacketed cable and stainless-steel probe body withstand high-vibration, high-temperature, and chemically aggressive environments
- API 670 Compliant — Meets the international standard for machinery protection systems
- Direct 3500 Rack Compatibility — Plug-and-play integration with Bently Nevada 3500/40M, 3500/42M, and 3500/46M monitor modules
- Long-Term Availability — Supported by Baker Hughes global service network with documented obsolescence roadmap
System Architecture & Signal Flow
The 330104-15-22-10-02-00 operates on the eddy-current principle. The probe tip generates a high-frequency electromagnetic field; as a conductive target (shaft) enters the field, eddy currents are induced, altering the probe’s impedance. The Proximitor® sensor converts this impedance change into a calibrated DC voltage proportional to the gap distance. The signal is then routed to the 3500 Series monitor rack for alarm processing, trending, and relay output.
Signal Chain: Probe Tip → Coaxial Extension Cable → Proximitor® Sensor → 3500 Monitor Input → DCS / Safety System
Sourcing & Quality Verification
- All units sourced from authorized distributors or verified surplus channels with full traceability documentation
- Pre-shipment inspection includes visual examination, connector integrity check, and impedance verification
- Original Baker Hughes / Bently Nevada labeling and serial numbers preserved
- Certificate of Conformance (CoC) available upon request
- 30-day functional warranty on all verified units
Procurement Process
- Confirm Part Number — Verify 330104-15-22-10-02-00 against your system BOM or existing Proximitor® label
- Request Quote — Contact support@konmask.com for volume pricing and lead time
- Order & Payment — Secure checkout via Konmask.com; T/T, PayPal, and credit card accepted
- Shipping — DHL / FedEx express worldwide; export documentation included
- Incoming Inspection — Use provided CoC and serial number to verify authenticity upon receipt
Technical FAQ
Q: Is this a complete system or just the probe?
A: This listing covers the complete matched system: 8 mm probe (15 mm body), 5 m extension cable, and Proximitor® sensor — ready for installation.
Q: Which Bently Nevada monitors is this compatible with?
A: Compatible with 3500/40M, 3500/42M, 3500/46M, and legacy 7200 Series monitors. Confirm your monitor’s input impedance specification before installation.
Q: Can this be used with non-steel targets?
A: The standard calibration is for AISI 4140 steel. For other target materials (Inconel, titanium, etc.), a material correction factor must be applied — contact our engineering team for guidance.
Q: What is the lead time?
A: In-stock units ship within 1–3 business days. For large quantities, contact us for availability confirmation.
Q: Do you provide installation support?
A: Yes. Our technical team can provide wiring diagrams, gap-setting procedures, and integration guidance for the 3500 rack system.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






