Bently Nevada 330703-000-178-10-02-00 Proximity Probe | Replacement, Equivalent & Selection Guide
The Bently Nevada 330703-000-178-10-02-00 is an 8 mm eddy-current proximity probe from the industry-standard 3300 XL Series, designed for continuous shaft vibration, position, and eccentricity monitoring on rotating machinery. This page provides full technical specifications, compatible replacement options, application guidance, and sourcing information to help engineers and procurement teams make the right selection.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 330703-000-178-10-02-00 |
| Brand | Bently Nevada (Baker Hughes) |
| Series | 3300 XL 8 mm Proximity Transducer System |
| Probe Tip Diameter | 8 mm |
| Cable Length | 5 m (178 in extension cable) |
| Connector Type | 10-32 UNF coaxial |
| Sensitivity | 7.87 V/mm (200 mV/mil) |
| Linear Range | 0.25 – 2.54 mm (10 – 100 mil) |
| Operating Temperature | -35 °C to +177 °C |
| Supply Voltage | -24 VDC (nominal) |
| Output Impedance | 100 Ω |
| Target Material | AISI 4140 steel (standard) |
| Approvals | CE, ATEX, IECEx (consult datasheet) |
| Weight | ~200 g (probe + cable assembly) |
Compatible Replacement & Equivalent Models
The following models are commonly evaluated as replacements or equivalents for the 330703-000-178-10-02-00. Always verify electrical and mechanical compatibility before substitution.
| Part Number | Brand | Notes |
|---|---|---|
| 330703-000-060-10-02-00 | Bently Nevada | Same probe, 1.5 m (60 in) cable — shorter cable variant |
| 330703-000-090-10-02-00 | Bently Nevada | Same probe, 2.3 m (90 in) cable variant |
| 330703-000-305-10-02-00 | Bently Nevada | Same probe, 7.75 m (305 in) cable variant |
| 330780-50-00 | Bently Nevada | 3300 XL 8 mm standard probe, alternative assembly |
| PR6423/010-030 | Epro (Baker Hughes) | 8 mm eddy-current probe, compatible driver required |
| CS-1 / CS-3 | Metrix (Roper Technologies) | Functional equivalent; verify driver compatibility |
| TQ-series 8 mm | Wilcoxon / Amphenol | Third-party equivalent; confirm system calibration |
⚠ Disclaimer: Third-party equivalents require system-level validation. Konmask.com recommends using OEM parts for safety-critical applications.
Why Choose the Original Model
- Factory-calibrated to Bently Nevada 3300 XL driver/monitor systems — no field recalibration needed.
- Certified compatibility with System 1 software and 3500 Series monitoring racks.
- Proven reliability in API 670-compliant machinery protection systems.
- Full traceability: OEM documentation, certificates of conformance, and warranty support.
- Long-term availability through authorized distribution channels.
Typical Applications
- Steam and gas turbine shaft radial vibration monitoring
- Centrifugal compressor rotor position measurement
- Pump and motor eccentricity and axial position sensing
- Gearbox and expander differential expansion monitoring
- API 670 machinery protection systems in oil & gas, petrochemical, and power generation plants
System Compatibility
The 330703-000-178-10-02-00 probe is designed to operate within the Bently Nevada 3300 XL Proximity Transducer System, which includes:
- Extension Cable: 330130-series (matched to probe cable length)
- Driver/Oscillator: 330180-X1-00 or 330190-series
- Monitor Rack: 3500/40M, 3500/42M, 3500/45, 3500/46M
- Software: System 1 Evolution, System 1 Optimizer+
Confirm total cable length (probe cable + extension cable) does not exceed system specification (typically 9 m or 305 in total).
Selection Guide
Use the table below to select the correct 330703 variant based on your installation requirements:
| Cable Length | Part Number Suffix | Full Part Number |
|---|---|---|
| 1.5 m (60 in) | -060- | 330703-000-060-10-02-00 |
| 2.3 m (90 in) | -090- | 330703-000-090-10-02-00 |
| 4.5 m (178 in) | -178- | 330703-000-178-10-02-00 ✓ (this item) |
| 7.75 m (305 in) | -305- | 330703-000-305-10-02-00 |
Tip: The suffix -10-02-00 denotes standard connector, standard temperature range, and no special options. Contact us if your application requires high-temperature or intrinsically safe variants.
Quality Assurance & Sourcing
- All units sourced through verified industrial supply channels with full documentation.
- Each shipment includes a Certificate of Conformance and original manufacturer packaging where available.
- Konmask.com performs incoming inspection on all proximity probe assemblies.
- Surplus/refurbished units are clearly labeled and priced separately from new stock.
- Export compliance: ECCN EAR99 (verify for your destination country).
How to Order
- Confirm the part number: 330703-000-178-10-02-00
- Specify quantity and required delivery timeline.
- Add to cart or contact us for bulk pricing and lead-time confirmation.
- For urgent requirements, email support@konmask.com with your PO details.
- International orders: provide HS code destination country for customs documentation.
Replacement & Compatibility FAQ
Q: Can I use a 330703-000-060-10-02-00 probe with a 330703-000-178-10-02-00 extension cable?
A: Yes, provided the total cable length remains within the system specification. Always verify with the driver datasheet.
Q: Is the 330703-000-178-10-02-00 compatible with older 3300 Series (non-XL) monitors?
A: The 3300 XL probe is backward-compatible with most 3300 Series monitors, but sensitivity calibration should be verified. Consult Bently Nevada TIL documentation.
Q: Can third-party 8 mm probes replace this unit?
A: Functionally possible in some cases, but OEM certification and system calibration must be re-validated. Not recommended for API 670 safety-critical loops without engineering review.
Q: What is the lead time for the 330703-000-178-10-02-00?
A: In-stock units ship within 1–3 business days. Contact us for current availability.
Q: Do you provide a warranty?
A: Yes — 12-month warranty on new OEM units. Surplus units carry a 90-day functional warranty.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691


