Bently Nevada 330901-00-08-05-02-05 Proximity Transducer System – 3300 XL Series
Imagine a high-speed turbine or critical centrifugal compressor running without reliable shaft vibration feedback. Within hours — or even minutes — undetected rotor imbalance, misalignment, or bearing wear can escalate into catastrophic mechanical failure, unplanned downtime, and six-figure repair costs. In rotating machinery protection, there is no acceptable substitute for a precision proximity transducer system. The Bently Nevada 330901-00-08-05-02-05 is engineered precisely to prevent that scenario.
The 330901-00-08-05-02-05 is a complete proximity transducer system within Bently Nevada’s industry-defining 3300 XL Series — the global benchmark for eddy-current-based shaft sensing in turbomachinery. This specific configuration (8 mm probe, 5 m extension cable, 5 m integral cable, standard driver) is one of the most widely deployed variants across power generation, oil & gas, and petrochemical facilities worldwide. It integrates seamlessly with Bently Nevada 3500 Series rack-based monitoring systems and is fully compliant with API 670 machinery protection standards.
Technical Specifications
- Part Number / SKU: 330901-00-08-05-02-05
- Brand: Bently Nevada (Baker Hughes)
- Series: 3300 XL Proximity Transducer System
- Probe Diameter: 8 mm
- Extension Cable Length: 5 m
- Integral Cable Length: 5 m
- Driver Type: Standard (non-intrinsically safe)
- Sensing Technology: Eddy-current (non-contact)
- Output Signal: -24 VDC nominal bias voltage; linear voltage output proportional to gap
- Frequency Range: DC to 10,000 Hz
- Temperature Range (Probe): -35°C to +177°C (-31°F to +350°F)
- Compliance: API 670, CE, ATEX (consult datasheet for zone classification)
- Weight: Approx. 320 g
Key Features & Benefits
- Non-Contact Measurement: Eddy-current technology eliminates mechanical wear, ensuring decades of maintenance-free operation in harsh environments.
- High-Frequency Response: DC to 10 kHz bandwidth captures both slow-roll runout and high-frequency vibration events critical for early fault detection.
- API 670 Compliant: Meets the most stringent international standard for machinery protection systems, required by major EPC contractors and end-users globally.
- Plug-and-Play with 3500 Rack: Factory-calibrated and matched as a system — probe, extension cable, and driver are tuned together for guaranteed accuracy without field calibration.
- Robust Construction: Stainless steel probe body and armored cable withstand high temperatures, aggressive process fluids, and mechanical vibration.
- Wide Target Material Compatibility: Optimized for AISI 4140 steel shafts; calibration curves available for other alloys.
Industry & Equipment Applications
- Power Generation: Steam turbines, gas turbines, hydro generators — shaft radial vibration and axial position monitoring.
- Oil & Gas: Centrifugal compressors, expanders, and pipeline pumps in upstream, midstream, and downstream facilities.
- Petrochemical & Refining: Reactor charge pumps, cracked gas compressors, and critical agitators.
- Marine & Offshore: Propulsion turbines and auxiliary rotating equipment on FPSOs and offshore platforms.
- Pulp & Paper / Steel: High-speed rolls, ID fans, and induced draft fans requiring continuous vibration surveillance.
System Integration & Compatible Parts
The 330901-00-08-05-02-05 is designed to operate as part of a complete Bently Nevada machinery protection ecosystem. Compatible and commonly paired components include:
- Monitors: Bently Nevada 3500/42M Proximitor / Seismic Monitor, 3500/40M Proximitor Monitor
- Rack Systems: Bently Nevada 3500 Rack (3500/01, 3500/05, 3500/15, 3500/22M)
- Extension Cables: 330130 Series (alternative lengths)
- Drivers / Proximitors: 3300 XL 8 mm Proximitor (330180 Series)
- Keyphasor Modules: 3500/25 for phase reference in balancing and ODS analysis
- DCS Integration: 4–20 mA output modules for integration with Honeywell, Emerson DeltaV, Yokogawa CENTUM, and ABB 800xA systems
Our Quality Assurance Process
At Konmask.com, every Bently Nevada 330901-00-08-05-02-05 unit undergoes a rigorous multi-stage inspection before shipment:
- Authenticity Verification: Cross-referenced against manufacturer serial number databases and original packaging inspection.
- Visual & Mechanical Inspection: Probe tip, cable jacket, connector pins, and driver housing checked for damage or tampering.
- Functional Bench Test: Gap vs. output voltage linearity verified against factory calibration curves using calibrated test equipment.
- Documentation Package: Each unit ships with a certificate of conformance and, where available, original factory test records.
- Secure Packaging: ESD-safe, anti-vibration packaging with moisture desiccant for international freight.
How to Order
- Submit your inquiry via the Contact Us form or email support@konmask.com with your required quantity and delivery timeline.
- Our technical team will confirm part availability, lead time, and provide a formal quotation within 24 business hours.
- Upon PO receipt, we arrange quality inspection, documentation, and international freight (DHL / FedEx / sea freight as required).
- Track your shipment with our dedicated logistics update service.
Why Choose Konmask.com?
- Industrial Automation Specialists: We focus exclusively on PLC, DCS, and condition monitoring components — not a generalist distributor.
- Global B2B Supply: Serving engineering firms, EPCs, and plant maintenance teams across 40+ countries.
- Technical Pre-Sales Support: Our engineers can assist with system compatibility, cable length selection, and driver matching.
- Competitive Lead Times: Extensive network of verified suppliers enables fast sourcing of both current and legacy Bently Nevada parts.
- Transparent Documentation: Full traceability from source to delivery — no grey-market ambiguity.
Frequently Asked Questions
Q: Is the 330901-00-08-05-02-05 compatible with the Bently Nevada 3500 monitoring rack?
A: Yes. The 3300 XL 8 mm proximity transducer system is the standard sensor input for Bently Nevada 3500 Series monitors including the 3500/40M and 3500/42M. The system is factory-calibrated as a matched set.
Q: What is the difference between the 330901 and 330180 part number families?
A: The 330901 designates the complete proximity transducer system (probe + extension cable + driver as a matched assembly), while the 330180 refers to the standalone Proximitor driver module. For a complete installation, the 330901 system is the recommended procurement unit.
Q: Can this transducer be used on non-steel shafts?
A: The standard calibration is optimized for AISI 4140 steel. For other target materials (e.g., titanium, Inconel, stainless steel), a material-specific calibration curve must be applied. Contact our technical team for guidance.
Q: Do you supply the 330901-00-08-05-02-05 with a certificate of conformance?
A: Yes. All units supplied by Konmask.com include a certificate of conformance. Factory test records are provided where available from the supply chain.
Q: What is the typical lead time for this part?
A: Lead time varies by current stock levels. Please contact us at support@konmask.com for real-time availability. Urgent requirements can often be accommodated via expedited sourcing.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
{
“@context”: “https://schema.org”,
“@graph”: [
{
“@type”: “Product”,
“name”: “Bently Nevada 330901-00-08-05-02-05 Proximity Transducer System”,
“description”: “Bently Nevada 330901-00-08-05-02-05 is a complete 3300 XL Series proximity transducer system for shaft vibration and position monitoring. API 670 compliant, compatible with Bently Nevada 3500 rack systems.”,
“sku”: “330901-00-08-05-02-05”,
“mpn”: “330901-00-08-05-02-05”,
“brand”: {
“@type”: “Brand”,
“name”: “Bently Nevada”
},
“manufacturer”: {
“@type”: “Organization”,
“name”: “Bently Nevada (Baker Hughes)”
},
“category”: “Proximity Transducer System”,
“url”: “https://konmask.com/products/bently-nevada-330901-00-08-05-02-05-proximity-transducer-system-3300-series”,
“offers”: {
“@type”: “Offer”,
“url”: “https://konmask.com/products/bently-nevada-330901-00-08-05-02-05-proximity-transducer-system-3300-series”,
“priceCurrency”: “USD”,
“availability”: “https://schema.org/InStock”,
“seller”: {
“@type”: “Organization”,
“name”: “Konmask.com”
}
}
},
{
“@type”: “FAQPage”,
“mainEntity”: [
{
“@type”: “Question”,
“name”: “Is the 330901-00-08-05-02-05 compatible with the Bently Nevada 3500 monitoring rack?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Yes. The 3300 XL 8 mm proximity transducer system is the standard sensor input for Bently Nevada 3500 Series monitors including the 3500/40M and 3500/42M. The system is factory-calibrated as a matched set.”
}
},
{
“@type”: “Question”,
“name”: “What is the difference between the 330901 and 330180 part number families?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “The 330901 designates the complete proximity transducer system (probe + extension cable + driver as a matched assembly), while the 330180 refers to the standalone Proximitor driver module.”
}
},
{
“@type”: “Question”,
“name”: “Can this transducer be used on non-steel shafts?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “The standard calibration is optimized for AISI 4140 steel. For other target materials, a material-specific calibration curve must be applied.”
}
},
{
“@type”: “Question”,
“name”: “Do you supply the 330901-00-08-05-02-05 with a certificate of conformance?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Yes. All units supplied by Konmask.com include a certificate of conformance. Factory test records are provided where available.”
}
},
{
“@type”: “Question”,
“name”: “What is the typical lead time for this part?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Lead time varies by current stock levels. Please contact us at support@konmask.com for real-time availability.”
}
}
]
}
]
}
