Rotating Machinery Vibration Monitoring Solution – Bently Nevada 330903-00-16-05-01-00 | 3300 XL NSv Series
Where This Product Is Used
The Bently Nevada 330903-00-16-05-01-00 is a field-proven proximity transducer system engineered for continuous, non-contact measurement of shaft radial vibration, axial position, and differential expansion in critical rotating machinery. Engineers and reliability teams deploy this system across:
- Steam & Gas Turbines – Real-time shaft orbit and eccentricity monitoring to prevent catastrophic failure in power generation assets.
- Centrifugal & Axial Compressors – Continuous radial vibration surveillance in petrochemical, LNG, and refinery trains.
- Pumps & Fans – Early detection of rotor imbalance and bearing wear in process-critical rotating equipment.
- Gearboxes – Gear mesh frequency analysis and shaft position trending.
- Marine Propulsion Systems – Shaft monitoring in harsh, high-humidity environments.
- Nuclear & Thermal Power Plants – Safety-instrumented vibration loops requiring certified, traceable hardware.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 330903-00-16-05-01-00 |
| Series | 3300 XL NSv (Non-Standard Voltage) |
| Transducer Type | Eddy-Current Proximity Transducer |
| Probe Tip Diameter | 8 mm (standard) |
| Cable Length | 5 m (integral) |
| Extension Cable Length | 1 m |
| Total System Length | 16 ft (approx. 5 m probe + 1 m extension) |
| Output Voltage (Static) | –24 VDC nominal (NSv variant) |
| Scale Factor | 7.87 V/mm (200 mV/mil) |
| Linear Range | 0.25 – 2.25 mm (10 – 90 mil) |
| Frequency Response | DC to 10,000 Hz (–3 dB) |
| Temperature Range | –35°C to +177°C (probe); –35°C to +85°C (driver) |
| Target Material | AISI 4140 steel (standard); other alloys available |
| Connector | MIL-C-5015 style |
| Approvals | CE, FM, CSA, ATEX (consult datasheet for zone ratings) |
| Weight | 220 g (approx.) |
Why Engineers Specify This Model
- NSv (Non-Standard Voltage) Architecture – Designed for installations where standard –24 V bias is not available; integrates directly with legacy 3300 series monitors without rewiring.
- Proven API 670 Compliance – Meets the industry benchmark for machinery protection systems, accepted by EPC contractors and OEMs worldwide.
- Extended Temperature Tolerance – Probe rated to +177°C, suitable for hot-section turbine pedestals without additional thermal isolation.
- Plug-and-Play with 3300 XL Monitors – Factory-matched scale factor eliminates field calibration; reduces commissioning time by hours per measurement point.
- Long-Term Availability – Active Bently Nevada catalog part; replacement and spare stocking is straightforward for maintenance planners.
Complete System Bill of Materials
A complete 3300 XL NSv measurement loop typically includes:
- 330903-00-16-05-01-00 Proximity Transducer (this item)
- 330130-080-00-00 Extension Cable (if additional length required)
- 330180-X0-00 Proximitor® Driver / Signal Conditioner
- 3300/16 or 3500/42 Vibration Monitor Module
- Mounting hardware: 3300 XL probe bracket & lock nut assembly
- Bently Nevada System 1 software (optional, for trending & diagnostics)
Contact Konmask.com for complete loop pricing and availability.
Compliance & Industry Standards
- API 670 – Machinery Protection Systems (5th Edition)
- IEC 61511 – Functional Safety for Safety Instrumented Systems
- ATEX / IECEx – Hazardous area certification (zone-specific; confirm with datasheet)
- CE Marking – EMC Directive 2014/30/EU
- FM & CSA – North American hazardous location approvals
- ISO 10816 / ISO 20816 – Mechanical vibration measurement standards
Quality Assurance & Sourcing
Konmask.com sources Bently Nevada 330903-00-16-05-01-00 units through authorized industrial distribution channels. Every unit shipped undergoes:
- Visual inspection against Bently Nevada factory cosmetic standards
- Verification of part number label, date code, and serial traceability
- Continuity and insulation resistance check prior to dispatch
- Anti-static packaging with humidity indicator card
Certificates of conformance and test reports are available upon request for regulated industries.
How to Source This Part
- In-Stock Orders: Add to cart and check out — ships within 1–3 business days from our warehouse.
- Bulk / Project Quantities: Email support@konmask.com for volume pricing and lead-time commitment.
- Urgent Shutdown Support: Call +0086 19859288691 for expedited sourcing during planned or unplanned outages.
- Cross-Reference / Replacement: If you are replacing a different part number, share your existing tag number and we will confirm compatibility.
Application-Specific FAQ
Q: Can this transducer be used with a 3500 series monitor?
A: Yes. The 330903-00-16-05-01-00 is compatible with 3500/42 and 3500/45 vibration monitor modules when paired with the correct Proximitor driver. Confirm the driver output matches the monitor input card specification.
Q: What target material is this transducer calibrated for?
A: Factory calibration is performed on AISI 4140 steel. For shafts made of stainless steel, titanium, or other alloys, a field recalibration or target material correction factor must be applied per Bently Nevada application note.
Q: Is this part suitable for hazardous area (Zone 1 / Division 1) installations?
A: The 3300 XL NSv series carries ATEX and FM approvals. Verify the specific entity parameters (Vmax, Imax, Ci, Li) against your barrier or Zener barrier before installation in classified areas.
Q: What is the difference between the NSv and standard 3300 XL transducer?
A: The NSv (Non-Standard Voltage) variant operates at a different bias voltage than the standard –24 V version, making it compatible with specific legacy monitor configurations. Always match the transducer suffix to the Proximitor driver specification.
Q: Do you offer calibration or repair services?
A: We supply new and surplus units. For calibration or repair, we recommend contacting a Bently Nevada authorized service center. We can assist with sourcing a replacement unit while your original is being serviced.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
