Vibration Monitoring Solution – Bently Nevada 330910-00-12-50-02-00 | 3300 XL NSv Series
Where This Product Is Used
The Bently Nevada 330910-00-12-50-02-00 is a high-precision eddy-current proximity transducer engineered for continuous, non-contact vibration and position measurement in rotating machinery. It is widely deployed in:
- Steam & Gas Turbines – shaft radial vibration and axial position monitoring per API 670
- Centrifugal & Reciprocating Compressors – real-time rotor orbit and eccentricity measurement
- Pumps & Fans – early-warning detection of imbalance, misalignment, and bearing wear
- Gearboxes – gear mesh frequency analysis and shaft displacement tracking
- Hydro & Wind Turbines – low-speed shaft monitoring in renewable energy plants
- Marine Propulsion Systems – continuous shaft monitoring in harsh offshore environments
Wherever rotating equipment reliability is mission-critical, the 3300 XL NSv system delivers the measurement accuracy that plant engineers and OEM integrators depend on.
Technical Specifications
- Part Number: 330910-00-12-50-02-00
- Series: Bently Nevada 3300 XL NSv (Non-Standard voltage)
- Sensor Type: Eddy-Current Proximity Transducer
- Probe Tip Diameter: 8 mm (standard)
- Cable Length: 5 m (integral)
- Extension Cable: 5 m (matched pair)
- Total System Length: 10 m (probe + extension)
- Linear Range: 0.25 mm – 2.54 mm (10 mil – 100 mil)
- Scale Factor: 7.87 V/mm (200 mV/mil)
- Frequency Response: DC – 10,000 Hz (–3 dB)
- Supply Voltage: –24 VDC (nominal)
- Output Voltage: –2 VDC to –18 VDC
- Operating Temperature: –35 °C to +121 °C (probe); –35 °C to +66 °C (driver)
- Target Material: AISI 4140 steel (standard); other alloys available
- Connector: 2-pin MIL-C-5015 (probe side)
- Approvals: CE, ATEX, IECEx (consult datasheet for zone ratings)
Why Engineers Specify This Model
- API 670 Compliance – meets the industry standard for machinery protection systems, simplifying plant acceptance testing
- NSv (Non-Standard voltage) Output – compatible with legacy 3300 series monitors without rewiring, protecting existing infrastructure investment
- Matched System Calibration – probe, extension cable, and driver are factory-calibrated as a matched set, eliminating field calibration errors
- Wide Temperature Range – suitable for both cryogenic and high-temperature process environments
- Robust EMI Immunity – shielded coaxial cable construction rejects electrical noise in VFD-heavy environments
- Drop-in Replacement – pin-compatible with earlier 3300 series transducers, minimizing downtime during upgrades
Complete System Bill of Materials
A fully functional 3300 XL NSv measurement loop typically includes:
- Proximity Probe: 330910-00-12-50-02-00 (this item)
- Extension Cable: 330130-080-00-00 (5 m, included in system)
- Proximitor® Driver/Oscillator: 330180-X1-05 (sold separately)
- Monitor Module: 3300/16 or 3500/42M (sold separately)
- Mounting Hardware: Probe holder, lock nut, and armored conduit (site-supplied)
Contact us to source the complete loop as a verified matched set.
Compliance & Industry Standards
- API 670 – Machinery Protection Systems
- ISO 10816 / ISO 20816 – Mechanical Vibration Evaluation
- IEC 60079 – Equipment for Explosive Atmospheres (ATEX/IECEx)
- CE Marking – EU Machinery Directive compliance
- RoHS – Restriction of Hazardous Substances
Quality Assurance & Sourcing
Every unit offered by Konmask.com undergoes a documented incoming inspection process:
- Visual inspection for physical damage, label integrity, and connector condition
- Functional verification against OEM datasheet specifications where test equipment permits
- Traceability documentation retained on file
- Sourced from authorized distributors, OEM surplus, or verified industrial estates
- Packaging inspected and resealed to prevent transit damage
We specialize in hard-to-find and obsolete Bently Nevada components for plant maintenance and emergency replacement scenarios.
How to Source This Part
- Add to Cart – click the button above to purchase directly online
- Request a Quote – email support@konmask.com for volume pricing or matched-set configurations
- Urgent Requirement – call/WhatsApp +0086 19859288691 for same-day response on critical plant shutdowns
- Export Orders – we ship globally with full commercial invoice and packing list documentation
Application-Specific FAQ
Q: Is the 330910-00-12-50-02-00 compatible with the Bently Nevada 3500 monitoring system?
A: Yes, when paired with the appropriate 3500-series input module and a compatible Proximitor driver. Verify the driver output voltage range matches the 3500 module input specification before installation.
Q: What is the difference between the NSv and standard 3300 XL transducers?
A: NSv (Non-Standard voltage) variants output a slightly different voltage range optimized for specific legacy monitor cards. They are not interchangeable with standard-voltage probes without verifying monitor compatibility.
Q: Can this probe be used on non-ferrous targets such as aluminum or titanium?
A: The standard calibration is for AISI 4140 steel. Non-ferrous or exotic alloy targets require a target-specific calibration curve. Contact us for application engineering support.
Q: What is the lead time for this part?
A: In-stock units ship within 1–3 business days. For out-of-stock situations, typical lead time is 2–4 weeks depending on sourcing. Contact us for real-time availability.
Q: Do you provide a warranty?
A: Yes. We offer a 90-day functional warranty on all tested units. Extended warranty options are available upon request.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
