EPRO PR6423/01C-010 CON021 8mm Eddy Current Proximity Signal Converter | Replacement, Equivalent & Selection Guide
The EPRO PR6423/01C-010 CON021 is an 8mm eddy current proximity signal converter designed for use in industrial vibration monitoring and machinery protection systems. It converts the raw output of an eddy current proximity probe into a conditioned signal suitable for monitoring systems, PLCs, and DCS platforms. Sourced and supplied by Konmask.com, this unit is ideal for engineers seeking a reliable, OEM-grade component or a verified equivalent replacement.
Technical Specifications
- Part Number: PR6423/01C-010 CON021
- Brand: EPRO (Baker Hughes / Bently Nevada ecosystem compatible)
- Type: Eddy Current Signal Converter (Proximitor)
- Probe Gap Range: 0–2 mm (nominal 8mm probe system)
- Output Signal: –24 VDC bias voltage; linear voltage output proportional to gap
- Supply Voltage: –24 VDC (typical)
- Sensitivity: 7.87 V/mm (200 mV/mil)
- Frequency Range: DC to 10 kHz
- Operating Temperature: –35°C to +85°C
- Connector: 9-pin D-sub (CON021 configuration)
- Weight: Approx. 700 g (packaged)
- Compliance: CE, RoHS compatible
Compatible Replacement & Equivalent Models
The following models are commonly evaluated as replacements or equivalents for the PR6423/01C-010 CON021. Always verify electrical and mechanical compatibility before substitution:
- EPRO PR6423/00C-010 – Same series, different connector variant; verify CON type before ordering
- Bently Nevada 3300 XL 8mm Proximitor – Functionally equivalent in many Bently Nevada monitoring systems
- EPRO PR6423/01C-030 – Extended cable version; same converter electronics
- EPRO PR6424 Series – Next-generation replacement with enhanced EMI shielding
- Metrix ST5484E – Third-party equivalent for non-OEM applications; confirm output scaling
Note: Konmask.com recommends using OEM parts wherever possible. Contact our team for cross-reference verification.
Why Choose the Original Model
- OEM Accuracy: Factory-calibrated sensitivity of 7.87 V/mm ensures measurement integrity
- System Certification: Designed and tested to integrate with EPRO and compatible monitoring racks
- Long-Term Reliability: Proven in continuous 24/7 industrial environments including turbines, compressors, and pumps
- Warranty & Traceability: Supplied with full documentation and traceability upon request
- Reduced Commissioning Risk: Drop-in replacement with no recalibration required in matched systems
Typical Applications
- Shaft radial vibration monitoring on rotating machinery
- Axial position (thrust) measurement on turbines and compressors
- Differential expansion monitoring in steam turbines
- Eccentricity and phase reference measurement
- Integration with EPRO MMS 6000, MMS 6350, and compatible DCS/PLC platforms
System Compatibility
- EPRO MMS 6000 Series – Direct compatible
- EPRO MMS 6350 / 6500 – Compatible with appropriate rack configuration
- Bently Nevada 3500 Series – Compatible via signal conditioning adapter (verify gap range)
- Siemens SPPA-T3000 – Compatible with signal interface module
- ABB System 800xA / Symphony Plus – Compatible via analog input cards
- Emerson DeltaV / Ovation – Compatible with standard 4–20 mA or voltage input modules
Selection Guide
Use the following criteria to confirm the PR6423/01C-010 CON021 is the correct part for your application:
- Probe diameter: Must be 8mm EPRO-compatible probe (e.g., PR6423 probe series)
- Cable length: Confirm extension cable length matches system requirement (010 = 1.0m driver cable)
- Connector type: CON021 = 9-pin D-sub; verify rack/monitor connector pinout
- Supply voltage: Confirm –24 VDC supply is available at installation point
- Output range: Verify monitor input accepts –24 VDC bias with linear voltage output
- Temperature rating: Confirm ambient temperature at installation is within –35°C to +85°C
If any parameter does not match, contact [email protected] for a cross-reference recommendation.
Quality Assurance & Sourcing
- All units sourced from authorized distributors or verified surplus channels
- Pre-shipment inspection and functional verification available on request
- Certificate of Conformance (CoC) and test reports available for critical applications
- Packaging: Anti-static, moisture-proof, with individual part labeling
- Lead time: Typically 3–7 business days; expedited options available
How to Order
- Confirm part number: PR6423/01C-010 CON021
- Specify quantity and required delivery date
- Request a quote via [email protected] or add directly to cart
- Provide application details if cross-reference or compatibility verification is needed
- Payment: T/T, PayPal, credit card accepted; export documentation available
Replacement & Compatibility FAQ
Q: Can the PR6423/01C-010 CON021 replace a Bently Nevada 3300 XL proximitor?
A: In many cases yes, but output scaling and connector pinout must be verified. Contact us for a detailed cross-reference.
Q: What is the difference between CON021 and CON031?
A: CON021 uses a 9-pin D-sub connector; CON031 uses a different connector configuration. Verify your rack’s input connector before ordering.
Q: Is recalibration required after replacement?
A: When replacing with an identical OEM part in a matched system, recalibration is typically not required. Third-party equivalents may require gap and sensitivity verification.
Q: Do you supply the matching PR6423 probe and extension cable?
A: Yes. Contact us to order a complete probe system including probe, extension cable, and converter.
Q: What warranty is provided?
A: Konmask.com provides a 12-month warranty on all supplied units against manufacturing defects.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: [email protected] | +0086 19859288691





