EPRO PR6424/000-010 CON021 Eddy Current Sensor | Replacement, Equivalent & Selection Guide
The EPRO PR6424/000-010 CON021 is a precision eddy current sensor widely deployed in turbomachinery protection and condition monitoring systems. Whether you are sourcing an OEM replacement, evaluating a functional equivalent, or selecting the right sensor for a new installation, this guide provides the technical depth and sourcing confidence your engineering team needs.
Technical Specifications
| Manufacturer | EPRO (Baker Hughes / Bently Nevada ecosystem compatible) |
| Part Number | PR6424/000-010 CON021 |
| Sensor Type | Eddy Current (Non-contact Displacement) |
| Measurement Range | 0 – 10 mm (nominal) |
| Output Signal | -24 VDC (standard EPRO driver compatible) |
| Sensitivity | 8 mV/µm (nominal) |
| Operating Temperature | -50°C to +120°C (sensor tip) |
| Cable Length | Matched extension cable required (CON021 driver) |
| Target Material | Steel / Stainless Steel (AISI 4140 reference) |
| Weight | Approx. 320 g (sensor + connector assembly) |
| Ingress Protection | IP67 (sensor body) |
| Compliance | API 670 compatible; CE marked |
Compatible Replacement & Equivalent Models
When the OEM part is unavailable or lead times are unacceptable, the following models offer functional equivalence. Always verify electrical and mechanical compatibility with your system integrator before substitution.
| Model | Manufacturer | Compatibility Notes |
|---|---|---|
| PR6424/000-010 CON021 | EPRO (OEM) | Direct OEM — preferred replacement |
| 3300 XL 8mm Proximity Transducer | Bently Nevada | Functional equivalent; requires driver swap (3300 XL driver) |
| PR6423/000-010 | EPRO | Shorter range variant; verify gap calibration |
| PR6426/000-010 | EPRO | Extended temperature variant; drop-in for high-heat zones |
| CS-1 / CS-2 Series | Metrix (SKF) | API 670 compliant; connector and driver adaptation required |
| TQ-Series Eddy Probes | Wilcoxon / Amphenol | Functional equivalent for non-critical monitoring loops |
⚠ Note: Substitution of eddy current sensors in API 670 protection systems must be validated by a qualified machinery protection engineer. Konmask.com supplies OEM and verified-equivalent parts only.
Why Choose the Original Model
- System-Certified Performance: The PR6424/000-010 CON021 is factory-calibrated and validated as a matched set with the CON021 driver — no field recalibration required.
- API 670 Compliance: Ensures your machinery protection system remains audit-ready and insurance-compliant.
- Proven MTBF: EPRO sensors are specified in thousands of turbomachinery installations globally, with documented reliability in continuous-duty environments.
- OEM Traceability: Full documentation chain from manufacturer to end-user — critical for regulated industries (power generation, oil & gas, petrochemical).
- Minimized Commissioning Risk: Using the original part eliminates compatibility unknowns and reduces downtime risk during replacement.
Typical Applications
- Steam and gas turbine shaft radial vibration monitoring
- Compressor rotor axial position measurement
- Pump and motor bearing displacement monitoring
- Gearbox and expander shaft orbit analysis
- API 670 machinery protection systems (radial vibration, axial position, speed)
- Condition-based maintenance (CBM) programs in power generation and refining
System Compatibility
The PR6424/000-010 CON021 is designed for use within the EPRO CON021 driver ecosystem and is also compatible with the following monitoring platforms when used with appropriate signal conditioning:
- EPRO MMS 6000 / MMS 6350 / MMS 6823 monitoring systems
- Bently Nevada 3500 Series (with signal conditioning adapter)
- Emerson AMS 6500 Machinery Health Monitor
- Metso / Neles machinery protection racks
- Custom DCS/PLC integration via 4–20 mA transmitter modules
Selection Guide
Use the following decision matrix to confirm the correct sensor for your application:
| Requirement | Recommended Model |
|---|---|
| Direct OEM replacement, CON021 driver system | PR6424/000-010 CON021 ✅ |
| High-temperature environment (>120°C) | PR6426/000-010 (HT variant) |
| Shorter measurement range (0–5 mm) | PR6423/000-010 |
| Bently Nevada 3500 system, no driver swap budget | Bently Nevada 3300 XL 8mm |
| Non-critical monitoring, cost-sensitive | Metrix CS-1 / Wilcoxon TQ-Series |
| Uncertain — need engineering review | Contact Konmask.com for free selection support |
Quality Assurance & Sourcing
- Verified Supply Chain: All EPRO sensors supplied by Konmask.com are sourced from authorized distributors or verified surplus channels with full traceability documentation.
- Pre-Shipment Inspection: Each unit undergoes visual inspection, label verification, and packaging integrity check before dispatch.
- Authenticity Documentation: Certificate of conformance (CoC) and, where available, OEM test reports are provided upon request.
- No Counterfeit Policy: Konmask.com maintains a strict zero-tolerance policy on counterfeit or non-OEM parts represented as genuine.
- Warranty: 12-month warranty against manufacturing defects on all new OEM units.
How to Order
- Step 1 — Confirm Part Number: Verify your existing sensor label reads PR6424/000-010 CON021. Photograph the nameplate if unsure.
- Step 2 — Specify Quantity & Urgency: Indicate required quantity and whether standard or expedited shipping is needed.
- Step 3 — Request Quote: Email support@konmask.com or call +0086 19859288691 with your PO or RFQ.
- Step 4 — Receive Documentation: We provide proforma invoice, CoC, and shipping tracking upon order confirmation.
- Step 5 — Delivery & Support: Global shipping available. Post-delivery technical support included.
Replacement & Compatibility FAQ
Q: Can I replace the PR6424/000-010 CON021 with a Bently Nevada 3300 XL without recalibrating my system?
A: No. The two sensors use different driver electronics and sensitivity curves. A full system recalibration and driver replacement is required. Contact our engineering team for a compatibility assessment.
Q: Is the PR6424/000-010 CON021 interchangeable with the PR6424/000-030?
A: The suffix (-010 vs -030) typically denotes cable length or connector variant. Verify your driver and extension cable specifications before substituting.
Q: Do you supply matched sensor-driver-extension cable sets?
A: Yes. Konmask.com can supply complete matched sets (sensor + CON021 driver + extension cable) to ensure factory-calibrated performance.
Q: What is the lead time for the PR6424/000-010 CON021?
A: Standard stock items ship within 3–5 business days. For urgent requirements, contact us for expedited options.
Q: Can Konmask.com provide a Certificate of Conformance?
A: Yes. CoC is provided as standard with all new OEM units. Test reports are available upon request for critical applications.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
