GE DS200ACNAG1ADD Field Supply Amplifier Board | Replacement, Equivalent & Selection Guide
The GE DS200ACNAG1ADD is a Field Supply Amplifier Board designed for use in GE’s Mark VI Turbine Control System. It provides regulated field excitation power to connected I/O and field devices, ensuring stable and reliable signal conditioning across the control loop. As a critical component in power generation and industrial automation environments, this board is widely deployed in gas turbine, steam turbine, and combined-cycle plant control panels.
Technical Specifications
- Part Number: DS200ACNAG1ADD
- Manufacturer: GE (General Electric)
- Series: Mark VI / DS200 Series
- Function: Field Supply Amplifier Board
- Form Factor: PCB Card Module
- Weight: 560 g (approx.)
- Condition Available: New, Refurbished, Tested
- Application: Gas Turbine / Steam Turbine Control Panels
- Compatibility: GE Mark VI Turbine Control System
- Country of Origin: USA
Compatible Replacement & Equivalent Models
If the DS200ACNAG1ADD is unavailable or you are evaluating alternatives, the following models may serve as functional equivalents or replacements depending on your system revision and configuration:
- DS200ACNAG1A — Base revision, functionally equivalent in most Mark VI configurations
- DS200ACNAG1ABB — Alternate suffix revision; verify firmware compatibility before substitution
- DS200ACNAG1ACC — Later revision with minor BOM changes; pin-compatible
- DS200ACNAG1ADB — Cross-reference for select Mark VIe panel builds
- DS200ACNAG1AEB — Consult GE documentation for revision-specific differences
Note: Always verify the exact revision suffix and system firmware version before substituting. Contact support@konmask.com for compatibility confirmation.
Why Choose the Original DS200ACNAG1ADD
- Exact OEM Fit: Designed and validated by GE for Mark VI systems — no firmware patching or hardware modification required.
- Proven Reliability: Deployed in thousands of power generation facilities worldwide with a documented service record.
- Warranty & Traceability: Original parts sourced through authorized channels come with full traceability documentation.
- Reduced Commissioning Risk: Eliminates compatibility uncertainty associated with aftermarket or cross-revision substitutions.
Typical Applications
- Gas turbine control panels (GE Frame 5, 6, 7, 9 series)
- Steam turbine governor and protection systems
- Combined-cycle power plant automation
- Industrial compressor and pump control systems
- Offshore platform turbine control upgrades
System Compatibility
- Primary System: GE Mark VI Turbine Control System
- Related Systems: Mark VIe (verify revision), Mark V (adapter may be required)
- Backplane Interface: DS200 Series VME-style card cage
- I/O Compatibility: Works with standard GE VCMI, VTUR, VPRO, and VSVO I/O boards in the same panel
Selection Guide
Use the following criteria to confirm DS200ACNAG1ADD is the correct part for your application:
- Step 1 — Identify your control system: Confirm you are running a GE Mark VI (not Mark VIe or Mark V) turbine control system.
- Step 2 — Match the suffix: The suffix “ADD” denotes a specific hardware revision. Cross-check against your panel BOM or GE engineering drawing.
- Step 3 — Check slot assignment: Verify the board occupies the correct slot in the DS200 card cage as specified in your system documentation.
- Step 4 — Confirm firmware version: Ensure the replacement board is compatible with the installed Mark VI software version (GE Toolbox / WorkstationST).
- Step 5 — Contact us if uncertain: Our technical team can cross-reference your panel serial number and GE drawing number to confirm the correct part. Email support@konmask.com.
Quality Assurance & Sourcing
- All boards are inspected and tested prior to shipment.
- Refurbished units undergo full functional testing on GE-compatible test benches.
- Sourced from decommissioned power plants, authorized distributors, and OEM surplus channels.
- Anti-static packaging and shock-protected shipping for all PCB modules.
- Certificate of conformance available upon request.
How to Order
- Add DS200ACNAG1ADD to cart and proceed to checkout.
- For bulk orders or urgent requirements, email support@konmask.com with your quantity and delivery timeline.
- Include your panel serial number or GE drawing number for technical verification if needed.
- We accept T/T bank transfer, PayPal, and major credit cards. Lead time: 1–5 business days for in-stock units.
Replacement & Compatibility FAQ
Q: Can DS200ACNAG1A replace DS200ACNAG1ADD?
A: In most Mark VI configurations, yes — but the suffix revision may indicate minor component changes. We recommend confirming with your GE system documentation or contacting us.
Q: Is this board compatible with Mark VIe?
A: The DS200ACNAG1ADD is primarily designed for Mark VI. Mark VIe uses a different architecture; compatibility must be verified on a case-by-case basis.
Q: Do you offer a warranty?
A: Yes. New units carry the standard manufacturer warranty. Refurbished units include a 90-day tested warranty from Konmask.com.
Q: Can I send my faulty board for repair?
A: Yes, we offer board-level repair services. Contact support@konmask.com for a repair quote.
Q: What is the lead time?
A: In-stock units ship within 1–3 business days. Out-of-stock items typically have a 2–4 week lead time depending on sourcing.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
