GE DS200VPBLG1ADD Mark V VP Board | Replacement, Equivalent & Selection Guide
The GE DS200VPBLG1ADD is a VP (Voter Processor) board used in the General Electric Mark V Turbine Control System. This page provides comprehensive technical specifications, compatible replacement options, application guidance, and sourcing information to help engineers and procurement teams make confident decisions.
Technical Specifications
- Part Number: DS200VPBLG1ADD
- Series: GE Mark V Turbine Control
- Board Type: VP – Voter Processor Board
- Manufacturer: General Electric (GE)
- Form Factor: PCB card, rack-mount
- Operating Voltage: 5 VDC (logic), ±15 VDC (analog rails, system-supplied)
- Communication: ARCNET / Mark V internal bus
- Processor: Dedicated voter logic processor
- I/O Interface: Backplane edge connector, Mark V standard pinout
- Operating Temperature: 0 °C to 60 °C
- Weight: ~100 g (board only)
- Condition Available: New surplus, refurbished, tested
Compatible Replacement & Equivalent Models
The following boards are functionally equivalent or drop-in compatible with the DS200VPBLG1ADD in most Mark V configurations. Always verify firmware revision and backplane slot assignment before substitution.
- DS200VPBLG1ADB – Revision B variant; same voter logic, minor BOM change
- DS200VPBLG1ADC – Revision C; compatible with later Mark V firmware
- DS200VPBLG1AEA – Enhanced revision; recommended for long-term replacement
- DS200VPBLG1AFB – Final production revision; broadest firmware compatibility
- DS215VPBLG1AZZ01A – Mark VI migration equivalent (requires adapter kit)
Note: Cross-reference your panel serial number and GE engineering drawing before ordering a replacement.
Why Choose the Original Model
- Exact firmware compatibility – DS200VPBLG1ADD is validated against specific Mark V PROM revisions; substitutes may require re-parameterization.
- Proven field reliability – Original GE boards carry decades of operational history in gas turbine, steam turbine, and compressor applications.
- Reduced commissioning risk – No hardware mapping changes required when replacing like-for-like.
- OEM traceability – Original part numbers simplify spare-parts documentation and audit trails for regulated industries.
Typical Applications
- GE Frame 5, Frame 6, Frame 7, Frame 9 gas turbine control panels
- Steam turbine governor and protection systems
- Combined-cycle power plant DCS integration
- Compressor station automation (oil & gas upstream/midstream)
- Industrial co-generation facilities
- Refinery and petrochemical plant turbine drives
System Compatibility
- Control System: GE Mark V (MKVC)
-
Compatible Panels:
,
, ,, Mark V panel configurations - Slot Position: VP slot in Mark V core rack (verify with GE panel drawing)
- Firmware: Compatible with Mark V PROM revisions up to and including R4.x
- Not compatible with: Mark IV, Mark VI, Mark VIe without hardware adaptation
Selection Guide
Use the decision matrix below to select the right board for your application:
- Exact replacement (same revision): Order DS200VPBLG1ADD — zero-risk swap, no firmware changes needed.
- Upgrade path (newer revision): Consider DS200VPBLG1AEA or DS200VPBLG1AFB — verify PROM compatibility with GE service bulletin.
- Mark V → Mark VI migration: DS215VPBLG1AZZ01A with GE migration kit — consult Konmask for full BOM.
- Budget-sensitive / emergency: Tested refurbished DS200VPBLG1ADD — Konmask provides 12-month warranty on all refurbished units.
- Long lead-time risk: Stock 1–2 spare boards; this part is end-of-life from OEM and availability is limited.
Quality Assurance & Sourcing
- All units inspected and function-tested prior to shipment
- Anti-static packaging with humidity indicator cards
- Traceable documentation available (test reports, photos)
- New surplus, refurbished, and exchange options available
- 12-month warranty on refurbished units; 6-month on new surplus
- Global shipping with DHL / FedEx / UPS express options
- Export compliance: ECCN classification available on request
How to Order
- Confirm your panel drawing number and VP slot assignment.
- Note your current board revision (label on PCB edge).
- Contact Konmask with part number, quantity, and required condition (new / refurbished / exchange).
- Receive quote within 1 business day; expedited quotes available for AOG/emergency situations.
- Payment via T/T, PayPal, or trade credit (approved accounts).
- Shipping within 1–3 business days after payment confirmation.
📧 [email protected] | 📞 +0086 19859288691
Replacement & Compatibility FAQ
Q: Can I use DS200VPBLG1ADB instead of DS200VPBLG1ADD?
A: In most cases yes — Revision B is a minor BOM change with no functional difference. Confirm with your GE panel drawing.
Q: Is this board compatible with Mark VI?
A: No. Mark VI uses a different backplane and processor architecture. A migration kit and engineering assessment are required.
Q: Do you provide a test report?
A: Yes. All refurbished units ship with a functional test report. New surplus units include incoming inspection records on request.
Q: What is the lead time?
A: In-stock units ship within 1–3 business days. If not in stock, typical sourcing lead time is 2–4 weeks.
Q: Can Konmask repair a faulty DS200VPBLG1ADD?
A: Yes, board-level repair service is available. Contact us with fault description and photos for a repair assessment.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: [email protected] | +0086 19859288691
