GE IC200PNS002 VersaMax PROFINET Scanner (PNS) Module | Replacement, Equivalent & Selection Guide
The General Electric IC200PNS002 is a PROFINET IO Scanner (PNS) module designed for the GE VersaMax distributed I/O platform. It enables seamless integration of VersaMax I/O stations into PROFINET IO networks, acting as a device-side adapter that communicates with a PROFINET IO Controller (PLC or DCS). Widely used in factory automation, process control, and machine building, this module is a critical component for engineers migrating or expanding PROFINET-based control architectures.
Technical Specifications
- Part Number: IC200PNS002
- Brand / Manufacturer: General Electric (GE Automation & Controls)
- Series: VersaMax Distributed I/O
- Module Type: PROFINET IO Scanner (Device / Slave)
- Network Protocol: PROFINET IO (IEC 61158 / IEC 61784)
- Communication Role: PROFINET IO Device (connects to IO Controller)
- Supported I/O Modules: VersaMax I/O modules (IC200 series)
- Max I/O Points: Up to 64 I/O modules per station
- Ethernet Ports: 2 × RJ45 (integrated switch, supports line/ring topology)
- Data Rate: 10/100 Mbps Auto-Negotiation
- Power Supply: 24 VDC (from VersaMax power supply module)
- Operating Temperature: 0°C to 60°C
- Storage Temperature: -40°C to 85°C
- Humidity: 5% to 95% non-condensing
- Weight: Approx. 320 g
- Certifications: CE, UL, cUL
- Housing: DIN-rail mountable via VersaMax carrier
Compatible Replacement & Equivalent Models
When the IC200PNS002 is unavailable or end-of-life, the following alternatives may be considered depending on your system architecture:
- IC200PNS001 — Earlier revision of the PNS module; functionally similar, verify firmware compatibility
- IC200PNS003 — Later revision with enhanced diagnostics; drop-in replacement in most applications
- Siemens ET 200S IM 151-3 PN — Third-party PROFINET IO device; requires I/O remapping and GSD file update
- Phoenix Contact Inline PROFINET IRT — Alternative distributed I/O with PROFINET support; requires full re-engineering
- Beckhoff EK1100 EtherCAT Coupler — Only suitable if migrating from PROFINET to EtherCAT; not a direct replacement
Note: Always verify GSD/GSDML file compatibility and firmware version before substituting modules in a live system.
Why Choose the Original IC200PNS002
- Guaranteed Compatibility: Native integration with GE VersaMax I/O carriers and power supplies — no adapter or re-wiring required
- Proven Reliability: Deployed in thousands of industrial installations worldwide across automotive, oil & gas, and utilities sectors
- Simplified Commissioning: Pre-loaded GSDML file; recognized automatically by Siemens TIA Portal, Rockwell Studio 5000, and other PROFINET controllers
- Long Service Life: Robust industrial-grade design rated for continuous 24/7 operation in harsh environments
- Reduced Engineering Risk: Eliminates the need for I/O remapping, custom GSD files, or topology redesign
Typical Applications
- Distributed I/O expansion for PROFINET-based PLC systems (Siemens S7-300/400/1500, GE PACSystems RX3i)
- Remote I/O stations in automotive assembly lines and body-in-white (BIW) processes
- Process automation in chemical plants, water treatment, and power generation
- Machine tool control and CNC integration
- Building automation and HVAC control panels
- Conveyor and material handling systems
System Compatibility
- Compatible Controllers (IO Controllers): Siemens S7-300 / S7-400 / S7-1500, GE PACSystems RX3i / RX7i, Rockwell ControlLogix (via PROFINET bridge), Schneider Modicon M580
- Compatible I/O Modules: All IC200 series VersaMax I/O modules (digital, analog, specialty)
- Compatible Power Supplies: IC200PWR002, IC200PWR101, IC200PWR201
- Compatible Carriers: IC200CHS002, IC200CHS022 and other VersaMax I/O carriers
- Engineering Software: GE Proficy Machine Edition, Siemens TIA Portal (via GSDML), Step 7
- Topology Support: Line, star, and Media Redundancy Protocol (MRP) ring
Selection Guide
Use this guide to confirm the IC200PNS002 is the right module for your application:
- Step 1 — Network Protocol: Confirm your controller uses PROFINET IO (not EtherNet/IP, Modbus TCP, or PROFIBUS). If yes, proceed.
- Step 2 — I/O Platform: Confirm your remote I/O station uses GE VersaMax (IC200 series) modules and carriers.
- Step 3 — Role: The IC200PNS002 is a PROFINET IO Device (slave). Your controller must be a PROFINET IO Controller (master).
- Step 4 — I/O Count: Count total I/O modules per station. IC200PNS002 supports up to 64 modules per station.
- Step 5 — Revision: Check your existing system’s firmware. IC200PNS002 (Rev. 002) is compatible with Proficy ME 8.0 and above.
- Step 6 — Topology: If MRP ring redundancy is required, confirm your controller and switch support MRP.
If any step does not match, contact support@konmask.com for a tailored recommendation.
Quality Assurance & Sourcing
- Source: Sourced from authorized distributors and verified surplus channels
- Inspection: Every unit undergoes visual inspection, label verification, and functional pre-shipment testing
- Authenticity: Anti-counterfeit checks performed on all GE-branded modules
- Condition: New, refurbished, and tested-used options available — specify at time of order
- Warranty: 12-month warranty against manufacturing defects
- Packaging: ESD-safe packaging with original or equivalent protective materials
How to Order
- Part Number: IC200PNS002
- Minimum Order: 1 unit
- Lead Time: In-stock items ship within 1–3 business days; contact us for bulk order lead times
- Payment: T/T (Wire Transfer), PayPal, credit card via secure checkout
- Shipping: DHL, FedEx, UPS worldwide; sea freight available for large orders
- RFQ / Bulk Pricing: Email support@konmask.com or call +0086 19859288691
- Online Order: Add to cart and checkout at Konmask.com
Replacement & Compatibility FAQ
Q: Can IC200PNS003 replace IC200PNS002 directly?
A: In most cases yes — IC200PNS003 is a later hardware revision with the same form factor and GSDML structure. Verify firmware version compatibility with your controller before swapping.
Q: Can I use IC200PNS002 with a Siemens S7-1500 controller?
A: Yes. Import the GSDML file into TIA Portal, configure the device, and assign an IP address. The module operates as a standard PROFINET IO Device.
Q: Is IC200PNS002 compatible with PROFINET IRT (Isochronous Real-Time)?
A: The IC200PNS002 supports PROFINET RT. For IRT applications, consult GE documentation or contact us for alternative module recommendations.
Q: What is the difference between IC200PNS001 and IC200PNS002?
A: IC200PNS002 is a hardware revision update with improved diagnostics and broader controller compatibility. IC200PNS001 may not support all features available in IC200PNS002.
Q: Do you provide the GSDML file?
A: Yes. The GSDML file is available for download upon request. Contact support@konmask.com.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
