GE IS200TSVOH1BDC Terminal Board | Replacement, Equivalent & Selection Guide
The GE IS200TSVOH1BDC is a Terminal Board designed for use in GE’s Mark VI Turbine Control System. It serves as a critical I/O interface board, providing reliable signal termination between field devices and the Mark VI controller. Konmask.com supplies genuine and compatible IS200TSVOH1BDC boards with full traceability for industrial automation and power generation applications.
Technical Specifications
- Part Number: IS200TSVOH1BDC
- Manufacturer: GE (General Electric)
- Series: Mark VI Turbine Control
- Board Type: Terminal / Signal Termination Board
- Form Factor: PCB Module
- Weight: ~400 g
- Application: Gas & Steam Turbine Control, Power Generation
- Condition Available: New, Refurbished, Tested
Compatible Replacement & Equivalent Models
When the IS200TSVOH1BDC is unavailable or discontinued, the following models may serve as functional equivalents or drop-in replacements depending on your system revision. Always verify hardware revision and firmware compatibility before substitution.
- IS200TSVOH1B – Base revision; functionally equivalent in most Mark VI configurations
- IS200TSVOH1A – Earlier revision; check connector pinout compatibility
- IS200TSVOH2B – Upgraded variant with enhanced I/O capacity
- IS200TSVO H1BDC – Alternate formatting of same part number
- IS215TSVOH1B – Mark VIe compatible variant; verify system generation
Contact Konmask.com for cross-reference verification before ordering a replacement.
Why Choose the Original IS200TSVOH1BDC
- ✅ Factory-validated for GE Mark VI turbine control architecture
- ✅ Guaranteed signal integrity and termination accuracy
- ✅ Full OEM traceability and revision documentation
- ✅ Minimizes integration risk in safety-critical turbine environments
- ✅ Supported by GE Speedtronic service documentation
Typical Applications
- Gas turbine control panels (Frame 5, 6, 7, 9 series)
- Steam turbine governor and protection systems
- Combined-cycle power plant DCS integration
- Compressor station automation
- Retrofit and upgrade projects for aging Mark V → Mark VI migrations
System Compatibility
- Primary System: GE Mark VI Turbine Control (Speedtronic)
- Compatible Racks: VCMI, VTUR, VPRO controller racks
- Communication: IONet (Mark VI proprietary I/O network)
- Not Compatible With: Mark V (IS200 series may require adapter), Mark VIe (verify revision)
Selection Guide
Use the following criteria to confirm the correct terminal board for your application:
- Step 1 – Identify System Generation: Confirm Mark VI vs. Mark VIe. IS200 series is Mark VI; IS215 series is Mark VIe.
- Step 2 – Check Hardware Revision: Match the suffix (H1BDC) to your existing board label or GE BOM.
- Step 3 – Verify I/O Channel Count: Confirm the number of analog/digital I/O channels required matches the TSVOH board specification.
- Step 4 – Confirm Rack Slot Position: Terminal boards are slot-specific in Mark VI racks — verify physical slot assignment.
- Step 5 – Contact Konmask: Send your existing part label photo or GE project BOM for expert cross-reference confirmation.
Quality Assurance & Sourcing
- All boards are inspected and tested prior to shipment
- Refurbished units include full functional test report
- Sourced from authorized distributors and certified surplus channels
- Anti-static packaging with humidity indicator cards
- Traceable lot documentation available on request
How to Order
- Add IS200TSVOH1BDC to cart and proceed to checkout, or
- Email support@konmask.com with your quantity and required condition (New / Refurbished / Tested)
- For urgent requirements, call/WhatsApp: +0086 19859288691
- Lead time: In-stock units ship within 1–3 business days; sourced units 5–15 business days
Replacement & Compatibility FAQ
Q: Can IS200TSVOH1B replace IS200TSVOH1BDC?
A: In most cases yes — the suffix “DC” typically denotes a minor revision. Verify with your GE project documentation or contact us for confirmation.
Q: Is IS200TSVOH1BDC compatible with Mark VIe?
A: No — Mark VIe uses the IS215 series. IS200TSVOH1BDC is designed for Mark VI only.
Q: Do you supply tested/refurbished units?
A: Yes. All refurbished units are bench-tested and include a functional test report.
Q: Can I send my faulty board for repair?
A: Yes, we offer board-level repair services. Contact us for a repair quote.
Q: What is the warranty?
A: New units carry manufacturer warranty. Refurbished units carry a 12-month Konmask warranty.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
