GE IS210AEDBH4A Bridge Interface Card | Replacement, Equivalent & Selection Guide
The GE IS210AEDBH4A is a Bridge Interface Card designed for use in GE’s Mark VI Turbine Control System. It serves as a critical communication bridge between the turbine control hardware and the I/O network, ensuring reliable data exchange in power generation and industrial automation environments. Konmask.com supplies genuine and compatible IS210AEDBH4A cards with full traceability and quality verification.
Technical Specifications
- Part Number: IS210AEDBH4A
- Manufacturer: GE (General Electric) / GE Vernova
- Series: Mark VI Turbine Control System
- Card Type: Bridge Interface Card (AEDB)
- Form Factor: VME-based plug-in module
- Communication Protocol: IONet (GE proprietary Ethernet-based I/O network)
- Operating Voltage: +5 VDC (supplied via backplane)
- Operating Temperature: 0°C to 60°C
- Weight: Approx. 440 g
- Dimensions: Standard 6U VME card
- Firmware: Compatible with Mark VI / Mark VIe control firmware
- Certifications: CE, UL (per GE system certification)
Compatible Replacement & Equivalent Models
The following models are functionally equivalent or direct replacements for the IS210AEDBH4A. Always verify firmware revision and backplane slot compatibility before substitution:
- IS210AEDBH2A — Earlier hardware revision; same functional role, verify firmware compatibility
- IS210AEDBH3A — Intermediate revision; pin-compatible with H4A in most Mark VI configurations
- IS215AEDBH4A — Mark VIe variant; enhanced diagnostics, confirm system generation before use
- IS200AEDBH1A — Legacy predecessor; limited to older Mark V/VI backplanes
- DS200AEDBH1A — Older DS-series equivalent; not recommended for new installations
Note: Konmask.com can assist with cross-reference verification. Contact us before ordering a substitute model.
Why Choose the Original IS210AEDBH4A
- Guaranteed Compatibility: Factory-matched to Mark VI backplane and IONet architecture
- Latest Hardware Revision (H4A): Incorporates GE’s most recent circuit improvements and EMI hardening
- Reduced Commissioning Risk: No firmware re-flashing or parameter re-mapping required
- Long Service Life: Designed for continuous 24/7 industrial operation in harsh environments
- OEM Traceability: Full documentation and serialization for compliance audits
Typical Applications
- Gas turbine and steam turbine control systems (power plants)
- Combined-cycle power generation facilities
- Industrial compressor and pump control
- Oil & gas upstream/downstream automation
- Petrochemical plant DCS integration with GE Mark VI controllers
- Renewable energy (wind turbine SCADA integration via Mark VI)
System Compatibility
- Primary System: GE Mark VI Turbine Control System
- Compatible With: Mark VIe (with firmware verification)
- Backplane: VME 6U standard GE Mark VI backplane
- I/O Network: GE IONet (100 Mbps Ethernet-based)
- Controller Boards: VCMI, VCRC, VTUR, VPRO series within Mark VI
- Not Compatible With: Mark V (UCCA/UCCE), Mark IV, or non-GE VME systems
Selection Guide
Use this guide to confirm the correct part for your application:
- Step 1 — Identify your control system generation: Confirm Mark VI vs. Mark VIe. The IS210AEDBH4A is optimized for Mark VI.
- Step 2 — Check hardware revision: H4A is the latest. If your system runs H2A or H3A, H4A is a drop-in upgrade in most cases.
- Step 3 — Verify slot position: Confirm the AEDB slot assignment in your Mark VI cabinet layout drawing.
- Step 4 — Firmware alignment: Ensure your Mark VI controller firmware supports the H4A revision (consult GE release notes or contact Konmask).
- Step 5 — Quantity & redundancy: Mark VI supports TMR (Triple Modular Redundancy) — order in sets of 3 for redundant configurations.
Quality Assurance & Sourcing
- All IS210AEDBH4A units sourced by Konmask.com undergo visual inspection, functional bench testing, and serialization verification
- Supplied with anti-static packaging and full documentation
- Traceability records available upon request for regulated industries
- Warranty: 12 months from date of shipment
- Counterfeit-prevention: We source exclusively from verified industrial surplus channels and authorized distributors
How to Order
- Online: Add to cart directly on this page — stock availability shown in real time
- Email RFQ: support@konmask.com — include your system generation, quantity, and required delivery date
- Phone/WhatsApp: +0086 19859288691
- Lead Time: In-stock orders ship within 1–3 business days; sourced orders 5–15 business days
- Export: We ship worldwide with full export documentation (commercial invoice, packing list, COO)
Replacement & Compatibility FAQ
Q: Can IS210AEDBH3A replace IS210AEDBH4A directly?
A: In most Mark VI configurations, yes — H3A and H4A share the same pinout. However, H4A includes circuit improvements; we recommend upgrading to H4A when possible.
Q: Is IS210AEDBH4A compatible with Mark VIe?
A: Partial compatibility exists. Mark VIe uses IS215-series cards as primary. IS210AEDBH4A may function in hybrid cabinets — verify with your GE system engineer.
Q: What is the difference between IS210AEDBH4A and IS215AEDBH4A?
A: IS215 is the Mark VIe generation with enhanced diagnostics and Ethernet redundancy. IS210 is the Mark VI generation. They are not interchangeable without system-level validation.
Q: Do you supply tested/refurbished units?
A: Yes. All refurbished units are clearly labeled and bench-tested. New surplus and refurbished options are available — contact us for pricing.
Q: Can I return a card if it doesn’t fit my system?
A: Yes, within 30 days of receipt, provided the card is uninstalled and in original condition. See our returns policy for details.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
