GE IS210BPPBH2BMD (IS210BPPBH2BLD) BOP Processor Card | Replacement, Equivalent & Selection Guide
The GE IS210BPPBH2BMD (also referenced as IS210BPPBH2BLD) is a Balance of Plant (BOP) Processor Card designed for GE Mark VI turbine control systems. This card serves as the primary processing unit for BOP I/O management, enabling reliable communication and control across distributed turbine automation architectures. At Konmask.com, we specialize in sourcing, verifying, and supplying this module for MRO, retrofit, and system expansion projects.
Technical Specifications
- Part Number: IS210BPPBH2BMD / IS210BPPBH2BLD
- Manufacturer: GE (General Electric)
- Series: Mark VI Turbine Control System
- Function: Balance of Plant (BOP) Processor Card
- Form Factor: VME-based plug-in card
- Communication: IONet Ethernet-based I/O network
- Operating Voltage: 5 VDC (backplane supplied)
- Operating Temperature: 0°C to 60°C
- Compatibility: GE Mark VI / Mark VIe control cabinets
- Weight: Approx. 80 g
- Condition Available: New, Refurbished, Tested
Compatible Replacement & Equivalent Models
When the IS210BPPBH2BMD is unavailable or end-of-life, the following models may serve as direct or functional replacements depending on firmware revision and cabinet configuration:
- IS210BPPBH2AMD – Earlier hardware revision; verify firmware compatibility before substitution
- IS210BPPBH2CMD – Later revision with enhanced diagnostics; drop-in compatible in most Mark VI cabinets
- IS210BPPBH1BMD – Single-redundancy variant; suitable for non-TMR applications
- IS215BPPBH2B – Mark VIe series equivalent; requires IONet configuration update
- DS200BPPBG1A – Legacy Mark V BOP processor; not pin-compatible, requires adapter bracket
Always verify part revision, firmware version, and cabinet slot assignment before substitution. Contact Konmask.com for cross-reference validation.
Why Choose the Original Model
- Proven Field Reliability: IS210BPPBH2BMD has an extensive installed base in gas turbine and steam turbine BOP applications worldwide.
- OEM Firmware Alignment: Original hardware ensures full compatibility with GE Toolbox configuration software without revision conflicts.
- TMR Support: Supports Triple Modular Redundancy (TMR) architecture for safety-critical BOP loops.
- Reduced Commissioning Risk: No re-parameterization required when replacing like-for-like in existing Mark VI cabinets.
- Long-Term Spare Strategy: Stocking original part numbers reduces unplanned downtime risk in aging Mark VI fleets.
Typical Applications
- Gas turbine Balance of Plant control (fuel, cooling, lube oil, inlet systems)
- Steam turbine auxiliary system automation
- Combined cycle power plant BOP I/O management
- Compressor station control panel integration
- Offshore platform turbine control retrofit projects
- Industrial co-generation plant Mark VI upgrades
System Compatibility
- Control System: GE Mark VI, Mark VIe (with configuration update)
- Cabinet Type: VCMI, VCRC, VTUR, VAUX enclosures
- Software: GE Toolbox (ToolboxST) v04.x and above
- Network: IONet (100 Mbps Ethernet-based I/O network)
- Redundancy: TMR (Triple Modular Redundancy) and Simplex configurations
- I/O Packs: Compatible with IS200, IS210, IS215 series I/O terminal boards
Selection Guide
Use the following criteria to select the correct BOP Processor Card for your application:
- Step 1 – Identify System Generation: Confirm whether your system is Mark VI or Mark VIe. IS210BPPBH2BMD is native to Mark VI; Mark VIe may require IS215 series.
- Step 2 – Check Redundancy Mode: TMR systems require three identical cards per controller. Simplex systems use one. Confirm slot assignment (R, S, T).
- Step 3 – Verify Hardware Revision: Match the suffix (e.g., H2B = hardware rev 2B). Mixing revisions within a TMR set is not recommended.
- Step 4 – Confirm Firmware Version: Request the current Toolbox project file revision from your controls engineer to ensure firmware compatibility.
- Step 5 – Evaluate Condition: For critical applications, specify New or Factory-Refurbished. For budget MRO, Tested-Used with warranty is acceptable.
Quality Assurance & Sourcing
- All units sourced through verified industrial surplus and authorized distribution channels
- 100% functional test performed prior to shipment (power-on, communication, I/O verification)
- Anti-static packaging with humidity indicator card
- Certificate of conformance and test report available on request
- Traceability documentation provided for critical power generation applications
- 12-month warranty on refurbished units; 24-month on new stock
How to Order
- Online: Add to cart directly on this page — specify required condition (New / Refurbished / Tested)
- Email: Send your BOM or part number list to support@konmask.com
- Phone/WhatsApp: +0086 19859288691 — quote reference IS210BPPBH2BMD
- Bulk / Project Orders: Request a formal quotation with lead time and condition grade
- Expedite: Same-day shipping available for in-stock units — contact us before 14:00 CST
Replacement & Compatibility FAQ
Q: Is IS210BPPBH2BLD the same as IS210BPPBH2BMD?
A: Yes. The suffix difference (BLD vs BMD) typically reflects a minor label or documentation revision. Functionally these are the same card. Always confirm with your GE Toolbox project file.
Q: Can I use IS210BPPBH2CMD as a direct replacement?
A: In most cases yes, as the CMD revision is backward compatible. However, verify that your Toolbox version supports the newer hardware revision before installation.
Q: Do you supply tested-used units with warranty?
A: Yes. All tested-used units carry a 12-month warranty and include a functional test report. Traceability documentation is available on request.
Q: What is the lead time for new stock?
A: In-stock units ship within 1–3 business days. For new OEM stock, lead time is typically 4–8 weeks. Contact us for current availability.
Q: Can this card be used in a Mark VIe system?
A: With appropriate IONet configuration updates in ToolboxST, IS210BPPBH2BMD can operate in Mark VIe environments. We recommend consulting your GE controls engineer before substitution.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
