Genuine Honeywell CC-TAON01 51306519-175 Analog Output Module | Experion Series – Verified Source
The Honeywell CC-TAON01 (part number 51306519-175) is a critical Analog Output module within the Experion PKS / TDC 3000 Distributed Control System ecosystem — a platform that underpins safety-critical operations in refining, petrochemical, power generation, and advanced manufacturing worldwide. Due to its long service life and the high cost of system downtime, this module is frequently targeted by counterfeit and refurbished-as-new supply chains. Buyers sourcing from unverified distributors risk receiving modules with degraded signal accuracy, failed self-diagnostics, or mismatched firmware revisions that can cause costly process upsets.
At Konmask, every CC-TAON01 unit we supply is sourced exclusively through verified, traceable channels and subjected to our documented 4-step quality verification process before dispatch. We issue a Certificate of Conformance (COC) with every shipment and can provide third-party test reports, packing list photos, and Country of Origin (COO) declarations on request. Our commitment to genuine, verified, authentic supply is the foundation of every transaction — not an afterthought.
Technical Specifications
- Part Number: CC-TAON01 / 51306519-175
- Manufacturer: Honeywell (Honeywell)
- Module Type: Analog Output (AO)
- Compatible Platform: Experion PKS, TDC 3000, PlantScape
- Output Channels: 8 channels (4–20 mA current output)
- Output Range: 4–20 mA (HART-compatible)
- Resolution: 12-bit D/A conversion
- Accuracy: ±0.1% of full scale
- Loop Compliance Voltage: Up to 750 Ω load
- Power Supply: Supplied via C200/C300 controller backplane
- Communication: FTE (Fault Tolerant Ethernet) backplane bus
- Isolation: Channel-to-channel and channel-to-backplane isolation
- Operating Temperature: 0°C to 60°C
- Humidity: 5% to 95% RH, non-condensing
- Certifications: CE, UL, FM, ATEX (zone 2 rated)
- Form Factor: I/O module, hot-swappable
- Weight: Approx. 300 g
Specifications verified against Honeywell official documentation and Experion PKS I/O Module Reference Manual.
Our 4-Step Quality Verification Process
- Step 1 — Source Traceability Audit: Every unit is traced to its original manufacturer batch or authorized distribution channel. We verify lot codes, date codes, and packaging integrity against Honeywell factory standards before acceptance into our inventory.
- Step 2 — Physical & Visual Inspection: Trained technicians inspect PCB markings, label authenticity, connector pin condition, and housing integrity. Any unit showing signs of re-labeling, sanding, or non-OEM components is immediately quarantined and rejected.
- Step 3 — Functional Bench Test: Each CC-TAON01 is powered up on a compatible Experion backplane and all 8 analog output channels are verified for signal accuracy (±0.1% FS), HART communication response, and self-diagnostic pass status. Test data is logged and available on request.
- Step 4 — Documentation Package Preparation: Prior to shipment, we prepare a full documentation package including: Certificate of Conformance (COC), functional test report, high-resolution packing photos, and COO Declaration. Customers may request these documents before or after purchase.
Key Features & Benefits
- 8-Channel 4–20 mA Output: Provides high-density analog control for valve positioners, variable-speed drives, and field instruments in a single hot-swappable module.
- HART Protocol Support: Enables two-way digital communication over the 4–20 mA loop, compliant with HART Communication Foundation standard HCF_SPEC-12, allowing remote device configuration and diagnostics without loop interruption.
- Hot-Swap Capability: Modules can be replaced under power without system shutdown, meeting IEC 61511 SIL-rated process availability requirements for continuous operations.
- 12-Bit Resolution D/A Conversion: Delivers fine-grained output control critical for precision dosing, flow control, and pressure regulation in process industries.
- Integrated Self-Diagnostics: Continuous background diagnostics detect open-loop, over-range, and hardware fault conditions, reporting status to the Experion operator station in real time per ISA-5.1 instrumentation standards.
- Fault-Tolerant Backplane Communication: FTE dual-redundant communication architecture ensures module data integrity even under single-path network failure, supporting high-availability plant architectures.
Typical Applications
- Oil & Gas Refining: Analog setpoint control for crude distillation column reflux valves and fired heater fuel gas control valves.
- Petrochemical Plants: Reactor temperature and pressure loop output control in ethylene cracker and polymer production units.
- Power Generation: Turbine governor and boiler feedwater control valve positioning in combined-cycle and coal-fired power stations.
- Pulp & Paper: Digester pressure and consistency control in continuous cooking systems requiring tight analog output stability.
- Pharmaceutical Manufacturing: Bioreactor agitation speed and nutrient dosing control in GMP-regulated batch and fed-batch processes.
- Water & Wastewater Treatment: Chemical dosing pump speed control and effluent flow regulation in municipal and industrial treatment facilities.
Compatible System Components
- Honeywell C200 / C300 Process Controllers
- Experion PKS IOLINK Modules (CC-LINK series)
- Honeywell 51305349-175 / CC-TAIX01 Analog Input Modules
- Experion FTE Network Interface Cards
- Honeywell 51304485-150 Power Distribution Modules
- Experion PKS R500 / R501 / R511 Software Platforms
- Honeywell Universal I/O Termination Assemblies (CC-TAIX11 series)
Global Sourcing & Shipping Capabilities
- Primary Service Regions: Mainland China, Southeast Asia (Vietnam, Thailand, Indonesia, Malaysia), Middle East (UAE, Saudi Arabia, Kuwait), Europe (Germany, Netherlands, Poland), and North America (USA, Canada).
- Packaging Standard: Anti-static ESD bag + foam-lined carton + moisture-barrier outer packaging. All units are individually bubble-wrapped and secured to prevent transit damage. Packing photos provided with every shipment.
- Logistics Options: DHL Express (3–5 days), FedEx International Priority, sea freight LCL/FCL for bulk orders, and China Post registered air mail for budget-sensitive shipments.
- Export Documentation: Commercial invoice, packing list, COO declaration, and COC issued as standard. Additional customs documentation (Form E, EUR.1) available on request for preferential tariff eligibility.
- Lead Time: In-stock units ship within 1–3 business days. Pre-order or sourcing requests fulfilled within 7–15 business days depending on availability.
Certifications & Compliance Statement
- CE Marking (EMC Directive 2014/30/EU & Low Voltage Directive 2014/35/EU)
- UL Listed (UL 508 Industrial Control Equipment)
- FM Approved (Factory Mutual — Hazardous Location)
- ATEX Zone 2 Rated (II 3 G Ex nA IIC T4 Gc)
- RoHS Compliant (Directive 2011/65/EU)
- ISO 9001:2015 Supply Chain Quality Management
Konmask Quality Commitment: Konmask.com operates under a strict no-counterfeit, no-refurbished-as-new policy. All products are supplied with full traceability documentation. If any unit fails to match its stated specifications upon receipt, we provide a full replacement or refund — no questions asked. Our quality assurance process is documented, auditable, and available for customer review.
How to Order
- Step 1 — Confirm Your Requirement: Add to cart directly, or contact us at support@konmask.com with your part number, required quantity, and destination country. We respond within 24 hours on business days.
- Step 2 — Receive Quotation & Documentation Preview: We will provide a formal quotation, stock confirmation, and — upon request — a pre-shipment documentation preview including COC and test report summary.
- Step 3 — Place Order & Ship: Confirm payment via your preferred method (T/T bank transfer, PayPal, credit card). We dispatch within 1–3 business days and provide tracking information immediately upon shipment.
Sample & Test Report Policy: For first-time buyers or large-volume orders, we can arrange a sample unit with full test report prior to bulk commitment. Contact us to discuss terms.
Authenticity & Trust FAQ
-
Q: How can I verify the module I receive is genuine Honeywell?
A: Every unit ships with a Certificate of Conformance (COC) referencing the original manufacturer lot code and date code. You can cross-reference the label markings against Honeywell’s official part number format. We also provide high-resolution pre-shipment photos of the actual unit upon request, so you can inspect it before it leaves our facility. -
Q: What is your warranty policy?
A: All CC-TAON01 modules supplied by Konmask carry a 12-month warranty against manufacturing defects and functional failure under normal operating conditions. If a unit fails within the warranty period, we will replace it or issue a full refund — including return shipping costs for verified defective units. -
Q: Can you provide a third-party test report or functional test data?
A: Yes. We can provide our internal functional test report (channel-by-channel output accuracy data, HART response log, and self-diagnostic pass record) for any unit prior to or after shipment. For high-value or safety-critical applications, we can also arrange third-party laboratory verification. Contact support@konmask.com to request documentation.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
