Honeywell 51304481-100 Low Level Analog Input Module | Replacement, Equivalent & Selection Guide
The Honeywell 51304481-100 is a Low Level Analog Input Module designed for use within Honeywell’s TDC 3000 / TotalPlant Solution (TPS) distributed control systems. It provides precision low-level signal conditioning for thermocouples, RTDs, and millivolt sources in demanding process automation environments. This page covers technical specifications, compatible replacements, selection guidance, and sourcing information to help engineers and procurement teams make confident decisions.
Technical Specifications
- Part Number: 51304481-100
- Manufacturer: Honeywell Process Solutions
- Module Type: Low Level Analog Input Module (LLAI)
- Compatible Platform: Honeywell TDC 3000 / TPS / HPM
- Input Types: Thermocouple (J, K, T, E, R, S, B), RTD (Pt100), mV signals
- Number of Channels: 8 channels (isolated)
- Input Range: Low-level millivolt signals (typically –10 mV to +75 mV)
- Resolution: 16-bit A/D conversion
- Isolation: Channel-to-channel and channel-to-bus isolation
- Communication: Honeywell UCN / IOP bus interface
- Power Supply: Supplied via backplane (no external power required)
- Operating Temperature: 0°C to 60°C
- Weight: Approx. 140 g
- Form Factor: Single-slot card module
- Certifications: CE, UL (refer to Honeywell datasheet for full listing)
Compatible Replacement & Equivalent Models
When the 51304481-100 is unavailable or end-of-life, the following models may serve as functional equivalents or drop-in replacements depending on your system revision. Always verify firmware and backplane compatibility before substitution.
- 51304481-150 – Revised revision of the same LLAI module; enhanced noise immunity. Direct replacement in most HPM configurations.
- 51304481-200 – Later revision with extended temperature tolerance. Confirm IOP firmware version compatibility.
- 51309276-175 – Honeywell LLAI module for TPS systems; functionally equivalent with minor firmware differences.
- 51304485-100 – High Level Analog Input (HLAI) module; suitable only if signal conditioning is moved upstream.
- Third-party equivalents: Some certified DCS integrators offer remanufactured or compatible LLAI cards. Contact Konmask for vetted alternatives.
Note: Konmask.com recommends using original Honeywell modules for safety-critical loops. Replacements should be validated by a qualified DCS engineer.
Why Choose the Original Model
- Guaranteed Compatibility: Factory-tested for seamless integration with Honeywell TDC 3000 / TPS / HPM platforms without firmware conflicts.
- Precision Signal Integrity: Purpose-built low-level signal conditioning minimizes noise and drift in thermocouple and RTD measurements.
- Long-Term Support: Honeywell’s installed base ensures continued availability of spare parts and technical documentation.
- Regulatory Compliance: Meets process industry safety and EMC standards out of the box.
- Reduced Commissioning Risk: No re-engineering or reconfiguration required when replacing like-for-like.
Typical Applications
- Oil & gas refining – temperature monitoring on distillation columns and reactors
- Petrochemical plants – thermocouple input for heat exchanger control loops
- Power generation – boiler and turbine temperature measurement
- Pulp & paper – process temperature and RTD signal acquisition
- Pharmaceutical manufacturing – validated temperature monitoring in GMP environments
- Chemical processing – multi-point low-level signal aggregation in HPM cabinets
System Compatibility
- DCS Platform: Honeywell TDC 3000, TotalPlant Solution (TPS), Hybrid Control Manager (HCM)
- Controller: High-Performance Process Manager (HPM)
- Bus: Universal Control Network (UCN), IOP bus
- Backplane: Standard HPM I/O link backplane (verify slot assignment)
- Firmware: Compatible with HPM firmware R500 and above (confirm with Honeywell release notes for later revisions)
- Engineering Tools: Honeywell Control Builder, Station configuration utilities
Selection Guide
Use the following criteria to confirm the 51304481-100 is the right module for your application:
- Signal Type: Required for thermocouple, RTD, or low-level mV inputs (<75 mV). For 4–20 mA or 1–5 V signals, select an HLAI module instead.
- Channel Count: 8 isolated channels per module. Calculate total channel requirements and number of slots accordingly.
- Platform Version: Confirm your HPM firmware and IOP revision support this module part number.
- Redundancy: For critical loops, consider pairing with a redundant HPM configuration.
- Environment: Standard industrial rating (0–60°C). For harsh environments, evaluate enclosure requirements separately.
- Revision: Specify -100, -150, or -200 suffix based on your system’s validated revision list.
Quality Assurance & Sourcing
- All modules sourced by Konmask.com undergo visual inspection, functional verification, and anti-counterfeit screening prior to dispatch.
- Units are supplied with original Honeywell labeling and traceable lot documentation where available.
- Refurbished units (where applicable) are clearly identified and include a 90-day functional warranty.
- New surplus and factory-new stock available — specify your preference at time of inquiry.
- Export compliance: We handle HTS classification and export documentation for international shipments.
How to Order
- Step 1: Confirm part number: 51304481-100 (specify revision suffix if required).
- Step 2: Indicate quantity and required delivery timeline.
- Step 3: Submit your inquiry via the product page or contact us directly.
- Step 4: Receive quotation with lead time, condition (new/refurbished/surplus), and shipping options.
- Step 5: Confirm order and receive tracking information upon dispatch.
📧 support@konmask.com | 📞 +0086 19859288691
Replacement & Compatibility FAQ
Q: Can I use the 51304481-150 as a direct replacement for the 51304481-100?
A: In most HPM configurations, yes. The -150 revision offers enhanced noise immunity and is backward compatible. Verify with your Honeywell system documentation before installation.
Q: Is the 51304481-100 compatible with Experion PKS?
A: This module is designed for TDC 3000 / TPS / HPM platforms. Experion PKS uses a different I/O architecture (Series C / CHARM). It is not directly compatible.
Q: What is the difference between LLAI and HLAI modules?
A: LLAI (Low Level Analog Input) modules handle small-signal sources such as thermocouples and RTDs (millivolt range). HLAI (High Level Analog Input) modules handle standard process signals such as 4–20 mA or 1–5 V. Selecting the wrong type will result in incorrect readings or module faults.
Q: Do you supply tested/refurbished units?
A: Yes. Konmask.com offers new surplus, factory-new, and tested refurbished units. Condition is clearly stated on each order confirmation.
Q: How long does shipping take?
A: Domestic (China): 2–5 business days. International: 5–15 business days depending on destination and customs clearance. Express options available on request.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691




