Honeywell MC-TAOX12 51304335-125 Analog Output Board | Replacement, Equivalent & Selection Guide
The Honeywell MC-TAOX12 (P/N 51304335-125) is a 12-channel analog output board designed for use in Honeywell’s Experion PKS and TDC 3000 distributed control systems. It provides precision 4–20 mA current loop outputs for field device control in process automation environments. This page serves as a comprehensive selection, replacement, and compatibility reference for procurement engineers and system integrators.
Technical Specifications
- Part Number: MC-TAOX12 / 51304335-125
- Manufacturer: Honeywell Process Solutions
- Module Type: Analog Output Board
- Output Channels: 12 channels
- Output Signal: 4–20 mA current loop
- Resolution: 12-bit D/A conversion
- Isolation: Channel-to-channel and channel-to-bus isolation
- Compatible Platform: Honeywell Experion PKS, TDC 3000, PlantScape
- Backplane Interface: C200 / C300 controller series
- Operating Temperature: 0°C to 60°C
- Power Supply: Supplied via backplane (24 VDC)
- Weight: 520 g
- Certifications: CE, UL (refer to Honeywell datasheet for full listing)
Compatible Replacement & Equivalent Models
The following models are commonly evaluated as functional replacements or equivalents for the MC-TAOX12 51304335-125. Always verify firmware revision, backplane slot compatibility, and system configuration before substitution:
- Honeywell 51304335-150 — Revised revision of the same board; pin-compatible in most C200/C300 chassis
- Honeywell MC-TAOX12 51304335-100 — Earlier revision; functionally equivalent, verify firmware compatibility
- Honeywell 51309276-175 (LLMUX AO) — Alternative AO module for TDC 3000 environments with different channel density
- Honeywell 51401491-100 — Analog Output FTA (Field Termination Assembly) companion; not a direct replacement but often sourced together
- Third-party compatible boards — Some certified aftermarket suppliers offer drop-in replacements; contact Konmask for vetted options
Note: Konmask.com does not guarantee interchangeability. Always validate against your system’s engineering documentation and Honeywell’s compatibility matrix.
Why Choose the Original Model
- OEM-certified performance: Factory-calibrated to Honeywell’s tight accuracy specifications
- Full system integration: Recognized natively by Experion PKS configuration tools (Control Builder)
- Firmware traceability: Revision-controlled firmware ensures predictable behavior across system upgrades
- Long-term support: Honeywell provides extended lifecycle support for installed base modules
- Reduced commissioning risk: No re-engineering or re-certification required when using original P/N
Typical Applications
- Control valve positioner command signals (4–20 mA)
- Variable frequency drive (VFD) speed reference output
- Analog setpoint transmission to field instruments
- Regulatory control loops in oil & gas, refining, and chemical processing
- Power generation plant DCS analog output expansion
- Pharmaceutical batch process control systems
System Compatibility
- Honeywell Experion PKS (R310 and above recommended)
- Honeywell TDC 3000 (with appropriate FTA and cabling)
- Honeywell PlantScape (legacy installations)
- C200 / C300 Controller Chassis — standard I/O backplane slot
- IOLIM / IOTA termination assemblies — verify FTA model against channel count
Not compatible with Honeywell Safety Manager, FSC, or ControlEdge series without hardware adaptation.
Selection Guide
Use the following criteria to confirm the MC-TAOX12 51304335-125 is the correct module for your application:
- Step 1 — Platform check: Confirm your DCS is Experion PKS or TDC 3000 with C200/C300 controllers
- Step 2 — Channel count: Verify you require 12 AO channels per slot; if fewer, consider a 4- or 8-channel variant to reduce cost
- Step 3 — Signal type: Confirm field devices accept 4–20 mA current loop (not voltage output)
- Step 4 — Revision alignment: Match the firmware revision (-125 suffix) to your existing installed base to avoid mixed-revision issues
- Step 5 — FTA pairing: Identify the correct Field Termination Assembly (FTA) for your cabinet wiring scheme
- Step 6 — Spare vs. active: For cold-spare procurement, original P/N is strongly recommended; for active replacement, verify with a Honeywell-certified integrator
Quality Assurance & Sourcing
- All modules sourced by Konmask.com undergo visual inspection and functional verification prior to shipment
- Original factory packaging preserved where available; anti-static packaging used for all shipments
- Traceability documentation (COC, test records) available upon request
- Modules are sourced from authorized distributors, OEM surplus, and certified refurbishers
- Warranty: 12 months from date of shipment (see full terms at Konmask.com/warranty)
How to Order
- Online: Add to cart directly from this page
- Email RFQ: Send part number, quantity, and required delivery to support@konmask.com
- Phone/WhatsApp: +0086 19859288691
- Lead time: In-stock items ship within 1–3 business days; ex-stock lead time quoted per order
- Payment: T/T, PayPal, credit card, and trade terms available for qualified accounts
- Export: We ship worldwide; export documentation and customs support available
Replacement & Compatibility FAQ
Q: Can I use the 51304335-150 revision in place of the 51304335-125?
A: In most cases yes, but you must verify that your Experion PKS version supports the -150 revision firmware. Check Honeywell’s compatibility matrix or contact your system integrator.
Q: Is the MC-TAOX12 hot-swappable?
A: Hot-swap capability depends on your chassis configuration and Experion PKS version. Refer to Honeywell’s I/O module installation guide for your specific platform.
Q: Do you supply the matching FTA (Field Termination Assembly)?
A: Yes. Contact us with your cabinet wiring scheme and we will identify and quote the correct FTA model.
Q: What is the difference between MC-TAOX12 and MC-TAOY22?
A: The MC-TAOX12 provides 12-channel 4–20 mA current output; the MC-TAOY22 is a different I/O type. Confirm your I/O list before ordering.
Q: Can Konmask provide a certificate of conformance?
A: Yes. COC and inspection reports are available upon request at no additional charge.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






