Process Control & HART Signal Solution — Honeywell 8C-PAIM01 | Experion PKS Series
Where This Product Is Used
The Honeywell 8C-PAIM01 Analog Input Module is a core field I/O component in the Experion PKS (Process Knowledge System) distributed control architecture. It is deployed across high-reliability process industries where accurate analog signal acquisition is mission-critical:
- Oil & Gas Upstream/Midstream: Wellhead pressure and flow monitoring, pipeline SCADA integration, separator level control
- Petroleum Refining: Crude distillation unit (CDU) temperature profiling, reactor feed flow measurement, fractionator pressure loops
- Petrochemical & Chemical Plants: Reactor temperature and pressure acquisition, feed ratio control, batch process monitoring
- LNG & Gas Processing: Cryogenic temperature measurement, compressor surge control, heat exchanger duty monitoring
- Power Generation: Boiler drum level, turbine inlet temperature, feedwater flow measurement
- Pulp & Paper / Mining: Digester pressure, slurry density, mill process variable acquisition
Wherever a C300 Controller or EPKS chassis requires reliable 4–20 mA or HART field device connectivity, the 8C-PAIM01 is the specified module.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 8C-PAIM01 |
| Manufacturer | Honeywell Process Solutions |
| Series | Experion PKS / C300 Series |
| Module Type | Analog Input (AI) |
| Channel Count | 8 Channels |
| Input Signal Range | 4–20 mA (with HART protocol support) |
| HART Communication | Yes — per-channel HART pass-through |
| Input Resolution | 16-bit ADC |
| Isolation | Channel-to-channel and channel-to-bus isolation |
| Power Consumption | Per Experion PKS chassis specification |
| Operating Temperature | 0°C to 60°C (32°F to 140°F) |
| Mounting | Experion PKS I/O chassis (Series C) |
| Certifications | CE, UL, FM (refer to Honeywell datasheet) |
| Weight | Approx. 300 g |
Why Engineers Specify This Model
- Native HART Integration: Each channel supports HART pass-through, enabling device diagnostics, secondary variables, and asset management without additional multiplexers
- High-Density I/O: 8 channels per module reduces chassis slot consumption and lowers installed cost per point in large-scale DCS projects
- Seamless Experion PKS Compatibility: Plug-and-play with C300 Controller and Experion R4xx/R5xx software — no custom configuration drivers required
- Redundancy Support: Compatible with Honeywell’s fault-tolerant I/O architecture for SIL-rated and high-availability loops
- Proven Field Reliability: Widely deployed in tier-1 refinery and petrochemical DCS projects globally; long product lifecycle with Honeywell support
- Diagnostic Transparency: Module-level and channel-level diagnostics surfaced directly in Experion Station for rapid fault isolation
Complete System Bill of Materials
The 8C-PAIM01 operates within the Experion PKS C-Series I/O subsystem. A typical analog input node includes:
- Honeywell 8C-PAIM01 — Analog Input Module (this item)
- Honeywell C300 Controller (51309276-175 or equivalent)
- Experion PKS I/O Chassis (8-slot or 16-slot)
- Honeywell IOTA / Field Termination Assembly (FTA) for AI — e.g., 51304485-150
- Honeywell Power Supply Module (51401095-100 or equivalent)
- Shielded twisted-pair field wiring (per ISA-5.1 standard)
- Honeywell Experion PKS R500+ software license (for HART asset management)
Compliance & Industry Standards
- IEC 61511 / ISA-84: Compatible with SIL-rated safety instrumented system architectures when used with appropriate SIS design
- HART Communication Foundation: HART 5/6/7 protocol compliant per-channel
- CE Marking: Compliant with EU EMC and Low Voltage Directives
- UL Listed: Industrial control equipment listing
- ISA-5.1: Instrumentation signal and alarm standards
- RoHS: Compliant with EU Directive 2011/65/EU on hazardous substances
Quality Assurance & Sourcing
At Konmask.com, every Honeywell 8C-PAIM01 unit is subject to our industrial-grade sourcing and QA protocol:
- ✅ Authentic Origin: Sourced from authorized Honeywell distributors or verified surplus channels with full traceability
- ✅ Pre-shipment Functional Test: Each module is bench-tested for channel continuity, communication handshake, and firmware version verification
- ✅ Visual & Physical Inspection: Connector integrity, PCB condition, label legibility, and housing checked against OEM specification
- ✅ Anti-static Packaging: Shipped in ESD-safe bags with foam cushioning and moisture barrier
- ✅ Documentation: Certificate of conformance and test report available upon request
How to Source This Part
Konmask.com maintains stock of Honeywell Experion PKS modules for immediate dispatch. To order or inquire:
- 📧 Email: support@konmask.com
- 📞 Phone/WhatsApp: +0086 19859288691
- 🌐 Online: Add to cart directly on this page for standard lead times
- 💼 Bulk / Project Orders: Contact us for BOM-level quotation, volume pricing, and expedited shipping options
- 🔄 Exchange Program: Core exchange available for select Honeywell modules — inquire for eligibility
Application-Specific FAQ
Q: Is the 8C-PAIM01 compatible with Experion PKS R500 and later releases?
A: Yes. The module is supported across Experion PKS R400 through R500+ software releases. Confirm firmware compatibility with your site’s Experion version before installation.
Q: Can this module be used in a Safety Instrumented System (SIS)?
A: The 8C-PAIM01 is a standard DCS I/O module. For SIL-rated SIS applications, Honeywell’s Safety Manager or FSC platform with dedicated SIL-certified I/O is required.
Q: Does each channel support independent HART communication?
A: Yes. Each of the 8 channels supports individual HART pass-through, allowing simultaneous device diagnostics and secondary variable reading without channel conflicts.
Q: What is the difference between 8C-PAIM01 and other Honeywell AI modules?
A: The 8C-PAIM01 is specifically designed for the C-Series Experion PKS chassis. It differs from legacy TDC-3000 or PlantScape modules in backplane interface, firmware, and HART capability. Ensure chassis compatibility before substitution.
Q: Can Konmask provide a test report or certificate of conformance?
A: Yes. Documentation is available upon request for all units shipped from Konmask.com.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691







