Honeywell CC-PAON01 – 8-Channel Analog Output Module | Experion PKS C300 Platform
Engineering Background
The Honeywell Experion PKS (Process Knowledge System) is one of the world’s most widely deployed distributed control systems in refining, petrochemical, power generation, and advanced manufacturing. The C300 Controller series forms the backbone of this architecture, and the CC-PAON01 (Part No. 51410070-175) is the certified analog output personality module designed to interface directly with C300 controller nodes via the Series C I/O subsystem.
Product Positioning
The CC-PAON01 is a process-critical component used by instrumentation and control engineers to drive field devices — control valves, positioners, variable-speed drives, and current-loop actuators — with precision 4–20 mA signals. It pairs with the CC-TAON01 terminal assembly (FTA) for field wiring termination, forming a complete, certified I/O channel pair. Konmask.com supplies this module as verified OEM hardware, sourced from decommissioned or surplus industrial assets, with full traceability documentation available on request.
Complete Technical Specifications
| Part Number | CC-PAON01 |
| Honeywell P/N | 51410070-175 |
| FTA Companion | CC-TAON01 |
| Platform | Honeywell Experion PKS – Series C I/O |
| Controller Compatibility | C300 Controller (CC-PCF901 / CC-PCF902) |
| Module Type | Analog Output Personality Module (PAON) |
| Output Channels | 8 channels, isolated |
| Output Signal | 4–20 mA (current loop) |
| Output Resolution | 16-bit DAC |
| Load Drive Capability | Up to 750 Ω per channel |
| HART Support | HART-ready via CC-TAON01 FTA (with HART multiplexer) |
| Isolation | Channel-to-channel and channel-to-bus isolation |
| Operating Temperature | 0°C to +60°C |
| Storage Temperature | -40°C to +85°C |
| Humidity | 5% to 95% RH, non-condensing |
| Power Consumption | Supplied via C300 I/O bus backplane |
| Mounting | Series C I/O Carrier / Chassis |
| Wiring Termination | Via CC-TAON01 FTA (field termination assembly) |
| Approvals | CE, UL, cUL (per Honeywell Experion PKS certification) |
| Weight | Approx. 200 g |
| Country of Origin | United States |
Proven Application Environments
- Petroleum Refining: Control valve positioning for crude distillation, hydrotreating, and FCC units
- Petrochemical Plants: Reactor feed control, compressor anti-surge loops, and column reflux management
- Power Generation: Turbine governor output, boiler feed water control, and burner management systems
- Pulp & Paper: Stock flow control, headbox pressure regulation, and dryer section management
- Pharmaceutical Manufacturing: Bioreactor agitation speed, temperature jacket control, and clean-in-place (CIP) valve actuation
- LNG / Gas Processing: Compressor recycle valve control and separator level management
Engineering Advantages
- High-Resolution Output: 16-bit DAC ensures sub-0.01% full-scale resolution, critical for tight PID loop performance
- Full Channel Isolation: Eliminates ground loops and cross-channel interference in multi-loop installations
- Hot-Swap Capable: Supports online module replacement without process shutdown when used with redundant C300 architecture
- HART Transparency: Passes HART communication to field devices via FTA, enabling asset management and diagnostics without additional wiring
- Integrated Diagnostics: Continuous self-test and open-wire detection with alarm reporting to Experion Station
- Compact Density: 8 channels per module slot maximizes cabinet space utilization in brownfield expansions
System Architecture & Signal Flow
The CC-PAON01 plugs into a Series C I/O carrier mounted in the C300 controller cabinet. The C300 controller communicates with the module over the high-speed C-Bus backplane. The module converts digital setpoint values from the controller into precision 4–20 mA current signals. Field wiring connects at the CC-TAON01 FTA, which is mounted on a separate marshalling panel and linked to the personality module via a pre-wired cable assembly. This FTA-based architecture separates field wiring from the control electronics, simplifying maintenance and reducing commissioning time.
Signal Path: C300 Controller → C-Bus Backplane → CC-PAON01 → FTA Cable → CC-TAON01 → Field Device (Control Valve / Actuator)
Sourcing & Quality Verification
- All CC-PAON01 units supplied by Konmask.com are inspected for physical integrity, connector condition, and firmware label verification prior to shipment
- Units are sourced from decommissioned plant upgrades, certified system integrators, and authorized surplus channels
- Traceability documentation (original plant records, decommission certificates) available upon request for regulated industries
- Packaging: ESD-safe anti-static bag + foam-lined carton; suitable for international air and sea freight
- Lead time: In-stock units ship within 1–3 business days; sourced units 5–15 business days
Procurement Process
- Confirm Compatibility: Verify your C300 controller firmware revision and Series C I/O carrier part number against Honeywell’s compatibility matrix
- Specify FTA Requirement: Confirm whether CC-TAON01 FTA and cable assembly are required (sold separately or as a kit)
- Request Quote: Contact [email protected] with quantity, required delivery date, and destination port
- Order Confirmation: Pro-forma invoice issued within 24 hours; payment via T/T, PayPal, or trade finance
- Shipment & Documentation: Commercial invoice, packing list, and optional COO certificate provided for customs clearance
Technical FAQ
Q: Can the CC-PAON01 be used with the C200 or C200E controller?
A: No. The CC-PAON01 is designed exclusively for the C300 Series C I/O architecture. C200/C200E systems use a different I/O bus and require separate module families (e.g., MC-PAOY22).
Q: Is the CC-TAON01 FTA included?
A: The CC-TAON01 FTA is listed separately. Please specify at time of order if you require the complete channel pair (CC-PAON01 + CC-TAON01 + cable).
Q: Does this module support HART pass-through?
A: Yes, when paired with the CC-TAON01 FTA and a HART multiplexer, HART communication is fully supported for asset management via Honeywell’s Field Device Manager (FDM).
Q: What is the warranty on surplus/refurbished units?
A: Konmask.com provides a 90-day functional warranty on all inspected units. Extended warranty options are available — contact us for details.
Q: Can you provide a test report or functional verification certificate?
A: Yes, bench-test reports are available for critical orders. Please request at time of inquiry.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: [email protected] | +0086 19859288691
