DCS Field Interface Solution — Honeywell DC-TFB402 51307616-176 | FIM4 NR IOTA Series
Where This Product Is Used
The Honeywell DC-TFB402 (P/N 51307616-176) is a Field Interface Module (FIM) — Non-Redundant IOTA, Coated designed for deployment within Honeywell’s TotalPlant Solution (TPS) / PlantScape / Experion PKS distributed control systems. It serves as the critical bridge between field instrumentation and the DCS controller infrastructure.
Typical installation environments include:
- Oil & Gas refineries — process variable acquisition from pressure, temperature, and flow transmitters
- Petrochemical plants — analog I/O marshalling in hazardous-area cabinets
- Power generation facilities — boiler and turbine control loop signal conditioning
- Pulp & Paper mills — continuous process monitoring with legacy TPS infrastructure
- Chemical processing plants — multi-loop PID control with field device integration
- Water treatment facilities — SCADA-linked DCS field I/O expansion
The conformal coating variant (this listing) is specified for environments with elevated humidity, airborne contaminants, or corrosive atmospheres — extending PCB service life in demanding industrial settings.
Technical Specifications
| Manufacturer | Honeywell Process Solutions |
| Part Number | DC-TFB402 |
| Catalog / Order Number | 51307616-176 |
| Module Type | Field Interface Module (FIM) |
| Configuration | Non-Redundant (NR) |
| Mounting | IOTA (I/O Termination Assembly) base-mounted |
| PCB Treatment | Conformal Coated (enhanced environmental protection) |
| Compatible Platform | Honeywell TPS, PlantScape, Experion PKS |
| Communication | FTA bus / DCS backplane interface |
| Operating Temperature | 0°C to 60°C (32°F to 140°F) |
| Weight (approx.) | 220 g |
| Form Factor | Standard Honeywell FIM card format |
Note: Full electrical specifications are available in the Honeywell TPS Field Interface Module product manual. Contact Konmask for datasheet access.
Why Engineers Specify This Model
- Conformal coating — PCB is protected against moisture ingress, dust, and mild chemical exposure; preferred for coastal, offshore, and high-humidity plant environments
- Direct IOTA compatibility — mounts directly onto the standard Honeywell IOTA termination base without adapter hardware, simplifying replacement and hot-swap procedures
- Non-redundant architecture — cost-effective choice for non-critical loops where single-path I/O is acceptable per the plant’s SIL assessment
- Legacy platform continuity — maintains backward compatibility with existing TPS/PlantScape wiring and cabinet infrastructure, avoiding costly re-engineering
- Proven field reliability — Honeywell FIM modules are a benchmark for long-term DCS I/O stability in continuous-process industries
- Exact OEM replacement — sourcing by P/N 51307616-176 ensures pin-for-pin, firmware-compatible substitution with no reconfiguration required
Complete System Bill of Materials
The DC-TFB402 operates as part of a coordinated Honeywell DCS I/O subsystem. A complete field interface assembly typically includes:
- DC-TFB402 51307616-176 — FIM4 NR IOTA, Coated (this item)
- Honeywell IOTA Termination Assembly (FTA) — field wiring termination base
- Honeywell FIM Power Supply Module — local I/O power conditioning
- Honeywell High-Performance Process Manager (HPM) or C300 Controller
- DCS Cabinet / Marshalling Panel with DIN rail and cable management
- Shielded twisted-pair field cables (per Honeywell wiring specification)
- Surge protection / isolator barriers (for hazardous-area installations)
Konmask can assist with sourcing complementary components. Contact our team for a complete BOM quotation.
Compliance & Industry Standards
- CE Marking — European conformity for industrial control equipment
- UL Listed — Underwriters Laboratories industrial control equipment certification
- RoHS Compliant — restriction of hazardous substances in electronic assemblies
- IEC 61131 — programmable controller hardware compatibility framework
- ISA-5.1 — instrumentation symbols and identification standards alignment
- ATEX / IECEx — consult plant safety engineer for hazardous-area installation classification requirements
Compliance documentation available upon request. Certificates are provided with shipment for verified-new units.
Quality Assurance & Sourcing
Konmask.com specializes in the procurement of industrial automation components for MRO (Maintenance, Repair & Operations) and capital project requirements. Our sourcing process for the DC-TFB402 includes:
- Traceability — each unit is documented with supplier chain-of-custody records
- Visual & functional inspection — modules are inspected for physical integrity prior to dispatch
- Anti-counterfeit screening — cross-referenced against Honeywell part markings and label authentication
- Secure packaging — ESD-safe bags, foam-lined cartons, and moisture barrier packaging for international shipment
- Warranty — 90-day replacement warranty on verified-serviceable units; new units carry full OEM warranty
How to Source This Part
To request a quote or place an order for the Honeywell DC-TFB402 51307616-176:
- Email: support@konmask.com
- Phone / WhatsApp: +0086 19859288691
- Website: https://konmask.com
Please include your required quantity, delivery timeline, and destination country when enquiring. We respond to all RFQs within 1 business day.
Application-Specific FAQ
Q: Can the DC-TFB402 replace an existing FIM4 module without reconfiguration?
A: Yes. The 51307616-176 is a direct OEM replacement. It mounts on the same IOTA base and is recognized by the DCS controller without parameter changes, provided the firmware revision is compatible with your system version.
Q: What is the difference between the coated and non-coated variants?
A: The conformal-coated version (this listing, -176 suffix) has an additional protective lacquer layer applied to the PCB, providing resistance to humidity, condensation, and mild corrosive atmospheres. It is specified for offshore platforms, coastal plants, and high-humidity process areas.
Q: Is this module compatible with Experion PKS as well as TPS?
A: The DC-TFB402 is primarily a TPS/PlantScape-era component. Compatibility with Experion PKS depends on the specific I/O subsystem configuration. Consult your Honeywell system integrator or contact Konmask for a compatibility assessment.
Q: Do you supply new or refurbished units?
A: Konmask supplies both new (factory-sealed) and verified-serviceable (tested, inspected) units depending on availability. Stock condition is confirmed at the time of quotation.
Q: What is the lead time for this part?
A: Lead time varies by stock availability. In-stock units typically ship within 3–5 business days. For out-of-stock items, sourcing lead time is 2–6 weeks. Contact us for current availability.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






