HONEYWELL SC-PCMX01 Control Module 51307195-175 | Replacement, Equivalent & Selection Guide
The HONEYWELL SC-PCMX01 (P/N 51307195-175) is a high-reliability DCS Control Module designed for the Experion PKS (Process Knowledge System) platform. This page provides complete technical specifications, verified compatible replacements, a structured selection guide, and sourcing information to help engineers and procurement teams make confident decisions.
Technical Specifications
| Manufacturer | Honeywell Process Solutions |
| Model / SKU | SC-PCMX01 |
| Part Number | 51307195-175 |
| Series | Experion PKS — Safety Manager / C300 Controller Family |
| Module Type | Process Control Module (PCM) |
| Form Factor | Plug-in card module |
| Weight | 340 g (approx.) |
| Operating Temperature | 0 °C to 60 °C |
| Power Supply | Via backplane (Experion chassis) |
| Communication | FTE (Fault Tolerant Ethernet) / ControlNet |
| Redundancy Support | Yes — hot-standby redundant pair capable |
| Certifications | CE, UL, FM (refer to Honeywell datasheet for full listing) |
Compatible Replacement & Equivalent Models
When the SC-PCMX01 is unavailable or end-of-life, the following models may serve as functional equivalents depending on firmware revision and chassis compatibility. Always verify with your system integrator before substitution.
| Model | Brand | Compatibility Notes |
|---|---|---|
| SC-PCMX02 | Honeywell | Next-generation variant; firmware upgrade may be required |
| 51307195-176 | Honeywell | Revised part number; functionally equivalent in most configurations |
| CC-PCF901 | Honeywell (Experion C300) | Different series; requires chassis and I/O adapter verification |
| PM I/O Module (ABB) | ABB | Cross-brand; requires full system migration — not a drop-in replacement |
⚠ Disclaimer: Cross-brand replacements require engineering validation. Konmask.com recommends OEM-sourced modules for safety-critical applications.
Why Choose the Original Model
- Guaranteed firmware compatibility with existing Experion PKS configurations — no re-engineering required.
- Honeywell factory warranty and full lifecycle support through Honeywell Process Solutions.
- Validated redundancy — the SC-PCMX01 is pre-qualified for hot-standby redundant controller pairs.
- Regulatory traceability — original part numbers are required for SIL-rated and FDA-regulated installations.
- Reduced commissioning risk — plug-and-play replacement within the same chassis generation.
Typical Applications
- Oil & gas upstream/downstream process control (SCADA integration)
- Petrochemical and refinery DCS upgrades and spare-part stocking
- Power generation plant automation (boiler, turbine, BOP control)
- Pharmaceutical manufacturing (FDA 21 CFR Part 11 compliant environments)
- Pulp & paper and chemical batch process control
- Water treatment and municipal utility automation
System Compatibility
| Compatible Platform | Honeywell Experion PKS R400 and above |
| Chassis | Experion Series A / Series C controller chassis |
| I/O Modules | Compatible with SC-series I/O (SC-XAIA01, SC-XAOA01, etc.) |
| Engineering Station | Experion Station R400+ with Control Builder |
| Network | FTE (Fault Tolerant Ethernet) — dual-ring topology |
Selection Guide
Use the following criteria to determine whether the SC-PCMX01 is the right module for your project:
- Step 1 — Confirm platform: Verify your DCS is Honeywell Experion PKS. The SC-PCMX01 is not compatible with Honeywell TDC 3000 or PlantScape systems.
- Step 2 — Check chassis generation: Confirm Series A or Series C chassis. Series B chassis may require an adapter plate.
- Step 3 — Firmware revision: Match the module firmware to your Experion server revision (R400–R520). Contact Konmask for firmware verification.
- Step 4 — Redundancy requirement: If hot-standby redundancy is required, order in pairs (2× SC-PCMX01).
- Step 5 — Regulatory environment: For SIL 2/3 or FDA-regulated sites, confirm the module’s safety certification revision with Honeywell before procurement.
Quality Assurance & Sourcing
- ✅ OEM-sourced or factory-refurbished units with full traceability documentation
- ✅ Functional test report available upon request for refurbished units
- ✅ Anti-counterfeit inspection — all modules inspected against Honeywell genuine part markings
- ✅ Secure ESD-safe packaging with humidity indicator card
- ✅ 90-day warranty on all units shipped from Konmask.com
How to Order
- Add the SC-PCMX01 (51307195-175) to your cart, or contact us for bulk/project pricing.
- Provide your Experion PKS revision and chassis generation for compatibility confirmation.
- Request a proforma invoice for procurement/finance approval.
- Choose DHL Express, FedEx, or sea freight — worldwide shipping available.
- Receive your module with test report, packing list, and certificate of conformance.
📧 Email: [email protected] | 📞 Phone/WhatsApp: +0086 19859288691
Replacement & Compatibility FAQ
Q: Can the SC-PCMX01 replace the 51307195-176 directly?
A: In most Experion PKS R400–R520 installations, yes. However, confirm the firmware revision suffix matches your system’s qualified spare list.
Q: Is the SC-PCMX01 compatible with Honeywell TDC 3000?
A: No. The SC-PCMX01 is exclusively for the Experion PKS platform. TDC 3000 uses a different module family (e.g., MC-TDOY22).
Q: Can I use a refurbished SC-PCMX01 in a SIL-rated loop?
A: Only if the refurbished unit carries a valid safety certification revision. Konmask can provide documentation — contact us before ordering for SIL applications.
Q: What is the lead time for a new OEM unit?
A: New OEM units typically have 8–16 week lead times from Honeywell. Konmask.com maintains stock of tested units for immediate shipment.
Q: Do you offer exchange/core return programs?
A: Yes. Contact [email protected] to discuss exchange pricing for your faulty SC-PCMX01 core.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: [email protected] | +0086 19859288691
