HONEYWELL SPS5710-2-LF 51198685-100 Power Supply Module | Replacement, Equivalent & Selection Guide
The HONEYWELL SPS5710-2-LF (P/N: 51198685-100) is a dedicated power supply module designed for use within Honeywell’s distributed control system (DCS) and process automation platforms. This page provides full technical specifications, compatible replacement options, application guidance, and sourcing information to help engineers and procurement teams make confident, spec-accurate decisions.
Technical Specifications
- Manufacturer: Honeywell Process Solutions
- Part Number: SPS5710-2-LF / 51198685-100
- Module Type: Power Supply Module
- Form Factor: DIN-rail / rack-mount (DCS chassis compatible)
- Input Voltage: 85–264 VAC / 100–370 VDC (wide-range universal input)
- Output Voltage: 24 VDC regulated
- Output Current: Refer to datasheet for rated amperage
- Isolation: Galvanic isolation between input and output
- Operating Temperature: 0°C to +60°C
- Compliance: CE, UL listed; RoHS-compliant (LF = Lead-Free)
- Weight: ~500 g
- Communication: Status/fault signal output for system diagnostics
Note: Always verify specifications against the official Honeywell datasheet before substitution in safety-critical systems.
Compatible Replacement & Equivalent Models
The following models are commonly evaluated as functional equivalents or drop-in replacements for the SPS5710-2-LF. Compatibility depends on chassis generation, firmware revision, and system configuration — always validate before installation.
- HONEYWELL 51198685-100 – OEM alternate P/N (same unit, different label)
- HONEYWELL SPS5710-1-LF – Single-output variant; verify output rating match
- HONEYWELL CC-PWRR01 / CC-PWRS01 – C300 controller power supply; different platform, verify chassis compatibility
- HONEYWELL 51309512-175 – Legacy PSU used in TDC 3000 / TPS systems; verify pinout
- Third-party 24VDC DIN-rail PSU – Must match output voltage, current rating, isolation class, and connector footprint; not recommended for SIL-rated loops without re-validation
⚠ Disclaimer: Cross-references are provided for reference only. Konmask.com does not guarantee interchangeability. Consult your system integrator or Honeywell support before substitution.
Why Choose the Original Model
- OEM Guaranteed Compatibility: Engineered and validated for Honeywell DCS chassis — no firmware or hardware conflicts
- Safety Integrity: Maintains system SIL ratings and CE/UL certifications when used as specified
- Fault Diagnostics: Integrated status output enables predictive maintenance via DCS health monitoring
- Long Service Life: Industrial-grade components rated for continuous 24/7 operation in harsh environments
- Warranty & Support: Eligible for Honeywell service contracts and spare-parts programs
Typical Applications
- Honeywell Experion PKS / TPS / TDC 3000 DCS power distribution
- Process control cabinets in oil & gas, refining, and petrochemical plants
- Power backup and redundancy configurations in critical control loops
- Pharmaceutical and chemical batch process automation
- Power conditioning for I/O modules and field device interfaces
System Compatibility
- Primary Platform: Honeywell Experion PKS (Process Knowledge System)
- Legacy Platforms: TPS (Total Plant Solution), TDC 3000
- Chassis Compatibility: Verify against specific chassis model and slot assignment
- Redundancy Support: Supports N+1 redundant PSU configurations (chassis-dependent)
- Not Compatible With: Honeywell Safety Manager, HC900 Hybrid Controller (different PSU architecture)
Selection Guide
Use the following criteria to confirm the SPS5710-2-LF is the right choice for your application:
- ✅ Platform match: Your system is Experion PKS, TPS, or TDC 3000
- ✅ Input power: Site supply is 85–264 VAC or 100–370 VDC
- ✅ Output requirement: 24 VDC regulated output required for I/O or controller modules
- ✅ Compliance: RoHS / Lead-Free requirement applies (LF suffix)
- ✅ Redundancy: Dual-output (2-LF) configuration needed for redundant power rail
- ⚠ If output current is insufficient: Consider SPS5710-3-LF or higher-rated variant
- ⚠ If platform is C300/C200: Evaluate CC-PWRR01 series instead
Quality Assurance & Sourcing
- Sourcing: Konmask.com sources from authorized distributors and verified industrial surplus channels
- Inspection: All units undergo visual inspection and functional verification prior to dispatch
- Authenticity: Original Honeywell labeling, serial numbers, and firmware intact
- Condition: New, refurbished, or tested-used — clearly stated per listing
- Packaging: ESD-safe packaging with anti-static foam; double-boxed for international shipment
- Documentation: Certificate of conformance and test report available on request
How to Order
- Step 1: Confirm part number: SPS5710-2-LF / 51198685-100
- Step 2: Specify quantity and required condition (new / refurbished / tested)
- Step 3: Add to cart or contact us for bulk pricing and lead time
- Step 4: Provide shipping destination for freight quote (DDP/DAP available)
- Step 5: Receive order confirmation with tracking and documentation package
📧 Email: support@konmask.com
📞 Phone/WhatsApp: +0086 19859288691
🌐 Website: https://Konmask.com
Replacement & Compatibility FAQ
Q: Can I use SPS5710-1-LF instead of SPS5710-2-LF?
A: The -1-LF is a single-output variant. If your chassis requires dual-output power rails, the -2-LF is required. Verify your chassis wiring diagram before substitution.
Q: Is 51198685-100 the same as SPS5710-2-LF?
A: Yes. 51198685-100 is Honeywell’s internal part number (P/N) for the SPS5710-2-LF module. Both refer to the same hardware.
Q: Can a generic 24VDC DIN-rail PSU replace this module?
A: Electrically possible in some cases, but not recommended. The OEM module includes chassis-specific connectors, fault signaling, and certification compliance that generic PSUs lack.
Q: What is the lead time for this module?
A: In-stock units ship within 1–3 business days. Out-of-stock items typically have a 2–6 week lead time. Contact us for current availability.
Q: Do you provide a warranty?
A: Yes. All units carry a minimum 90-day functional warranty. Extended warranty available on request.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691


